Hi,
I need your help. recently purchased Wacom Intuos Pro is not recognized as a device on my OpenSUSE 13.1
I did some research in the net and tried most of steps already described - no success :(.
Following components are installed:
libwacom-data; libwacom-tools; libwacoms; xf86-input-wacom.
libwacom-tools change log says: Intuos Pro is supported since October 10, 2013
plugging Wacom Intuos Pro
/var/log/messages:
/var/log/Xorg.0.log:
few other details:
here I am a bit lost.
it looks like device triggers needed actions, but when it comes to the Wacom drivers - the device is not recognized.
can you help?
Andrey
I need your help. recently purchased Wacom Intuos Pro is not recognized as a device on my OpenSUSE 13.1
I did some research in the net and tried most of steps already described - no success :(.
Following components are installed:
libwacom-data; libwacom-tools; libwacoms; xf86-input-wacom.
libwacom-tools change log says: Intuos Pro is supported since October 10, 2013
Code:
sudo /sbin/modprobe -r wacom
gives empty reply
/var/log/messages:
Code:
2014-09-14T20:42:28.982709+02:00 linux1 kernel: [ 9861.437545] usb 3-10: new full-speed USB device number 52 using xhci_hcd
2014-09-14T20:42:28.995703+02:00 linux1 kernel: [ 9861.451050] usb 3-10: New USB device found, idVendor=056a, idProduct=0315
2014-09-14T20:42:28.995707+02:00 linux1 kernel: [ 9861.451051] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2014-09-14T20:42:28.995708+02:00 linux1 kernel: [ 9861.451052] usb 3-10: Product: Intuos5 touch M
2014-09-14T20:42:28.995708+02:00 linux1 kernel: [ 9861.451053] usb 3-10: Manufacturer: Wacom Co.,Ltd.
2014-09-14T20:42:28.996642+02:00 linux1 mtp-probe: checking bus 3, device 52: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10"
2014-09-14T20:42:28.996827+02:00 linux1 mtp-probe: bus: 3, device: 52 was not an MTP device
2014-09-14T20:42:28.998724+02:00 linux1 kernel: [ 9861.454078] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input82
2014-09-14T20:42:28.999761+02:00 linux1 kernel: [ 9861.454795] input: Wacom Intuos Pro M Finger as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input83
2014-09-14T20:42:28.999779+02:00 linux1 kernel: [ 9861.455044] usbcore: registered new interface driver wacom
Code:
[ 9867.123] (II) config/udev: Adding input device Wacom Intuos Pro M Pen (/dev/input/event22)
[ 9867.123] (**) Wacom Intuos Pro M Pen: Applying InputClass "evdev tablet catchall"
[ 9867.123] (**) Wacom Intuos Pro M Pen: Applying InputClass "evdev tablet catchall"
[ 9867.123] (**) Wacom Intuos Pro M Pen: Applying InputClass "Wacom class"
[ 9867.123] (II) LoadModule: "wacom"
[ 9867.123] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so
[ 9867.127] (II) Module wacom: vendor="X.Org Foundation"
[ 9867.127] compiled for 1.14.3, module version = 0.22.1
[ 9867.127] Module class: X.Org XInput Driver
[ 9867.127] ABI class: X.Org XInput driver, version 19.1
[ 9867.127] (II) Using input driver 'wacom' for 'Wacom Intuos Pro M Pen'
[ 9867.127] (**) Wacom Intuos Pro M Pen: always reports core events
[ 9867.127] (**) Option "Device" "/dev/input/event22"
[ 9867.127] (II) Wacom Intuos Pro M Pen: type not specified, assuming 'stylus'.
[ 9867.127] (II) Wacom Intuos Pro M Pen: other types will be automatically added.
