I made a regular update on my opensuse 13.1 today and after I rebooted my wireless card no longer work.
Here are some data about my setup:
It's a HP Pavillion notebook:
lspci:
hwinfo --netcard:
rfkill list:
iwconfig
dmesg | less:
I have installed the b43-firmware but didn't help. Any suggestion?
Here are some data about my setup:
It's a HP Pavillion notebook:
lspci:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)Code:
31: PCI 200.0: 0280 Network controller
[Created at pci.319]
Unique ID: B35A.8rd6TlLYjDF
Parent ID: 8otl.G5Dfw+ssufC
SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Broadcom Network controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4727
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1483
Revision: 0x01
Driver: "bcma-pci-bridge"
Driver Modules: "bcma"
Memory Range: 0xf0200000-0xf0203fff (rw,non-prefetchable)
IRQ: 16 (437 events)
Module Alias: "pci:v000014E4d00004727sv0000103Csd00001483bc02sc80i00"
Driver Info #0:
Driver Status: bcma is active
Driver Activation Cmd: "modprobe bcma"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)rfkill list:
Code:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: noCode:
eno1 no wireless extensions.
ppp0 no wireless extensions.
lo no wireless extensions.
wwp0s18f2u1i1 no wireless extensions.dmesg | less:
Code:
[ 136.125021] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 136.125046] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 136.125066] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 136.125100] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 136.137386] bcma: bus0: Bus registered