I've got a Ceton InfiniTV cable capture card in my HTPC backend. I can view any channel I want using mplayer. However, the latests versions (0.27 and up) of MythTV don't support direct access to the card, but require RTP streaming. I can't for the life of me get RTP streaming to work.
Using the web interface on the cable capture card, I select a channel that I know works and under streaming, select "Started" and then "Save Streaming options". The status stuff shows that it is streaming, so I should be good. However, when I try to view that stream via VLC, I get nothing. Using VLC, I select Media | Open Network Stream. I enter "rtp://@:8000" and hit play. I've tried adding the IP address of the tuner card (rtp://@192.168.200.1:8000), but again, nothing happens.
Does anybody know of any other way I can test my rtp streaming besides VLC?
Using the web interface on the cable capture card, I select a channel that I know works and under streaming, select "Started" and then "Save Streaming options". The status stuff shows that it is streaming, so I should be good. However, when I try to view that stream via VLC, I get nothing. Using VLC, I select Media | Open Network Stream. I enter "rtp://@:8000" and hit play. I've tried adding the IP address of the tuner card (rtp://@192.168.200.1:8000), but again, nothing happens.
Does anybody know of any other way I can test my rtp streaming besides VLC?