Quantcast
Channel: openSUSE Forums
Viewing all 40713 articles
Browse latest View live
↧

TUMBLEWEED Unable to connect to Apple Display via Thunderbolt

July 10, 2018, 5:15 am
$
0
0
Hi,

I am running TW on a Lenovo W541 laptop with a Displayport connector. I have tried connecting to an external Apple display ( actually I think there are two of them, daisy-chained ), but the display is not recognized.

xrandr only shows one connected output:

Code:
$ xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
XWAYLAND0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
  1920x1080    60.05*+
lscpi does show the TB controller, and some devices I guess

Code:
$ sudo lspci | grep -i thunder
06:00.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
07:00.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
07:03.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
07:04.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
07:05.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
07:06.0 PCI bridge: Intel Corporation DSL4410 Thunderbolt Bridge [Redwood Ridge 2C 2013]
08:00.0 System peripheral: Intel Corporation DSL4410 Thunderbolt NHI [Redwood Ridge 2C 2013]
There are some less than encouraging messages in the kernel log when plugging in the TB connector:

Code:
[35109.751133] pci 0000:06:00.0: [8086:1567] type 01 class 0x060400
[35109.751312] pci 0000:06:00.0: enabling Extended Tags
[35109.751487] pci 0000:06:00.0: supports D1 D2
[35109.751488] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.763191] pci 0000:07:00.0: [8086:1567] type 01 class 0x060400
[35109.763362] pci 0000:07:00.0: enabling Extended Tags
[35109.763577] pci 0000:07:00.0: supports D1 D2
[35109.763579] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.763796] pci 0000:07:03.0: [8086:1567] type 01 class 0x060400
[35109.763895] pci 0000:07:03.0: enabling Extended Tags
[35109.764059] pci 0000:07:03.0: supports D1 D2
[35109.764061] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.764296] pci 0000:07:04.0: [8086:1567] type 01 class 0x060400
[35109.764476] pci 0000:07:04.0: enabling Extended Tags
[35109.764632] pci 0000:07:04.0: supports D1 D2
[35109.764633] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.764771] pci 0000:07:05.0: [8086:1567] type 01 class 0x060400
[35109.764919] pci 0000:07:05.0: enabling Extended Tags
[35109.765089] pci 0000:07:05.0: supports D1 D2
[35109.765090] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.765262] pci 0000:07:06.0: [8086:1567] type 01 class 0x060400
[35109.765374] pci 0000:07:06.0: enabling Extended Tags
[35109.765487] pci 0000:07:06.0: supports D1 D2
[35109.765489] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.765739] pci 0000:06:00.0: PCI bridge to [bus 07-3f]
[35109.765769] pci 0000:06:00.0:  bridge window [mem 0xb8000000-0xce0fffff]
[35109.765787] pci 0000:06:00.0:  bridge window [mem 0xd0000000-0xf1ffffff 64bit pref]
[35109.765946] pci 0000:08:00.0: [8086:1566] type 00 class 0x088000
[35109.766030] pci 0000:08:00.0: reg 0x10: [mem 0xce000000-0xce03ffff]
[35109.766062] pci 0000:08:00.0: reg 0x14: [mem 0xce040000-0xce040fff]
[35109.766246] pci 0000:08:00.0: enabling Extended Tags
[35109.766438] pci 0000:08:00.0: supports D1 D2
[35109.766441] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[35109.775007] pci 0000:07:00.0: PCI bridge to [bus 08]
[35109.775047] pci 0000:07:00.0:  bridge window [mem 0xce000000-0xce0fffff]
[35109.775214] pci 0000:07:03.0: PCI bridge to [bus 09-34]
[35109.775237] pci 0000:07:03.0:  bridge window [mem 0xb8000000-0xc5ffffff]
[35109.775254] pci 0000:07:03.0:  bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
[35109.775353] pci 0000:07:04.0: PCI bridge to [bus 35-3d]
[35109.775378] pci 0000:07:04.0:  bridge window [mem 0xc6000000-0xcdffffff]
[35109.775395] pci 0000:07:04.0:  bridge window [mem 0xea000000-0xf1ffffff 64bit pref]
[35109.775487] pci 0000:07:05.0: PCI bridge to [bus 3e]
[35109.775601] pci 0000:07:06.0: PCI bridge to [bus 3f]
[35109.775717] pci_bus 0000:07: Allocating resources
[35109.775794] pci 0000:07:00.0: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[35109.775796] pci 0000:07:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[35109.775821] pci 0000:07:03.0: bridge window [io  0x1000-0x0fff] to [bus 09-34] add_size 1000
[35109.775846] pci 0000:07:04.0: bridge window [io  0x1000-0x0fff] to [bus 35-3d] add_size 1000
[35109.775871] pci 0000:07:05.0: bridge window [io  0x1000-0x0fff] to [bus 3e] add_size 1000
[35109.775873] pci 0000:07:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3e] add_size 200000 add_align 100000
[35109.775874] pci 0000:07:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3e] add_size 200000 add_align 100000
[35109.775899] pci 0000:07:06.0: bridge window [io  0x1000-0x0fff] to [bus 3f] add_size 1000
[35109.775900] pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3f] add_size 200000 add_align 100000
