System:
openSuse 13.1 (oem)
Toshiba P200-10a (not modified)
Hello,
did anyone ever get managed a clear installation onto Harddisc?
I play around with SuseStudio since a year, everything works as long as we dont talk about yast-live-installer.
So what happens?
the appliance is written using:
it boots up and seems working good. Finaly i go through YaST2 to the YaST-Live-Installer and complete the whole installation process.
Where i set:
shutting System Down -> Remove USB Stick -> Grub2 boots successfull:
I see, (sometimes) 3 overlapping green loading bars on the bottom of the Screen
and sometimes just the generic openSuse background image (with the "build with suse studio" brand).
Thats all. Nothing happens anymore.
If i press F2, i come to a console screen that says:
This SanDisc thing is the USB-Drive where i did the installation from.
It makes no difference what key you press, the message just repeats. Also there is no difference if
the stick is plugged in or not.
Do someone know whats going on there and how i can fix this?
As i mentioned befor. All my Appliance work in VirtaulMachines, as LiveDisks and EC2-images.
Its just impossible to set it up.
openSuse 13.1 (oem)
Toshiba P200-10a (not modified)
Hello,
did anyone ever get managed a clear installation onto Harddisc?
I play around with SuseStudio since a year, everything works as long as we dont talk about yast-live-installer.
So what happens?
the appliance is written using:
Code:
sudo dd if=/MyAppliance.i686-0.0.1.raw of=/dev/sdh bs=4MWhere i set:
| sda1 | 350 MB | /boot |
| sda2 | 50 GB | / |
| sda3 | 6 GB | /swap |
| sda4 | 143 GB | /home |
shutting System Down -> Remove USB Stick -> Grub2 boots successfull:
I see, (sometimes) 3 overlapping green loading bars on the bottom of the Screen
and sometimes just the generic openSuse background image (with the "build with suse studio" brand).
Thats all. Nothing happens anymore.
If i press F2, i come to a console screen that says:
Code:
Trying manual resume from /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2
resume device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2 not found (ignoring)
Trying manual resume from /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2
resume device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2 not found (ignoring)
Waiting for device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1 to appear ..................................................
Could not find /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1
Want me to fall back to /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1 ? <Y/n>It makes no difference what key you press, the message just repeats. Also there is no difference if
the stick is plugged in or not.
Do someone know whats going on there and how i can fix this?
As i mentioned befor. All my Appliance work in VirtaulMachines, as LiveDisks and EC2-images.
Its just impossible to set it up.