January 19, 2020, 10:58 am
I'm using leap 15.2 and KDE.
I'm trying to write a script to get a list of directories ( from the current directory, pwd).
Code:
for dir in *
do
echo "dir = $dir"
done
This gets me close but using * doesn't include directory info.
Is there a simple script to do this without parsing the whole output from a command like
?
Thank you.
↧
January 19, 2020, 11:34 am
Hi.
Has anyone seen something that would help me on this one?
I was using arch a wile ago, I got annoyed and came back to opensuse.
On main wile I started using Keepass to storage my passwords.
Back to opensuse I am using the same database so I do not need to put all the entries manualy, sweet.
The only thing is that the database (file where all the entries are stored) is deletable. In arch it was protected against deletion.
I started a new database to check on its behavior and the new database was also deletable.
It could be some settings on Keepass that I need to change.
What I tried to do was using chattr, but it did not work,
I will keep on trying to find the fixing. If I do I will post. Any help would be appreciated.
Thanks
↧
↧
January 19, 2020, 12:51 pm
Hallo,
hoffentlich bin ich hier nicht allzu verkehrt.
Weiß jemand, wo in einem Linuxsystem die Links auf irgendwelche Dateien aufgelistet sind?
Hintergrund meiner Frage: ich habe einen Linux-Satellitenreceiver (VU-Plus-Ultimo), bei dem ich die Aufnahmen in spezielle Ordner einsortiere. Das Gerät erzeugt aber immer zugleich einen Link auf solche Aufnahmen und erzeugt damit einen ständig zunehmenden Haufen von Links auf anderswo gelagerte Dateien. Diese Linksammlung würde ich gern hin und wider editieren.
VG
mgbd
↧
January 19, 2020, 7:22 pm
Hi guys,
I found the font and text size of the terminal in YaST installer of openSUSE Tumbleweed are satisfying on my 2560x1440 screen. Is it possible to copy the configuration of the terminal in YaST installer and use it for the boot screen and following text mode of openSUSE Tumbleweed? Does anyone know how to do it?
Thanks in advance.
↧
January 19, 2020, 8:35 pm
For the last few months I have been getting the following notification:
low disc space
Your Home folder is running out of disk space, you have 0 MiB remaining (0%.
when I check using dolphin it shows 20Kb free, and the computer slows to a crawl.
If I log out/log in dolphin shows 760 Gib free, and all is good for a few days after which the process repeats.
I have tried deleting files in the directory which shows as xfs mounted on /home from /dev/sdb5, but the problem re-occurs.
I have two drives mounted on home. Do I need to mount them elsewhere or is there some other problem / solution.
Thanks Laurie.
↧
↧
January 19, 2020, 11:51 pm
Since the new update of kernel-stable this weekend my ethernet connection through the USB docking station isn't working anymore. The network manager shows cable unplugged. Dmesg shows
Code:
[ 847.595005] usb 1-5: USB disconnect, device number 2
[ 847.595010] usb 1-5.1: USB disconnect, device number 5
[ 847.595014] usb 1-5.1.1: USB disconnect, device number 6
[ 847.595017] usb 1-5.1.1.1: USB disconnect, device number 7
[ 847.595020] usb 1-5.1.1.1.3: USB disconnect, device number 10
[ 847.595024] usb 1-5.1.1.1.3.4: USB disconnect, device number 11
[ 847.703688] usb 4-1: USB disconnect, device number 2
[ 847.703691] usb 4-1.1: USB disconnect, device number 3
[ 847.704327] usb 4-1.2: USB disconnect, device number 4
[ 847.737539] usb 1-5.1.1.2: USB disconnect, device number 8
[ 847.738007] usb 1-5.1.1.3: USB disconnect, device number 9
[ 847.772778] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.772787] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.772788] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.773101] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.773106] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.773107] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.773396] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.773401] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.773402] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.773737] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.773742] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.773743] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.774050] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.774055] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.774056] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.774815] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.774821] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.774823] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.775047] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.775051] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.775052] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.775308] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.775314] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.775315] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.775621] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.775625] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.775626] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 847.776134] usb 4-1.3: USB disconnect, device number 5
[ 847.776163] usb 4-1.3: Not enough bandwidth for new device state.