[35109.775901] pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3f] add_size 200000 add_align 100000
[35109.775926] pci 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07-3f] add_size 5000
[35109.775929] pci 0000:06:00.0: BAR 13: no space for [io  size 0x5000]
[35109.775930] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x5000]
[35109.775932] pci 0000:06:00.0: BAR 13: no space for [io  size 0x5000]
[35109.775932] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x5000]
[35109.775938] pci 0000:07:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775939] pci 0000:07:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775940] pci 0000:07:05.0: BAR 14: no space for [mem size 0x00200000]
[35109.775940] pci 0000:07:05.0: BAR 14: failed to assign [mem size 0x00200000]
[35109.775942] pci 0000:07:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775943] pci 0000:07:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775944] pci 0000:07:06.0: BAR 14: no space for [mem size 0x00200000]
[35109.775945] pci 0000:07:06.0: BAR 14: failed to assign [mem size 0x00200000]
[35109.775946] pci 0000:07:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775947] pci 0000:07:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775948] pci 0000:07:00.0: BAR 13: no space for [io  size 0x1000]
[35109.775948] pci 0000:07:00.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775949] pci 0000:07:03.0: BAR 13: no space for [io  size 0x1000]
[35109.775950] pci 0000:07:03.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775951] pci 0000:07:04.0: BAR 13: no space for [io  size 0x1000]
[35109.775952] pci 0000:07:04.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775953] pci 0000:07:05.0: BAR 13: no space for [io  size 0x1000]
[35109.775954] pci 0000:07:05.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775954] pci 0000:07:06.0: BAR 13: no space for [io  size 0x1000]
[35109.775955] pci 0000:07:06.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775957] pci 0000:07:06.0: BAR 14: no space for [mem size 0x00200000]
[35109.775958] pci 0000:07:06.0: BAR 14: failed to assign [mem size 0x00200000]
[35109.775959] pci 0000:07:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775960] pci 0000:07:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775961] pci 0000:07:06.0: BAR 13: no space for [io  size 0x1000]
[35109.775962] pci 0000:07:06.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775963] pci 0000:07:05.0: BAR 14: no space for [mem size 0x00200000]
[35109.775964] pci 0000:07:05.0: BAR 14: failed to assign [mem size 0x00200000]
[35109.775965] pci 0000:07:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775966] pci 0000:07:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775967] pci 0000:07:05.0: BAR 13: no space for [io  size 0x1000]
[35109.775967] pci 0000:07:05.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775968] pci 0000:07:04.0: BAR 13: no space for [io  size 0x1000]
[35109.775969] pci 0000:07:04.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775970] pci 0000:07:03.0: BAR 13: no space for [io  size 0x1000]
[35109.775971] pci 0000:07:03.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775972] pci 0000:07:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[35109.775973] pci 0000:07:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[35109.775974] pci 0000:07:00.0: BAR 13: no space for [io  size 0x1000]
[35109.775975] pci 0000:07:00.0: BAR 13: failed to assign [io  size 0x1000]
[35109.775976] pci 0000:07:00.0: PCI bridge to [bus 08]
[35109.775989] pci 0000:07:00.0:  bridge window [mem 0xce000000-0xce0fffff]
[35109.776014] pci 0000:07:03.0: PCI bridge to [bus 09-34]
[35109.776027] pci 0000:07:03.0:  bridge window [mem 0xb8000000-0xc5ffffff]
[35109.776036] pci 0000:07:03.0:  bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
[35109.776053] pci 0000:07:04.0: PCI bridge to [bus 35-3d]
[35109.776066] pci 0000:07:04.0:  bridge window [mem 0xc6000000-0xcdffffff]
[35109.776075] pci 0000:07:04.0:  bridge window [mem 0xea000000-0xf1ffffff 64bit pref]
[35109.776092] pci 0000:07:05.0: PCI bridge to [bus 3e]
[35109.776129] pci 0000:07:06.0: PCI bridge to [bus 3f]
[35109.776166] pci 0000:06:00.0: PCI bridge to [bus 07-3f]
[35109.776179] pci 0000:06:00.0:  bridge window [mem 0xb8000000-0xce0fffff]
[35109.776188] pci 0000:06:00.0:  bridge window [mem 0xd0000000-0xf1ffffff 64bit pref]
Any ideas on how to troubleshoot/fix would be very much appreciated.

Thanks!

Robert
↧
Search

32bit package excluded even though baselibs.conf is in place

July 10, 2018, 5:40 am
$
0
0
I added baselibs.conf containing the package Name and added i586 Flag to the Repo, but still the 32bit package is not built in home:fschuett for package udev0 and leap 15.0.
What am I missing here?
Thanks for any help.
↧
↧

LEAP 15 How to turn off monitor after some time?

