Hey there. Newby here.
recently switched to 12.3 xfce. trying to install burning tool. trouble with brasero, so i choose k3b which worked out fin over the years. but every time I try to burn, it ejects the cd while sending cue-sheet.
System
-----------------------
K3b Version: 1.0.5
KDE Version: 3.5.10 "release 262"
QT Version: 3.3.8c
Kernel: 3.7.10-1.28-default
Devices
-----------------------
SAMSUNG CDRW/DVD SN-324F U203 (/dev/sr0, /dev/sg1) [CD-R, CD-RW, CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 162
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'SAMSUNG '
Identification : 'CDRW/DVD SN-324F'
Revision : 'U203'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0010 (DVD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size : 12582912 = 12288 KB
pregap1: -1
Track 01: audio 516 MB (51:09.97) no preemp swab copy
Total size: 516 MB (51:09.97) = 230248 sectors
Lout start: 516 MB (51:11/73) = 230248 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 129598
Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
Speed set to 4226 KB/s
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D5 28 00 02 9A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 3.765s timeout 200s
/usr/bin/X11/wodim: Could not write Lead-in.
SAO startsec: -11634
Writing lead-in...
write CD-Text data: error after 63936 bytes
Writing time: 29.091s
BURN-Free was never needed.
/usr/bin/X11/wodim: fifo had 192 puts and 0 gets.
/usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -dao driveropts=burnfree textfile=/tmp/k3bSECaMw.dat -eject -useinfo -audio /tmp/kde-captain/k3b_audio_1_01.inf
could someone PLEASE tell me whats the problem?
thanx in advance :)
recently switched to 12.3 xfce. trying to install burning tool. trouble with brasero, so i choose k3b which worked out fin over the years. but every time I try to burn, it ejects the cd while sending cue-sheet.
Quote:
System
-----------------------
K3b Version: 1.0.5
KDE Version: 3.5.10 "release 262"
QT Version: 3.3.8c
Kernel: 3.7.10-1.28-default
Devices
-----------------------
SAMSUNG CDRW/DVD SN-324F U203 (/dev/sr0, /dev/sg1) [CD-R, CD-RW, CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 162
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'SAMSUNG '
Identification : 'CDRW/DVD SN-324F'
Revision : 'U203'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0010 (DVD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1959936 = 1914 KB
FIFO size : 12582912 = 12288 KB
pregap1: -1
Track 01: audio 516 MB (51:09.97) no preemp swab copy
Total size: 516 MB (51:09.97) = 230248 sectors
Lout start: 516 MB (51:11/73) = 230248 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 129598
Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
Speed set to 4226 KB/s
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D5 28 00 02 9A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 3.765s timeout 200s
/usr/bin/X11/wodim: Could not write Lead-in.
SAO startsec: -11634
Writing lead-in...
write CD-Text data: error after 63936 bytes
Writing time: 29.091s
BURN-Free was never needed.
/usr/bin/X11/wodim: fifo had 192 puts and 0 gets.
/usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -dao driveropts=burnfree textfile=/tmp/k3bSECaMw.dat -eject -useinfo -audio /tmp/kde-captain/k3b_audio_1_01.inf
thanx in advance :)