[ 9867.127] (**) Option "Mode" "Absolute"
[ 9867.127] (**) Option "PressCurve" "5,0,100,95"
[ 9867.127] (**) Option "Threshold" "60"
[ 9867.127] (--) Wacom Intuos Pro M Pen stylus: Wacom Unknown USB tablet maxX=44704 maxY=27940 maxZ=2047 resX=200000 resY=200000 tilt=enabled
[ 9867.127] (II) Wacom Intuos Pro M Pen stylus: hotplugging dependent devices.
[ 9867.127] (EE) Wacom Intuos Pro M Pen stylus: Invalid type 'touch' for this device.
[ 9867.127] (II) Wacom Intuos Pro M Pen stylus: hotplugging completed.
[ 9867.148] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input82/event22"
[ 9867.148] (II) XINPUT: Adding extended input device "Wacom Intuos Pro M Pen stylus" (type: STYLUS, id 14)
[ 9867.148] (**) Wacom Intuos Pro M Pen stylus: (accel) keeping acceleration scheme 1
[ 9867.148] (**) Wacom Intuos Pro M Pen stylus: (accel) acceleration profile 0
[ 9867.148] (**) Wacom Intuos Pro M Pen stylus: (accel) acceleration factor: 2.000
[ 9867.148] (**) Wacom Intuos Pro M Pen stylus: (accel) acceleration threshold: 4
[ 9867.148] (**) Wacom Intuos Pro M Pen eraser: Applying InputClass "evdev tablet catchall"
[ 9867.148] (**) Wacom Intuos Pro M Pen eraser: Applying InputClass "evdev tablet catchall"
[ 9867.148] (**) Wacom Intuos Pro M Pen eraser: Applying InputClass "Wacom class"
[ 9867.148] (II) Using input driver 'wacom' for 'Wacom Intuos Pro M Pen eraser'
[ 9867.148] (**) Wacom Intuos Pro M Pen eraser: always reports core events
[ 9867.148] (**) Option "Device" "/dev/input/event22"
[ 9867.148] (**) Option "Type" "eraser"
[ 9867.148] (**) Option "Mode" "Absolute"
[ 9867.148] (**) Option "PressCurve" "5,0,100,95"
[ 9867.148] (**) Option "Threshold" "60"
[ 9867.148] (--) Wacom Intuos Pro M Pen eraser: Wacom Unknown USB tablet maxX=44704 maxY=27940 maxZ=2047 resX=200000 resY=200000 tilt=enabled
[ 9867.169] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input82/event22"
[ 9867.169] (II) XINPUT: Adding extended input device "Wacom Intuos Pro M Pen eraser" (type: ERASER, id 15)
[ 9867.169] (**) Wacom Intuos Pro M Pen eraser: (accel) keeping acceleration scheme 1
[ 9867.169] (**) Wacom Intuos Pro M Pen eraser: (accel) acceleration profile 0
[ 9867.169] (**) Wacom Intuos Pro M Pen eraser: (accel) acceleration factor: 2.000
[ 9867.169] (**) Wacom Intuos Pro M Pen eraser: (accel) acceleration threshold: 4
[ 9867.169] (**) Wacom Intuos Pro M Pen cursor: Applying InputClass "evdev tablet catchall"
[ 9867.169] (**) Wacom Intuos Pro M Pen cursor: Applying InputClass "evdev tablet catchall"
[ 9867.169] (**) Wacom Intuos Pro M Pen cursor: Applying InputClass "Wacom class"
[ 9867.169] (II) Using input driver 'wacom' for 'Wacom Intuos Pro M Pen cursor'
[ 9867.169] (**) Wacom Intuos Pro M Pen cursor: always reports core events
[ 9867.169] (**) Option "Device" "/dev/input/event22"
[ 9867.169] (**) Option "Type" "cursor"
[ 9867.169] (**) Option "Mode" "Absolute"
[ 9867.169] (**) Option "PressCurve" "5,0,100,95"
[ 9867.169] (**) Option "Threshold" "60"