July 10, 2018, 5:45 am
$
0
0
Before i have a home server with opensuse 42.3 console mode. It automatically turn off monitor after some time. Now, when i fresh install new transactional opensuse 15, my monitor always on. Where i can configure this parameter?
↧

LEAP 15 AutoYast and extended partition

July 10, 2018, 7:09 am
$
0
0
Hello,

I have the following autoinst.xml
Code:
<?xml version="1.0"?>
<!DOCTYPE profile>
<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns">
  <add-on>
    <add_on_products config:type="list"/>
  </add-on>
  <bootloader>
    <global>
      <append>resume=/dev/disk/by-id/ata-Micron_M550_2.5__7mm_256GB_14220C34F020-part5 splash=silent quiet showopts</append>
      <gfxmode>auto</gfxmode>
      <hiddenmenu>false</hiddenmenu>
      <os_prober>true</os_prober>
      <terminal>gfxterm</terminal>
      <timeout config:type="integer">8</timeout>
      <trusted_grub>false</trusted_grub>
      <xen_kernel_append>vga=gfx-1024x768x16</xen_kernel_append>
    </global>
    <loader_type>grub2</loader_type>
  </bootloader>
  <deploy_image>
    <image_installation config:type="boolean">false</image_installation>
  </deploy_image>
  <general>
    <ask-list config:type="list"/>
    <mode>
      <confirm config:type="boolean">false</confirm>
    </mode>
    <proposals config:type="list"/>
    <signature-handling>
      <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum>
      <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key>
      <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key>
      <accept_unsigned_file config:type="boolean">true</accept_unsigned_file>
      <accept_verification_failed config:type="boolean">false</accept_verification_failed>
      <import_gpg_key config:type="boolean">true</import_gpg_key>
    </signature-handling>
    <storage>
      <start_multipath config:type="boolean">false</start_multipath>
    </storage>
  </general>
  <groups config:type="list">
    <group>
      <encrypted config:type="boolean">true</encrypted>
      <gid>100</gid>
      <group_password>x</group_password>
      <groupname>users</groupname>
      <userlist/>
    </group>
...
    <group>
      <encrypted config:type="boolean">true</encrypted>
      <gid>475</gid>
      <group_password>x</group_password>
      <groupname>sshd</groupname>
      <userlist/>
    </group>
  </groups>
  <host>
    <hosts config:type="list">
      <hosts_entry>
        <host_address>127.0.0.1</host_address>
        <names config:type="list">
          <name>localhost</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>::1</host_address>
        <names config:type="list">
          <name>localhost ipv6-localhost ipv6-loopback</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>fe00::0</host_address>
        <names config:type="list">
          <name>ipv6-localnet</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>ff00::0</host_address>
        <names config:type="list">
          <name>ipv6-mcastprefix</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>ff02::1</host_address>
        <names config:type="list">
          <name>ipv6-allnodes</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>ff02::2</host_address>
        <names config:type="list">
          <name>ipv6-allrouters</name>
        </names>
      </hosts_entry>
      <hosts_entry>
        <host_address>ff02::3</host_address>
        <names config:type="list">
          <name>ipv6-allhosts</name>
        </names>
      </hosts_entry>
    </hosts>
  </host>
  <keyboard>
    <keymap>french</keymap>
  </keyboard>
  <language>
    <language>fr_FR</language>
    <languages/>
  </language>
  <login_settings/>
  <networking>
    <dhcp_options>
      <dhclient_client_id/>
      <dhclient_hostname_option>AUTO</dhclient_hostname_option>
    </dhcp_options>
    <dns>
      <dhcp_hostname config:type="boolean">true</dhcp_hostname>
      <domain>insa-lyon.fr</domain>
      <hostname>lamcospo187</hostname>
      <resolv_conf_policy>auto</resolv_conf_policy>
      <write_hostname config:type="boolean">false</write_hostname>
    </dns>
    <interfaces config:type="list">
      <interface>
        <bootproto>dhcp</bootproto>
        <device>em1</device>
        <startmode>auto</startmode>
        <zone>public</zone>
      </interface>
      <interface>
        <bootproto>static</bootproto>
        <device>lo</device>
        <firewall>no</firewall>
        <ipaddr>127.0.0.1</ipaddr>
        <netmask>255.0.0.0</netmask>
        <network>127.0.0.0</network>
        <prefixlen>8</prefixlen>
        <startmode>nfsroot</startmode>
        <usercontrol>no</usercontrol>
      </interface>
    </interfaces>
    <ipv6 config:type="boolean">true</ipv6>
    <keep_install_network config:type="boolean">true</keep_install_network>
    <managed config:type="boolean">false</managed>
    <net-udev config:type="list">
      <rule>
        <name>em1</name>
        <rule>ATTR{address}</rule>
        <value>f8:b1:56:dd:76:40</value>
      </rule>
    </net-udev>
    <routing>
      <ipv4_forward config:type="boolean">false</ipv4_forward>
      <ipv6_forward config:type="boolean">false</ipv6_forward>
    </routing>
  </networking>
  <nis>
    <netconfig_policy>auto</netconfig_policy>
    <nis_broadcast config:type="boolean">false</nis_broadcast>
    <nis_broken_server config:type="boolean">false</nis_broken_server>
    <nis_domain/>
    <nis_local_only config:type="boolean">false</nis_local_only>
  </nis>
  <partitioning config:type="list">
    <drive>
      <device>/dev/sda</device>
      <disklabel>msdos</disklabel>
      <enable_snapshots config:type="boolean">false</enable_snapshots>
      <initialize config:type="boolean">true</initialize>
      <partitions config:type="list">
        <partition>
          <create config:type="boolean">true</create>
          <filesystem config:type="symbol">ext4</filesystem>
          <format config:type="boolean">true</format>
          <fstopt>data=ordered,acl,user_xattr</fstopt>
          <mount>/boot</mount>
          <mountby config:type="symbol">uuid</mountby>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">1</partition_nr>
          <partition_type>primary</partition_type>
          <resize config:type="boolean">false</resize>
          <size>500M</size>
        </partition>
        <partition>
          <create config:type="boolean">true</create>
          <filesystem config:type="symbol">swap</filesystem>
          <format config:type="boolean">true</format>
          <mount>swap</mount>
          <mountby config:type="symbol">uuid</mountby>
