dear forum,
I would like to architect a bunch of SLES11 / Windows domU on two physical opensuse13.1 gnome servers interconnected with wifi cards or cross-over cable on ethernet cards, xen is 4.3
several doubts:
1. do i need cross-over cable or regular ethernet cable would work ( no router ) ?
2. do i need two connections on hypervisor ( xen with virt-manager ) with 2 virtual bridges, but how do I set up them in order to have all vm domU communicating ?
3. is it easier to configure networks with ifup or with network manager ?
despite good experience with single machine setup, i feel lost especially with 2..
for one server,
eth0 was not used, virbr0 was set up: 192.168.122.0 ( range 192.168.122.1-255) and NAT
where
host xx.bla.com 192.168.122.1
gateway equal
static or dhcp domU yy.bla.com 192.168.122.2
dhcp allows to connect to internet via firefox, static wouldn't not allow
Any help is welcome !
I would like to architect a bunch of SLES11 / Windows domU on two physical opensuse13.1 gnome servers interconnected with wifi cards or cross-over cable on ethernet cards, xen is 4.3
several doubts:
1. do i need cross-over cable or regular ethernet cable would work ( no router ) ?
2. do i need two connections on hypervisor ( xen with virt-manager ) with 2 virtual bridges, but how do I set up them in order to have all vm domU communicating ?
3. is it easier to configure networks with ifup or with network manager ?
despite good experience with single machine setup, i feel lost especially with 2..
for one server,
eth0 was not used, virbr0 was set up: 192.168.122.0 ( range 192.168.122.1-255) and NAT
where
host xx.bla.com 192.168.122.1
gateway equal
static or dhcp domU yy.bla.com 192.168.122.2
dhcp allows to connect to internet via firefox, static wouldn't not allow
Any help is welcome !