[ 9867.169] (--) Wacom Intuos Pro M Pen cursor: Wacom Unknown USB tablet maxX=44704 maxY=27940 maxZ=2047 resX=200000 resY=200000 tilt=enabled
[ 9867.181] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input82/event22"
[ 9867.181] (II) XINPUT: Adding extended input device "Wacom Intuos Pro M Pen cursor" (type: CURSOR, id 16)
[ 9867.181] (**) Wacom Intuos Pro M Pen cursor: (accel) keeping acceleration scheme 1
[ 9867.181] (**) Wacom Intuos Pro M Pen cursor: (accel) acceleration profile 0
[ 9867.181] (**) Wacom Intuos Pro M Pen cursor: (accel) acceleration factor: 2.000
[ 9867.181] (**) Wacom Intuos Pro M Pen cursor: (accel) acceleration threshold: 4
[ 9867.181] (**) Wacom Intuos Pro M Pen pad: Applying InputClass "evdev tablet catchall"
[ 9867.181] (**) Wacom Intuos Pro M Pen pad: Applying InputClass "evdev tablet catchall"
[ 9867.181] (**) Wacom Intuos Pro M Pen pad: Applying InputClass "Wacom class"
[ 9867.181] (II) Using input driver 'wacom' for 'Wacom Intuos Pro M Pen pad'
[ 9867.181] (**) Wacom Intuos Pro M Pen pad: always reports core events
[ 9867.181] (**) Option "Device" "/dev/input/event22"
[ 9867.181] (**) Option "Type" "pad"
[ 9867.181] (**) Option "Mode" "Absolute"
[ 9867.181] (**) Option "PressCurve" "5,0,100,95"
[ 9867.181] (**) Option "Threshold" "60"
[ 9867.181] (--) Wacom Intuos Pro M Pen pad: Wacom Unknown USB tablet maxX=44704 maxY=27940 maxZ=2047 resX=200000 resY=200000 tilt=enabled
[ 9867.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input82/event22"
[ 9867.193] (II) XINPUT: Adding extended input device "Wacom Intuos Pro M Pen pad" (type: PAD, id 17)
[ 9867.193] (**) Wacom Intuos Pro M Pen pad: (accel) keeping acceleration scheme 1
[ 9867.193] (**) Wacom Intuos Pro M Pen pad: (accel) acceleration profile 0
[ 9867.193] (**) Wacom Intuos Pro M Pen pad: (accel) acceleration factor: 2.000
[ 9867.193] (**) Wacom Intuos Pro M Pen pad: (accel) acceleration threshold: 4
[ 9867.193] (II) config/udev: Adding input device Wacom Intuos Pro M Finger (/dev/input/event23)
[ 9867.193] (**) Wacom Intuos Pro M Finger: Applying InputClass "evdev touchpad catchall"
[ 9867.193] (**) Wacom Intuos Pro M Finger: Applying InputClass "evdev touchpad catchall"
[ 9867.193] (**) Wacom Intuos Pro M Finger: Applying InputClass "touchpad catchall"
[ 9867.193] (**) Wacom Intuos Pro M Finger: Applying InputClass "Default clickpad buttons"
[ 9867.193] (**) Wacom Intuos Pro M Finger: Applying InputClass "Wacom class"
[ 9867.193] (II) Using input driver 'wacom' for 'Wacom Intuos Pro M Finger'
[ 9867.193] (**) Wacom Intuos Pro M Finger: always reports core events
[ 9867.193] (**) Option "Device" "/dev/input/event23"
[ 9867.193] (EE) Wacom Intuos Pro M Finger: Invalid type 'stylus' for this device.
[ 9867.193] (EE) Wacom Intuos Pro M Finger: Invalid type 'eraser' for this device.
[ 9867.193] (EE) Wacom Intuos Pro M Finger: Invalid type 'cursor' for this device.
[ 9867.193] (II) Wacom Intuos Pro M Finger: type not specified, assuming 'touch'.
[ 9867.193] (II) Wacom Intuos Pro M Finger: other types will be automatically added.