          <partition_id config:type="integer">130</partition_id>
          <partition_nr config:type="integer">5</partition_nr>
          <resize config:type="boolean">false</resize>
          <size>8G</size>
        </partition>
        <partition>
          <create config:type="boolean">true</create>
          <filesystem config:type="symbol">ext4</filesystem>
          <format config:type="boolean">true</format>
          <fstopt>acl,user_xattr</fstopt>
          <mount>/</mount>
          <mountby config:type="symbol">uuid</mountby>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">6</partition_nr>
          <resize config:type="boolean">false</resize>
          <size>150G</size>
        </partition>
        <partition>
          <create config:type="boolean">true</create>
          <filesystem config:type="symbol">ext4</filesystem>
          <format config:type="boolean">true</format>
          <fstopt>acl,user_xattr</fstopt>
          <mount>/machines_virtuelles</mount>
          <mountby config:type="symbol">uuid</mountby>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">7</partition_nr>
          <resize config:type="boolean">false</resize>
          <size>100G</size>
        </partition>
      </partitions>
      <type config:type="symbol">CT_DISK</type>
      <use>all</use>
    </drive>
  </partitioning>
  <proxy>
    <enabled config:type="boolean">false</enabled>
    <ftp_proxy/>
    <http_proxy/>
    <https_proxy/>
    <no_proxy>localhost, 127.0.0.1</no_proxy>
    <proxy_password/>
    <proxy_user/>
  </proxy>
  <report>
    <errors>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </errors>
    <messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </messages>
    <warnings>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </warnings>
    <yesno_messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </yesno_messages>
  </report>
  <services-manager>
    <default_target>graphical</default_target>
    <services>
      <disable config:type="list"/>
      <enable config:type="list">
        <service>apparmor</service>
        <service>auditd</service>
        <service>avahi-daemon</service>
        <service>ca-certificates</service>
        <service>chronyd</service>
        <service>cron</service>
        <service>cups</service>
        <service>display-manager</service>
        <service>firewalld</service>
        <service>haveged</service>
        <service>irqbalance</service>
        <service>iscsi</service>
        <service>kbdsettings</service>
        <service>lvm2-monitor</service>
        <service>mcelog</service>
        <service>ModemManager</service>
        <service>nscd</service>
        <service>postfix</service>
        <service>purge-kernels</service>
        <service>smartd</service>
        <service>sshd</service>
        <service>systemd-fsck-root</service>
        <service>wicked</service>
        <service>wickedd-auto4</service>
        <service>wickedd-dhcp4</service>
        <service>wickedd-dhcp6</service>
        <service>wickedd-nanny</service>
        <service>YaST2-Firstboot</service>
        <service>YaST2-Second-Stage</service>
        <service>getty@tty1</service>
      </enable>
    </services>
  </services-manager>
  <software>
    <image/>
    <install_recommended config:type="boolean">true</install_recommended>
    <instsource/>
    <packages config:type="list">
      <package>openssh</package>
      <package>openSUSE-release</package>
      <package>numactl</package>
      <package>kexec-tools</package>
      <package>irqbalance</package>
      <package>grub2</package>
      <package>glibc</package>
      <package>firewalld</package>
      <package>e2fsprogs</package>
      <package>chrony</package>
      <package>biosdevname</package>
      <package>autoyast2</package>
    </packages>
    <patterns config:type="list">
      <pattern>apparmor</pattern>
      <pattern>apparmor_opt</pattern>
      <pattern>base</pattern>
      <pattern>basesystem</pattern>
      <pattern>devel_C_C++</pattern>
      <pattern>devel_basis</pattern>
      <pattern>devel_java</pattern>
      <pattern>devel_python3</pattern>
      <pattern>devel_qt5</pattern>
      <pattern>devel_tcl</pattern>
      <pattern>enhanced_base</pattern>
      <pattern>enhanced_base_opt</pattern>
      <pattern>fonts</pattern>
      <pattern>fonts_opt</pattern>
      <pattern>imaging</pattern>
      <pattern>imaging_opt</pattern>
      <pattern>minimal_base</pattern>
      <pattern>multimedia</pattern>
      <pattern>multimedia_opt</pattern>
      <pattern>sw_management</pattern>
      <pattern>x11</pattern>
      <pattern>x11_enhanced</pattern>
      <pattern>x11_opt</pattern>
      <pattern>x11_yast</pattern>
      <pattern>xfce</pattern>
      <pattern>xfce_basis</pattern>
      <pattern>xfce_office</pattern>
      <pattern>yast2_basis</pattern>
    </patterns>
    <products config:type="list">
      <product>openSUSE</product>
    </products>
  </software>
  <ssh_import>
    <copy_config config:type="boolean">false</copy_config>
    <import config:type="boolean">false</import>
  </ssh_import>
  <timezone>
    <hwclock>UTC</hwclock>
    <timezone>Europe/Paris</timezone>
  </timezone>
  <user_defaults>
    <expire/>
    <group>100</group>
    <groups/>
    <home>/home</home>
    <inactive>-1</inactive>
    <no_groups config:type="boolean">true</no_groups>
    <shell>/bin/bash</shell>
    <skel>/etc/skel</skel>
    <umask>022</umask>
  </user_defaults>
  <users config:type="list">
    <user>
      <encrypted config:type="boolean">true</encrypted>
      <fullname>systemd Core Dumper</fullname>
      <gid>483</gid>
      <home>/</home>
      <password_settings>
        <expire/>
        <flag/>
        <inact/>
        <max/>
        <min/>
        <warn/>
      </password_settings>
      <shell>/sbin/nologin</shell>
      <uid>483</uid>
      <user_password>!!</user_password>
      <username>systemd-coredump</username>
    </user>
...
    <user>
      <encrypted config:type="boolean">true</encrypted>
      <fullname>systemd Network Management</fullname>
      <gid>482</gid>
      <home>/</home>
      <password_settings>
        <expire/>
        <flag/>
        <inact/>
        <max/>
        <min/>
        <warn/>
      </password_settings>
      <shell>/sbin/nologin</shell>
      <uid>482</uid>
      <user_password>!!</user_password>
      <username>systemd-network</username>
    </user>
  </users>
</profile>
No error message during the automatic installation.
Computer rebbot.
Login with root.

