Hello, I really can't figure what is going on, so I will just say it. My monitor started around 2 days ago to flicker; it happens around every 1 minute and it flickers twice, in very rare cases 3 times. It is not like going blank but more like a brief shutdown or detecting of a source. The monitor is a Dell IPS P 23.8" series, bought it around 3 weeks ago, no problems, and it is connected via DVI to a Asus HD6950 card. To the same card but via HDMI is connected a Yamaha AV receiver and to the AVR a Samsung TV also via HDMI.
Didn't get any problems until recently when due to some power surge (got a UPS, protects everything, but shut down the TV and the AVR) the TV didn't seems to recognize it's HDMI in. Updated firmware, reset, swaped cables and everything was fine. But I still got the issue with my monitor; it didn't appear at the same time though! Maybe due to updates.
I have something in the logs and it seems closely related:
12/28/13 04:36:17 PM ALSA hda_eld.c 34 HDMI: ELD buf size is 0, force 128
12/28/13 04:36:17 PM ALSA hda_eld.c 51 HDMI: invalid ELD data byte 0
it just keeps on repeating, I do use the HDMI for audio. But it doesn't matter if I stop the TV and the AVR the monitor still flickers. Also I got intermittent sound out via HDMI (seems more one or another, the monitor and the sound) as I can see clearly how the AVR stops decoding signal.
In xorgs logs I get this which confirms it detecs the monitor at that time:
Information [ 26027.285] (II) fglrx(0): Hot-plug event occurs on device: 7:0:0
Information [ 26027.337] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
Information [ 26027.337] (II) fglrx(0): EDID vendor "DEL", prod id 41115
Information [ 26027.337] (II) fglrx(0): Using hsync ranges from config file
Information [ 26027.337] (II) fglrx(0): Using vrefresh ranges from config file
Information [ 26027.337] (II) fglrx(0): Printing DDC gathered Modelines:
Information [ 26027.337] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
Information [ 26027.337] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Information [ 26027.338] (II) fglrx(0): User Preference Output DFP11 using refresh rate 60.0 Hz.
Information [ 26027.346] (II) fglrx(0): xdl_xs114_atiddxDisplayScreenEnableDisplays
Information [ 26027.717] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
Information [ 26027.717] (II) fglrx(0): EDID vendor "DEL", prod id 41115
Information [ 26027.717] (II) fglrx(0): Using hsync ranges from config file
Information [ 26027.717] (II) fglrx(0): Using vrefresh ranges from config file
Information [ 26027.717] (II) fglrx(0): Printing DDC gathered Modelines:
Information [ 26027.717] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
Information [ 26027.717] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Information [ 26027.717] (II) fglrx(0): User Preference Output DFP11 using refresh rate 60.0 Hz.
I just can't work anymore. Any thoughts?
Didn't get any problems until recently when due to some power surge (got a UPS, protects everything, but shut down the TV and the AVR) the TV didn't seems to recognize it's HDMI in. Updated firmware, reset, swaped cables and everything was fine. But I still got the issue with my monitor; it didn't appear at the same time though! Maybe due to updates.
I have something in the logs and it seems closely related:
12/28/13 04:36:17 PM ALSA hda_eld.c 34 HDMI: ELD buf size is 0, force 128
12/28/13 04:36:17 PM ALSA hda_eld.c 51 HDMI: invalid ELD data byte 0
it just keeps on repeating, I do use the HDMI for audio. But it doesn't matter if I stop the TV and the AVR the monitor still flickers. Also I got intermittent sound out via HDMI (seems more one or another, the monitor and the sound) as I can see clearly how the AVR stops decoding signal.
In xorgs logs I get this which confirms it detecs the monitor at that time:
Information [ 26027.285] (II) fglrx(0): Hot-plug event occurs on device: 7:0:0
Information [ 26027.337] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
Information [ 26027.337] (II) fglrx(0): EDID vendor "DEL", prod id 41115
Information [ 26027.337] (II) fglrx(0): Using hsync ranges from config file
Information [ 26027.337] (II) fglrx(0): Using vrefresh ranges from config file
Information [ 26027.337] (II) fglrx(0): Printing DDC gathered Modelines:
Information [ 26027.337] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
Information [ 26027.337] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
Information [ 26027.337] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Information [ 26027.338] (II) fglrx(0): User Preference Output DFP11 using refresh rate 60.0 Hz.
Information [ 26027.346] (II) fglrx(0): xdl_xs114_atiddxDisplayScreenEnableDisplays
Information [ 26027.717] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
Information [ 26027.717] (II) fglrx(0): EDID vendor "DEL", prod id 41115
Information [ 26027.717] (II) fglrx(0): Using hsync ranges from config file
Information [ 26027.717] (II) fglrx(0): Using vrefresh ranges from config file
Information [ 26027.717] (II) fglrx(0): Printing DDC gathered Modelines:
Information [ 26027.717] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
Information [ 26027.717] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
Information [ 26027.717] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Information [ 26027.717] (II) fglrx(0): User Preference Output DFP11 using refresh rate 60.0 Hz.
I just can't work anymore. Any thoughts?