Hello everyone,
I have a Lenovo P1 (2nd) with an Nvidia Quadro T2000 and Intel Graphics. To use switchable graphics I want to use Bumblebee (https://en.opensuse.org/SDB:NVIDIA_Bumblebee). After a new installation of OpenSUSE Leap 15.1 with kernel-default-4.12.14-lp151.28.36.1.x86_64 I followed the instructions of https://forums.opensuse.org/showthre...-safe-quot-way and everything worked fine.
Unfortunately, my wifi-card (Intel® Wi-Fi 6 AX200 160MHz) works only with kernels 5.1+ (source: https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html) so I had to do a kernel update:
I ran:
After that the wifi-card works, but Bumblebee does not:
(Both worked fine before the kernel upgrade)
However:
Trying to load the kernel module:
Please let me know if I should add more information. When booting the "old" kernel Bumblebee works fine.
All help is welcome and an (easy?) workaround to get the wifi-card working on the 4.12 kernel would also be useful. Thanks a lot in advance! (I thought of the obvious workaround to use a usb wifi adapter, but it would be great if there was an other solution.)
Best,
Luke
I have a Lenovo P1 (2nd) with an Nvidia Quadro T2000 and Intel Graphics. To use switchable graphics I want to use Bumblebee (https://en.opensuse.org/SDB:NVIDIA_Bumblebee). After a new installation of OpenSUSE Leap 15.1 with kernel-default-4.12.14-lp151.28.36.1.x86_64 I followed the instructions of https://forums.opensuse.org/showthre...-safe-quot-way and everything worked fine.
Unfortunately, my wifi-card (Intel® Wi-Fi 6 AX200 160MHz) works only with kernels 5.1+ (source: https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html) so I had to do a kernel update:
I ran:
Code:
zypper ar -f -p 20 https://download.opensuse.org/repositories/Kernel:/stable/standard/ kernel:stableCode:
zypper -vv dup --allow-vendor-change --from kernel:stableCode:
uname -r
5.5.5-4.gbfcbf21-defaultCode:
optirun --status
Bumblebee status: Error (3.2.1): Could not load GPU driverCode:
optirun glxgears
[ 4526.224967] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 4526.225044] [ERROR]Aborting because fallback start is disabled.However:
Code:
systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-02-24 16:15:48 CET; 18min ago
Main PID: 5456 (bumblebeed)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/bumblebeed.service
└─5456 /usr/sbin/bumblebeedCode:
sudo modprobe bbswitch
modprobe: FATAL: Module bbswitch not found in directory /lib/modules/5.5.5-4.gbfcbf21-defaultPlease let me know if I should add more information. When booting the "old" kernel Bumblebee works fine.
All help is welcome and an (easy?) workaround to get the wifi-card working on the 4.12 kernel would also be useful. Thanks a lot in advance! (I thought of the obvious workaround to use a usb wifi adapter, but it would be great if there was an other solution.)
Best,
Luke