Code:
mateis502-pc207:~ # df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
devtmpfs          1,9G      0  1,9G  0% /dev
tmpfs              1,9G      0  1,9G  0% /dev/shm
tmpfs              1,9G    18M  1,9G  1% /run
tmpfs              1,9G      0  1,9G  0% /sys/fs/cgroup
/dev/sda3          147G    5,2G  134G  4% /
/dev/sda4          79G    57M  75G  1% /machines_virtuelles
/dev/sda1          477M    39M  409M  9% /boot
tmpfs              383M    4,0K  383M  1% /run/user/466
tmpfs              383M      0  383M  0% /run/user/0
Code:
mateis502-pc207:~ # fdisk -l
Disque /dev/sda : 238,5 GiB, 256060514304 octets, 500118192 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x3de2af75


Périphérique Amorçage    Début      Fin  Secteurs Taille Id Type
/dev/sda1                  2048  1026047  1024000  500M 83 Linux
/dev/sda2              1026048  17803263  16777216    8G 82 partition d'échange Linux / Solaris
/dev/sda3              17803264 332376063 314572800  150G 83 Linux
/dev/sda4    *        332376064 500118191 167742128    80G 83 Linux

Why I don't have an extended partition ?
↧

LEAP 15 Latest version of firefox (61)

July 10, 2018, 10:15 am
$
0
0
Hello,

I've got a question. I use Leap 15.0 and I want to use the most recent version of Firefox (61), because I want some functions that Firefox 60 ESR doesn't have. Now my question is: how can I add the firefox respository in leap 15? According to https://en.opensuse.org/Firefox that is possible.

I Thank you for your answer!
↧
↧

TUMBLEWEED How to install with existing /home on a separate volume

July 10, 2018, 10:57 am
$
0
0
Scenario: SSD for OS with separate RAID HDD for /home. Erase & re-make all partitions on SSD. Keep existing /home

How to install OpenSuse with an existing /home on a separate volume? I am able to configure the partitions on the SSD as I want them. However, the installer then wants to create a list of Btrfs subvolumes - including one for /home. There does not seem to be a way to instruct the installer to not do this and use the existing /home parition on the other volume.
↧

LEAP 42.3 TCP throughput limited after upgrading kernel

July 10, 2018, 11:04 am
$
0
0
Hello fellow users.