[ 847.776172] usb 4-1.3: Not enough bandwidth for altsetting 2
[ 847.776175] usb 4-1.3: 3:2: usb_set_interface failed (-28)
[ 852.511738] usb 1-5: new high-speed USB device number 12 using xhci_hcd
[ 852.536530] usb 1-5: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00
[ 852.536536] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 852.537378] hub 1-5:1.0: USB hub found
[ 852.537450] hub 1-5:1.0: 4 ports detected
[ 852.823738] usb 1-5.1: new high-speed USB device number 13 using xhci_hcd
[ 852.844749] usb 1-5.1: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00
[ 852.844755] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 852.845983] hub 1-5.1:1.0: USB hub found
[ 852.846221] hub 1-5.1:1.0: 4 ports detected
[ 853.139762] usb 1-5.1.1: new high-speed USB device number 14 using xhci_hcd
[ 853.161844] usb 1-5.1.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[ 853.161850] usb 1-5.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 853.161854] usb 1-5.1.1: Product: USB2.0 Hub
[ 853.163205] hub 1-5.1.1:1.0: USB hub found
[ 853.163564] hub 1-5.1.1:1.0: 4 ports detected
[ 853.451975] usb 1-5.1.1.1: new high-speed USB device number 15 using xhci_hcd
[ 853.475553] usb 1-5.1.1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=50.87
[ 853.475559] usb 1-5.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 853.475563] usb 1-5.1.1.1: Product: USB2.0 Hub
[ 853.475565] usb 1-5.1.1.1: Manufacturer: GenesysLogic
[ 853.477038] hub 1-5.1.1.1:1.0: USB hub found
[ 853.477358] hub 1-5.1.1.1:1.0: 3 ports detected
[ 853.559740] usb 1-5.1.1.2: new full-speed USB device number 16 using xhci_hcd
[ 853.584037] usb 4-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[ 853.604794] usb 4-1: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00
[ 853.604800] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 853.606689] hub 4-1:1.0: USB hub found
[ 853.606778] hub 4-1:1.0: 4 ports detected
[ 853.671283] usb 1-5.1.1.2: New USB device found, idVendor=03f0, idProduct=0867, bcdDevice= 0.00
[ 853.671289] usb 1-5.1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 853.671292] usb 1-5.1.1.2: Product: HP USB-C Universal Dock
[ 853.671295] usb 1-5.1.1.2: Manufacturer: HP
[ 853.671298] usb 1-5.1.1.2: SerialNumber: 11AD1D0A9730481209150B00
[ 853.759748] usb 1-5.1.1.3: new high-speed USB device number 17 using xhci_hcd
[ 853.784841] usb 1-5.1.1.3: New USB device found, idVendor=0ea0, idProduct=2272, bcdDevice= 1.00
[ 853.784847] usb 1-5.1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 853.784850] usb 1-5.1.1.3: Product: Pen Drive
[ 853.784853] usb 1-5.1.1.3: Manufacturer:
[ 853.784856] usb 1-5.1.1.3: SerialNumber: F01D5AA63F6300B0
[ 853.787033] usb-storage 1-5.1.1.3:1.0: USB Mass Storage device detected
[ 853.787534] scsi host0: usb-storage 1-5.1.1.3:1.0
[ 853.883768] usb 1-5.1.1.1.3: new high-speed USB device number 18 using xhci_hcd
[ 853.896048] usb 4-1.1: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[ 853.914973] usb 1-5.1.1.1.3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
[ 853.914978] usb 1-5.1.1.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=12
[ 853.914982] usb 1-5.1.1.1.3: SerialNumber: 0000001871
[ 853.916679] hub 1-5.1.1.1.3:1.0: USB hub found
[ 853.917085] hub 1-5.1.1.1.3:1.0: 4 ports detected
[ 853.920926] usb 4-1.1: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00
[ 853.920932] usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 853.923777] hub 4-1.1:1.0: USB hub found
[ 853.923913] hub 4-1.1:1.0: 4 ports detected
[ 854.012040] usb 4-1.2: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[ 854.038747] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.01
[ 854.038753] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 854.038757] usb 4-1.2: Product: USB 10/100/1000 LAN
[ 854.038760] usb 4-1.2: Manufacturer: Realtek
[ 854.038762] usb 4-1.2: SerialNumber: 000001000000
[ 854.140523] usb 4-1.2: reset SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[ 854.194029] r8152 4-1.2:1.0 eth1: v1.10.10
[ 854.208030] usb 1-5.1.1.1.3.4: new full-speed USB device number 19 using xhci_hcd
lsusb shows
Code:
Bus 004 Device 009: ID 17e9:600a DisplayLink
Bus 004 Device 008: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 004 Device 007: ID 04b4:6504 Cypress Semiconductor Corp.
