Hi all,
Am curious to see whether anyone else has this same problem. I've got an Optimus based system with intel and nvidia graphics.
Bumblebee installed, was previously working. Went to launch a GL application today and it failed, investigation revealed the following output:
ooookay? My PCI ID resolves to the GeForce GTX 660M, and it's listed as a supported product in said README here: http://www.nvidia.com/Download/drive...px/72250/en-us
System is up to date with latest patches. Any idea what might be going on? Just 'modprobe nvidia' also fails and yields the same error in the kernel log.
Am curious to see whether anyone else has this same problem. I've got an Optimus based system with intel and nvidia graphics.
Bumblebee installed, was previously working. Went to launch a GL application today and it failed, investigation revealed the following output:
Code:
>dmesg | tail
[106089.402142] nvidia 0000:01:00.0: power state changed by ACPI to D0
[106089.402233] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
[106089.402296] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0fd4)
NVRM: installed in this system is not supported by the 331.38
NVRM: NVIDIA Linux driver release. Please see 'Appendix
NVRM: A - Supported NVIDIA GPU Products' in this release's
NVRM: README, available on the Linux driver download page
NVRM: at www.nvidia.com.
[106089.402370] nvidia: probe of 0000:01:00.0 failed with error -1
[106089.402998] NVRM: The NVIDIA probe routine failed for 1 device(s).
[106089.403001] NVRM: None of the NVIDIA graphics adapters were initialized!
[106089.403003] [drm] Module unloaded
[106089.403170] NVRM: NVIDIA init module failed!Code:
# hwinfo --gfxcard
10: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: _Znp.3H63STgg632
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel VGA compatible controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0166
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x10d8
Revision: 0x09
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xf6400000-0xf67fffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
I/O Ports: 0xf000-0xf03f (rw)
IRQ: 46 (3374062 events)
Module Alias: "pci:v00008086d00000166sv00001462sd000010D8bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=no, avail=yes, need=no, active=unknown
23: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: VCu0.D+hrRxa8XJ9
Parent ID: vSkL.LtivxUYcBVC
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia VGA compatible controller"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0fd4
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x10d8
Revision: 0xff
Memory Range: 0xf5000000-0xf5ffffff (rw,non-prefetchable)
Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
Memory Range: 0xf0000000-0xf1ffffff (ro,non-prefetchable)
I/O Ports: 0xe000-0xefff (rw)
Memory Range: 0xf6000000-0xf607ffff (ro,non-prefetchable)
IRQ: 16 (856101 events)
Module Alias: "pci:v000010DEd00000FD4sv00001462sd000010D8bc03sc00i00"
Driver Info #0:
Driver Status: nvidiafb is not active
Driver Activation Cmd: "modprobe nvidiafb"
Driver Info #1:
Driver Status: nouveau is not active
Driver Activation Cmd: "modprobe nouveau"
Driver Info #2:
Driver Status: nvidia is not active
Driver Activation Cmd: "modprobe nvidia"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)
Primary display adapter: #10