I use my laptop for network testing and after upgrading from 4.4.132-53 to 4.4.138-59 the tcp throughput dropped like a stone. As I can boot on either kernel, the tests are easily repeated, always with the same result.

I am running iperf3 between the laptop and some server at 33ms "RTT distance". With 4.4.132, a single tcp stream (server to laptop) peaks at 719 Mbps, as opposed to 4.4.138 were the download barely reaches 38 Mbps. After capturing some packets, I found the tcp window reaching a max of 185 KB (4.4.138) or 3145 KB (4.4.132). What I can not understand is why. Tried to compare sysctl -a outputs, checked /proc/sys/net/... and every value is identical between kernel versions.

Any pointers to the problem or where to seach for an explanation and/or a fix? Thank you.
↧

LEAP 15 Shutdown if GUI Power switches won’t work

July 10, 2018, 11:23 am
$
0
0
Is there a way to do a ‘shutdown now’ command if the power switche(s) in the panel won’t work?

And if so, will it start again with the GUI or the something else?
↧
Search

LEAP 15 How to change refresh rate on gdm login screen?

July 10, 2018, 11:38 am
$
0
0
Since kernel 4.14 my laptop screen refresh rate is not detected correctly and I have to change it manually.(Funny, Leap 15 is on 4.12 and has this bug too) It doesn't matter on which distro. On KDE it's simple and affect login screen. But not on Gnome.
My screen behave normal on 59.93 or 59.96 but every time I install new distro it is set to 60.1.
I can change it in gnome settings but it only affects desktop, not the login screen...
So, how to set it globally?
↧
↧

LEAP 15 bumblebee for nvidia - SDB article

July 10, 2018, 2:45 pm
$
0
0
In the SDB for installing bumblebee, there is a section specific for Leap 15 near the bottom.
https://en.opensuse.org/SDB:NVIDIA_Bumblebee

There a lot of symlinks to be added to two different added libraries.
Can those be done as a 'gang' copy and paste, or need to be individual?

I want to make sure I have enough time to do it before the hybrid intel/nvidia cause the power down/reboot to not work again.

PS> if I could get to it easily, I would remove the nvidia card from my laptop, but not easy, and no BIOS disable.
↧

OTHER VERSION PC still booting on GNU GRUB even after boot-repair

July 10, 2018, 4:32 pm
$
0
0
I have an issue on my Asus. After I runned boot-repair on USB live, after rebooting the same message of Grub GNU 2.0 appears "minimal bash like-line editing is supported..."
I don't know what to do,
Here is the link http://paste.ubuntu.com/p/D9JQcvy33S/
The message says "Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/shimx64.efi file!", but I don't know how to do that.

Thank you,
↧

TUMBLEWEED Disable touch screen driver.

July 10, 2018, 10:41 pm
$
0
0
Disable touch screen driver.
I need to uninstall this driver because my touch screen has a problem, it has broken the screen and begins to detect touches, I use Opensuse tumbleweed in laptop DELL 2-in-1 Inspiron 15 series 5000.
How do I disable and / or uninstall them?
thanks for your help:'(


Necesito desinstalar este controlador pues mi pantalla tactil tiene un problema, se ha roto la pantalla y comienza a detectar toques, utilizo Opensuse tumbleweed en laptop DELL 2-in-1 Inspiron 15 serie 5000.
¿Cómo los deshabilito y/o desinstalo?
Gracias por su ayuda
↧

TUMBLEWEED Problem entering sleep S3

July 11, 2018, 12:24 am
$
0
0
It appears my system running openSUSE Tumbleweed doesn't want to enter sleep S3 mode and is reverting to S2 sleep which is powering down the hard drives and monitor goes to sleep but the CPU fan continues running. I have attached a dump of the dmesg log from the event when I click Suspend to when I wake it up again.
Can anyone interpret what might be the cause of this and how can I fix it so my PC goes in to S3 sleep?