Bus 004 Device 006: ID 04b4:6504 Cypress Semiconductor Corp.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b669 Chicony Electronics Co., Ltd
Bus 001 Device 017: ID 0ea0:2272 Ours Technology, Inc.
Bus 001 Device 016: ID 03f0:0867 Hewlett-Packard
Bus 001 Device 019: ID 03f0:0c47 Hewlett-Packard
Bus 001 Device 018: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 015: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 014: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 013: ID 04b4:6506 Cypress Semiconductor Corp.
Bus 001 Device 012: ID 04b4:6506 Cypress Semiconductor Corp.
Bus 001 Device 004: ID 8087:0029 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Any ideas? kernel version is now
Code:
Linux linux-wlad 5.4.13-1.g5cf5394-default #1 SMP Sat Jan 18 09:42:02 UTC 2020 (5cf5394) x86_64 x86_64 x86_64 GNU/Linux
↧
January 19, 2020, 11:56 pm
I hope i'm doing this right, if any additional information is need, i´d be happy to provide it.
I have a miix320 netbook with a detachable screen that i'd like to auto-rotate. I know that i need kded-rotate for that which is not in the repos so i have to build it myself from git. Among the dependencies there is a package libqt5-qtsensors which i should be able to obtain from openSUSE:Factory. But i can neither install via website nor manually (Factory.repo not found).
I don't want to make a mess by building libqt5-sensors from source. Can anyone help me to install kded-rotation, please? I'm used to Arch & Void so i'm surely missing something here. Thanks!
↧
January 20, 2020, 1:16 am
Hi Everyone.
I have recently moved to Leap 15.1 with xfce.
One issue I have is that file managers do not automatically refresh when changes happen.
For example, add a file to a directory, delete the file (outside of the file manager), but the original directory still contains a file like originally.
I have tried deleting the .cache directory and rebooting to no avail.
Also, if I use thunar specifically, navigate to a directory, and then delete the directory from the outside (e.g., using command line), attempt to refresh thunar manually (by pressing Ctrl+R) results in it crashing.
Any ideas?
↧
January 20, 2020, 1:51 am
Hi Everyone.
I have recently moved to Leap 15.1 with xfce.
There have been various issues including Dropbox acting wonky.
Basically, I install Dropbox from the package manager and all seems fine.
It starts synching (it says), but does not give any kinds of progress reports either through GUI or when running dropbox status from the command line.
When I run dropbox status it just says that it is synching, but not how many files left etc.
At this point Dropbox had been saying this for a few days.
Yes, I do have lots of stuff there, but I do not know if it is actually synching or is hung.
I previously tried uninstalling Dropbox and reinstalling, but eventually hit the same issue.
Anyone can shed some light on this?
↧
↧
January 20, 2020, 3:52 am
Hello,
When I start Yast2 on the command line :: /sbin/yast2
I get this ::
frik@localhost:~> /sbin/yast2
Run command: /sbin/yast2 inst_release_notes &
terminate called after throwing an instance of 'YUIPluginException'
what(): Couldn't load plug-in qt
/sbin/yast2: line 468: 4985 Aborted (core dumped) $ybindir/y2start $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
This was after a update about an hour ago ??
↧
January 20, 2020, 5:04 am
Hallo,
seit kurzem druckt Okular nicht mehr. Es scheint die Datei verschickt zu werden (Kernel-Anzeige) aber die Drucker-Warteschlange bleibt leer; weshalb der Drucker natürlich nicht reagiert. Druck über anderen Treiber (LibreOffice) ist einwandfrei.
