I am running a brand new install of openSUSE 13.1 (KDE). I have run the 1-click update script that adds the packman repository, and updates and codecs for K3B. I am attempting to copy a commercial CD (that I own) using K3B. So far, I have made multiple attempts that have all failed during during the operation of writing to the blank target disc. In each instance, the first several tracks are written, then a failure occurs. The K3B on-screen error display referred to a problem with permissions to write to the device. I've tweaked the configuration to use the "burning" group, added my user identity to that group, but it still failed. I re-attempted the operation logged in as root so as to test the validity of the permissions error. The operation failed again, at about the same point, though the error reported on the display was different - it suggested that trying TAO instead of DAO might resolve the problem. In a subsequent try, it didn't.
I am using disc media from a supply that has worked fine in this (internal) writer for a long time (under different OS's on this same system).
Any advice for other configuration or update steps I can apply to enable smooth K3B operation copying commercial CD's would be appreciated. I intend to create copies of CD's and DVD's that I own to create primary use media, and to preserve my original purchased discs.
Thank you,
John
PS. Tail end of error log from first burn failure (before I started my own ineffective troubleshooting efforts) is shown below.
Track 08: Total bytes read/written: 26490576/26490576 (11263 sectors).
Starting new track at sector: 90505
Track 09: 0 of 30 MB written.
Track 09: 1 of 30 MB written (fifo 100%) [buf 98%] 11.9x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 01 64 62 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 01 61 E8 0A 00 2B 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 90600 (valid)
cmd finished after 5.651s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 1714608 bytes
Writing time: 151.502s
Average write speed 33.8x.
Min drive buffer fill was 97%
Fixating...
Fixating time: 0.001s
/usr/bin/wodim: fifo had 3574 puts and 3384 gets.
/usr/bin/wodim: fifo was 0 times empty and 3314 times full, min fill was 98%.
BURN-Free was never needed.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -sao driveropts=burnfree textfile=/tmp/qt_temp.E11454 -useinfo -audio -shorttrack
I am using disc media from a supply that has worked fine in this (internal) writer for a long time (under different OS's on this same system).
Any advice for other configuration or update steps I can apply to enable smooth K3B operation copying commercial CD's would be appreciated. I intend to create copies of CD's and DVD's that I own to create primary use media, and to preserve my original purchased discs.
Thank you,
John
PS. Tail end of error log from first burn failure (before I started my own ineffective troubleshooting efforts) is shown below.
Track 08: Total bytes read/written: 26490576/26490576 (11263 sectors).
Starting new track at sector: 90505
Track 09: 0 of 30 MB written.
Track 09: 1 of 30 MB written (fifo 100%) [buf 98%] 11.9x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 01 64 62 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 01 61 E8 0A 00 2B 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 90600 (valid)
cmd finished after 5.651s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 1714608 bytes
Writing time: 151.502s
Average write speed 33.8x.
Min drive buffer fill was 97%
Fixating...
Fixating time: 0.001s
/usr/bin/wodim: fifo had 3574 puts and 3384 gets.
/usr/bin/wodim: fifo was 0 times empty and 3314 times full, min fill was 98%.
BURN-Free was never needed.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -sao driveropts=burnfree textfile=/tmp/qt_temp.E11454 -useinfo -audio -shorttrack