Code:
[176241.538202] PM: suspend entry (deep)[176241.538204] PM: Syncing filesystems ... done.
[176241.598183] Freezing user space processes ... (elapsed 0.001 seconds) done.
[176241.599890] OOM killer disabled.
[176241.599890] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[176241.601188] Suspending console(s) (use no_console_suspend to debug)
[176241.601735] e1000e: EEE TX LPI TIMER: 00000011
[176241.615744] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[176241.615758] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[176241.615910] sd 1:0:0:0: [sdb] Stopping disk
[176241.624640] sd 0:0:0:0: [sda] Stopping disk
[176243.056004] ACPI: Preparing to enter system sleep state S3
[176243.056702] PM: Saving platform NVS memory
[176243.056714] Disabling non-boot CPUs ...
[176243.079795] IRQ 28: no longer affine to CPU1
[176243.080822] smpboot: CPU 1 is now offline
[176243.103912] IRQ 16: no longer affine to CPU2
[176243.104959] smpboot: CPU 2 is now offline
[176243.131982] IRQ 24: no longer affine to CPU3
[176243.133004] smpboot: CPU 3 is now offline
[176243.133429] Enabling non-boot CPUs ...
[176243.133561] x86: Booting SMP configuration:
[176243.133564] smpboot: Booting Node 0 Processor 1 APIC 0x2
[176243.134911]  cache: parent cpu1 should not be sleeping
[176243.135439] CPU1 is up
[176243.135570] smpboot: Booting Node 0 Processor 2 APIC 0x4
[176243.136925]  cache: parent cpu2 should not be sleeping
[176243.137485] CPU2 is up
[176243.137619] smpboot: Booting Node 0 Processor 3 APIC 0x6
[176243.138823]  cache: parent cpu3 should not be sleeping
[176243.139063] CPU3 is up
[176243.142495] ACPI: Waking up from system sleep state S3
[176243.199099] sd 0:0:0:0: [sda] Starting disk
[176243.199100] sd 1:0:0:0: [sdb] Starting disk
[176243.510279] ata8: SATA link down (SStatus 0 SControl 300)
[176243.510313] ata7: SATA link down (SStatus 0 SControl 300)
[176243.578148] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[176243.578193] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[176243.578219] ata3: SATA link down (SStatus 0 SControl 300)
[176243.578261] ata4: SATA link down (SStatus 0 SControl 300)
[176243.578287] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[176243.578309] ata6: SATA link down (SStatus 0 SControl 300)
[176243.579604] ata1.00: NCQ Send/Recv Log not supported
[176243.580208] ata1.00: NCQ Send/Recv Log not supported
[176243.580218] ata1.00: configured for UDMA/133
[176243.591270] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[176243.591283] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[176243.591286] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[176243.617431] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[176243.617434] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[176243.617437] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[176243.629920] ata5.00: configured for UDMA/100
[176243.735548] usb 1-9.4: reset low-speed USB device number 6 using xhci_hcd
[176247.344166] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[176247.478827] ata2.00: configured for UDMA/133
[176247.491859] ata1.00: Enabling discard_zeroes_data
[176247.515036] OOM killer enabled.
[176247.515037] Restarting tasks ...
[176247.515249] pci_bus 0000:04: Allocating resources
[176247.515265] pci 0000:03:00.0: PCI bridge to [bus 04]
[176247.515268] pci 0000:03:00.0:  bridge window [io  0x2000-0x2fff]
[176247.515275] pci 0000:03:00.0:  bridge window [mem 0xbfa00000-0xbfbfffff]
[176247.515280] pci 0000:03:00.0:  bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
[176247.525997] done.
[176247.526140] video LNXVIDEO:00: Restoring backlight state
[176247.526144] PM: suspend exit
[176247.526176] PM: suspend entry (s2idle)
[176247.526177] PM: Syncing filesystems ... done.
[176247.540430] Freezing user space processes ... (elapsed 0.002 seconds) done.
[176247.542563] OOM killer disabled.
[176247.542564] Freezing remaining freezable tasks ... (elapsed 0.072 seconds) done.
[176247.614910] Suspending console(s) (use no_console_suspend to debug)
[176247.664332] e1000e: EEE TX LPI TIMER: 00000011
[176247.770287] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[176247.770301] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[176247.770439] sd 1:0:0:0: [sdb] Stopping disk
[176247.771662] sd 0:0:0:0: [sda] Stopping disk
[176252.876131] sd 0:0:0:0: [sda] Starting disk
[176252.876156] sd 1:0:0:0: [sdb] Starting disk
[176253.182590] ata8: SATA link down (SStatus 0 SControl 300)
[176253.182625] ata7: SATA link down (SStatus 0 SControl 300)
[176253.258815] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[176253.258898] ata6: SATA link down (SStatus 0 SControl 300)
[176253.258941] ata3: SATA link down (SStatus 0 SControl 300)
[176253.258970] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[176253.258994] ata4: SATA link down (SStatus 0 SControl 300)
[176253.259118] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[176253.259863] ata1.00: NCQ Send/Recv Log not supported
[176253.260605] ata1.00: NCQ Send/Recv Log not supported
[176253.260612] ata1.00: configured for UDMA/133
[176253.271957] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[176253.271969] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[176253.271972] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[176253.298213] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[176253.298217] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[176253.298220] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[176253.300224] usb 1-9.4: reset low-speed USB device number 6 using xhci_hcd
[176253.310716] ata5.00: configured for UDMA/100
[176255.973359] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[176259.154117] ata2.00: configured for UDMA/133
[176259.166062] ata1.00: Enabling discard_zeroes_data
[176259.199088] OOM killer enabled.
[176259.199089] Restarting tasks ... done.
[176259.201648] video LNXVIDEO:00: Restoring backlight state
[176259.201652] PM: suspend exit
ewan@yoda-linux:~>
↧
↧