[ 9867.193] (**) Option "Mode" "Absolute"
[ 9867.193] (**) Option "PressCurve" "5,0,100,95"
[ 9867.193] (**) Option "Threshold" "60"
[ 9867.193] (--) Wacom Intuos Pro M Finger touch: Wacom Unknown USB tablet maxX=4096 maxY=4096 maxZ=0 resX=18000 resY=29000
[ 9867.193] (II) Wacom Intuos Pro M Finger touch: hotplugging dependent devices.
[ 9867.193] (EE) Wacom Intuos Pro M Finger touch: Invalid type 'stylus' for this device.
[ 9867.193] (EE) Wacom Intuos Pro M Finger touch: Invalid type 'eraser' for this device.
[ 9867.193] (EE) Wacom Intuos Pro M Finger touch: Invalid type 'cursor' for this device.
[ 9867.193] (EE) Wacom Intuos Pro M Finger touch: Invalid type 'pad' for this device.
[ 9867.193] (II) Wacom Intuos Pro M Finger touch: hotplugging completed.
[ 9867.211] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input83/event23"
[ 9867.211] (II) XINPUT: Adding extended input device "Wacom Intuos Pro M Finger touch" (type: TOUCH, id 18)
[ 9867.211] (**) Wacom Intuos Pro M Finger touch: (accel) keeping acceleration scheme 1
[ 9867.211] (**) Wacom Intuos Pro M Finger touch: (accel) acceleration profile 0
[ 9867.211] (**) Wacom Intuos Pro M Finger touch: (accel) acceleration factor: 2.000
[ 9867.211] (**) Wacom Intuos Pro M Finger touch: (accel) acceleration threshold: 4
[ 9867.213] (II) config/udev: Adding input device Wacom Intuos Pro M Pen (/dev/input/mouse2)
[ 9867.213] (II) No input driver specified, ignoring this device.
[ 9867.213] (II) This device may have been added with another device file.
[ 9867.213] (II) config/udev: Adding input device Wacom Intuos Pro M Finger (/dev/input/mouse3)
[ 9867.213] (**) Wacom Intuos Pro M Finger: Ignoring device from InputClass "touchpad ignore duplicates"
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Finger touch: Error reading wacom device : No such device
[ 9890.630] (II) config/udev: removing device Wacom Intuos Pro M Finger touch
[ 9890.649] (II) UnloadModule: "wacom"
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
(EE) Wacom Intuos Pro M Pen pad: Error reading wacom device : No such device
[ 9890.652] (II) config/udev: removing device Wacom Intuos Pro M Pen stylus
[ 9890.653] (II) UnloadModule: "wacom"
[ 9890.653] (II) config/udev: removing device Wacom Intuos Pro M Pen eraser
[ 9890.654] (II) UnloadModule: "wacom"
[ 9890.654] (II) config/udev: removing device Wacom Intuos Pro M Pen cursor
[ 9890.656] (II) UnloadModule: "wacom"
[ 9890.656] (II) config/udev: removing device Wacom Intuos Pro M Pen pad
[ 9890.660] (II) UnloadModule: "wacom"
Code:
--> uname -r
3.11.10-21-desktop
--> xsetwacom --list devices
<nothing is in the reply>
--> dmesg | grep wacom
[ 9861.455044] usbcore: registered new interface driver wacom
[ 9884.939953] usbcore: deregistering interface driver wacom
--> lsusb | grep Wacom
Bus 003 Device 052: ID 056a:0315 Wacom Co., Ltd
--> rpm -qa | grep wacom
xf86-input-wacom-0.22.1-2.1.2.x86_64
libwacom-data-0.8-1.1.x86_64
libwacom2-0.8-1.1.x86_64
libwacom-tools-0.8-1.1.x86_64
here I am a bit lost.
it looks like device triggers needed actions, but when it comes to the Wacom drivers - the device is not recognized.
can you help?
Andrey