System: intel 4570 / 8GB-RAM / Plasma KDE
Für Hinweise wäre ich dankbar
↧
January 20, 2020, 5:26 am
calibre-3.40.1-lp151.1.1.x86_64 requires libicu >= 4.4, but this requirement cannot be provided
sudo zypper info libicu
Loading repository data...
Reading installed packages...
package 'libicu' not found.
sudo zypper install libicu
Loading repository data...
Reading installed packages...
'libicu' not found in package names. Trying capabilities.
'libicu60_2' providing 'libicu' is already installed.
Resolving package dependencies...
Nothing to do.
sudo zypper info libicu60_2
Loading repository data...
Reading installed packages...
Information for package libicu60_2:
-----------------------------------
Repository : Main Update Repository
Name : libicu60_2
Version : 60.2-lp151.3.3.1
Arch : x86_64
Vendor : openSUSE
Installed Size : 4.8 MiB
Installed : Yes
Status : out-of-date (version 60.2-lp151.2.4 installed)
Source package : icu-60.2-lp151.3.3.1.src
Summary : International Components for Unicode
Description :
ICU is a set of C and C++ libraries that provide extensive Unicode
and locale support.
This package contains the runtime libraries for ICU.
↧
January 20, 2020, 9:36 am
Does anyone know the location of the icon Solaar uses? The one I have shown on the panel is black.
↧
↧
January 20, 2020, 10:20 am
Good morning/evening/night guys,
since I installed the latest Tumbleweed updates yesterday (many many packages were upgraded, including Firefox), fullscreen videos played in Firefox have got low fps and constantly lag. This happens at least on Youtube and Vimeo. No problems when playing videos inside the webpage (no fullscreen mode). This happens even when viewing in very low resolution (360p and higher resolutions). 240p is as smooth as it should be, even in fullscreen. This doesn't happen in Chrome.
I'm using Wayland, haven't tried with Xorg yet. I'll try and keep you updated.
What can I do to grab more data on the problem?
Thanks :)
↧
January 20, 2020, 2:16 pm
I am running 15.1, KMail 5.10.3. An annoying "feature" is that when I move a message from the Inbox to one of my other folders, the move is successful, and the message title disappears from the Inbox listing, but.....then within seconds the listing and the message return to the Inbox. Sometimes it's just the message title, most times it is the whole message. If I delete the message it is definitely gone. As I said, annoying, but not fatal. However, I would like to get rid of these occurrences, so I don't have to first move, then delete. This has never occurred before in years of using KMail. Any suggestions on a solution would be appreciated!
↧
January 20, 2020, 2:34 pm
I have tried to install Skype, Chrome and Teamviewer. For each of these as soon as I press the 'install' button and complete the authentication dialogue a message 'Internal error' appears.
The installs I have used are the Skype rpm download from the Microsoft website, the Opensuse Chrome from the Google website and the OpenSuse Teamviewer from the Teamviewer website.
What does 'Internal error' mean? Is it an OpenSuse error, a Discover error or an error in the downloaded package?
More importantly, what do I need to do rectify the situation?
A word of explanation : I have been using Windows 7 which is now 'deprecated' by Microsoft. I would prefer not to use Windows 10 so I'm looking for an alternative such as Linux for my main machine. In this context Skype and Teamviewer are essential for me.
↧
January 21, 2020, 2:19 am
↧
↧
January 21, 2020, 3:31 am
Hello, I know this is probably firefox specific question, but maybe someone knows.
Why does firefox on leap 15.1 with openbox show downloads in a tab, which is actually my preferred behavior I'm trying to achieve
![]()
but on my tumbleweed machine with kde firefox shows downloads in extra window like this
![]()
I have no idea what config parameter could switch this behavior :( Extra window seems to be default on windows too, but I don't like it. Thank you.
↧
January 21, 2020, 11:03 am
↧
January 21, 2020, 10:22 pm
Hallo,
gibt es eine Möglichkeit eine Partition wiederherzustellen, auch wenn man kein Festplattenexperte ist?
Ich habe vor Jahren mal Testdisk versucht, kam damit aber nicht zurecht.
Gruß
↧