LEAP 42.3 how to do nothing when I open laptop lid

July 11, 2018, 12:43 am
$
0
0
On my laptop with leap 42.3, DE=plasma 5.13.2, KDE frameworks 5.47.0, KDE applications 18.4.2, Kernel 4.4.138-59-default, when I open the lid the laptop resume from ram (becouse I sleeped it), I would like to do nothing leaving the laptop off, in energy saving module there is the only option "when laptop lid is closed", is it possible to do nothing when I open the laptop lid?
↧

LEAP 42.3 xRDP - keyboard layouts changing not working

July 11, 2018, 1:13 am
$
0
0
Hello.

I have a problem with changing keyboard layout when connected to my desktop via RDP from Windows machine (in Xvnc and Xorg sessions) and from Remmina client (in Xvnc session). The keyboard indicator on panel is indicates that layout has changed, but text keeps printing symbols in main language (i.e. if it was RU, it keeps printing RU symbols and if it was EN it keeps EN). Combination of Remmina + Xorg session are working fine.

I checked debug log of xrdp and xrdp-seasman - there's nothing iformation about any keyboard layout or input issues. Checked that km-00000419.ini is presented. Also upgraded xrdp from 0.9.0 to 0.9.7 but it doesn't help.

Any ideas how to fix it?
↧
Search

LEAP 42.3 Upgrading to Leap 15

July 11, 2018, 1:21 am
$
0
0
opensusers,

Currently, on 42.3 the kernel is using the r8169 driver for a Realtek RTL810xE PCI Express Fast Ethernet controller.

On 15 does this currently work? What is the replacement for the r8169 driver? I have used the kde live version of 15 and the ethernet does not work, however the wireless does.

The 15 installation usb hangs on trying to load the driver for RTL810xE.

Any help here?:sarcastic:

How do I when upgrading to 15???:

https://software.opensuse.org/packag...lacklist-r8169
↧

LEAP 15 Leap 15 install GPT partition table corrupt

July 11, 2018, 2:41 am
$
0
0
Done a clean install (with GPT Partition table) from DVD on my Dell E6410 laptop (new SSD). After the install is complete and subsequently running gparted to check on the disk, I get the message from gparted "the backup gpt table is corrupt, but the primary appears OK, so that will be used"

I would like any experience on this issue that anyone might care to contribute. The laptop predates EUFI facility. The system does not seem to fail in any obvious way.
↧
↧

LEAP 15 "Error parsing PCC subspaces from PCCT" on Leaf 15

July 11, 2018, 5:35 am
$
0
0
I installed Leap 15 on a Dell Precision 5820, which came installed with Ubuntu 16. I am using a legacy BIOS (not EFI) boot, even if the computer is EFI capable (and Ubuntu was in fact installed with an EFI bootloader). The disk also contains a 5Gb partition with some Dell diagnostics, which I thought better to keep. The system is fine, except that at boot it shows the error:

"Error parsing PCC subspaces from PCCT"

From some posts on Fedora it is suggested that this is a kernel bug: https://bugzilla.redhat.com/show_bug.cgi?id=1435837#c82

Other websites suggest that it might be related to the (possibly) mixed bios/efi boot.

Did anyone else experienced the same problem with Leaf 15?

Thanks
↧

TUMBLEWEED The problem with Gnome on openSUSE

July 11, 2018, 6:39 am
$
0
0
The problem is that some applications do not respond to a mouse click.In Cheese, I can not select a click by any effect. In Gnome Maps, I grab the map with the mouse, but I can not drag it. The totem video player does not respond to a click on the playback icon, and if you double-click that window it just turns on the whole screen. Can you please if anyone knows what the reason is. Thank you.
For verification, I downloaded it on my computer to live Fedora mode and everything is working in it. I think the problem is somehow petty but I can not figure it out.
↧

TUMBLEWEED Can't start Brackets

July 11, 2018, 8:30 am
$
0
0
I have Brackets installed on my system, here are the details:

Code:
S  | Name              | Type      | Version                | Arch  | Repository
---+--------------------+------------+-------------------------+--------+-----------
i+ | brackets          | package    | 1.13+git0.49d29a8bc-1.2 | x86_64 | packman   
  | brackets          | srcpackage | 1.13+git0.49d29a8bc-1.2 | noarch | packman   
  | brackets-debuginfo | package    | 1.13+git0.49d29a8bc-1.2 | x86_64 | packman
It used to start and work fine, but now I'm unable to start it.

I have even tried to launch it from CLI, but I don't get any useful info, I don't get any info at all:

Code:
~> brackets
~>
How can I try to solve this? Is there some log that I can check to provide more info?
↧
Viewing all 40713 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>