Quantcast
Channel: openSUSE Forums
Viewing all 40713 articles
Browse latest View live
↧

openSUSE 13.2 Ich glaube ich habe mein System angeknackst

September 9, 2016, 3:27 pm
$
0
0
Ich habe bei opensuse ergänzende Dateien heruntergeladen.
Ich benutze opensuse 13.2.
Jetzt habe ich Leap 42.1 im Grub2.
ich kann die Dateiverwaltung dolphin nicht mehr im Super-User Modus aufrufen.
Yast funktioniert auch nicht mehr richtig.
Die Installation von Aktualisierungen funktioniert auch nicht mehr. Ich bekomme die Nachricht, dass der User die Installation abgebrochen hat.
Was kann ich tun?
↧
Search

Thank you for NOT using Gparted in your installer

September 9, 2016, 4:57 pm
$
0
0
I've been trying to install just about any flavor of Linux and none of them would work, because as soon as they probed for drives, the installers would all crash. A quick live cd made it clear the issue was with Gparted crashing. I wish I could recall the long error that was displayed, but basically, it had to do with my volume labels (it's an outstanding bug).

The only "solution" every kept coming up with was to wipe your drive clean and start over. I didn't see that as a solution because I had Windows 10 and XP running exactly how I wanted them and only wanted to add Linux.

I tried Debian, Ubuntu, Fedora, CentOS, ect.. ect.. ONLY OpenSuSe was able to install and ONLY OpenSuSe could correctly format my 2 partitions without hurting the rest of my drive.

Thank you!!!
↧
↧

TUMBLEWEED Advice please on slow boot process

September 10, 2016, 12:23 am
$
0
0
I had noticed my TW boot had slowed down on my dekstop PC recently so decided to run systemd-analyze blame and it showed
Code:
34.145s systemd-journal-flush.service
which is the longest process by far. Running journalctl --disk-usage shows
Code:
Archived and active journals take up 904.0M on disk.
So any suggestions as to how to improve this please?

Stuart
↧

OTHER VERSION Unable to connect to ssh server. But able to ping and telnet to the port 22

September 10, 2016, 3:27 am
$
0
0
Server SUSE Linux 11
There are two servers with different networks
1. 10.3.5.81
2. 10.3.4.124

# ping 10.3.4.124
PING 10.3.4.124 (10.3.4.124) 56(84) bytes of data.
64 bytes from 10.3.4.124: icmp_seq=1 ttl=63 time=0.380 ms

# telnet 10.3.4.124 22
Trying 10.3.4.124...
Connected to 10.3.4.124.
Escape character is '^]'.
SSH-2.0-OpenSSH_6.6.1

# ssh -v 10.3.4.124
OpenSSH_6.6.1, OpenSSL 0.9.8j-fips 07 Jan 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug1: Connecting to 10.3.4.124 [10.3.4.124] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1
debug1: match: OpenSSH_6.6.1 pat OpenSSH_6.6.1* compat 0x04000000
debug1: SSH2_MSG_KEXINIT sent
After that it hangs....
But when i connect from outside the network to both the server using ssh i can able to connect. but its not working with each other.

tcpdump report
# tcpdump -i eth0 port 22 and host 10.3.4.124
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
19:36:13.047860 IP egabhs1.64491 > egabh10ci.ssh: S 1482777917:1482777917(0) win 17920 <mss 8960,sackOK,timestamp 9525071 0,nop,wscale 7>
19:36:13.048312 IP egabh10ci.ssh > egabhs1.64491: S 2106360063:2106360063(0) ack 1482777918 win 17896 <mss 8960,sackOK,timestamp 19123419 9525071,nop,wscale 7,nop,opt-14:03>
19:36:13.048331 IP egabhs1.64491 > egabh10ci.ssh: . ack 1 win 140 <nop,nop,timestamp 9525071 19123419>
19:36:13.048680 IP egabhs1.64491 > egabh10ci.ssh: P 1:24(23) ack 1 win 140 <nop,nop,timestamp 9525071 19123419>
19:36:13.048959 IP egabh10ci.ssh > egabhs1.64491: . ack 24 win 140 <nop,nop,timestamp 19123419 9525071>
19:36:13.060436 IP egabh10ci.ssh > egabhs1.64491: P 1:24(23) ack 24 win 140 <nop,nop,timestamp 19123420 9525071>
19:36:13.060457 IP egabhs1.64491 > egabh10ci.ssh: . ack 24 win 140 <nop,nop,timestamp 9525072 19123420>
19:36:13.060727 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525072 19123420>
19:36:13.267861 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525093 19123420>
19:36:13.687927 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525135 19123420>
19:36:14.527864 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525219 19123420>
19:36:16.207860 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525387 19123420>
19:36:19.577931 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9525724 19123420>
19:36:26.317925 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9526398 19123420>
19:36:39.777932 IP egabhs1.64491 > egabh10ci.ssh: P 24:1896(1872) ack 24 win 140 <nop,nop,timestamp 9527744 19123420>

Please let me know if you need any other information."



↧

Установка Compiz на 42.1

September 10, 2016, 5:57 am
$
0
0
И снова здрасьте) Подскажите плиз гайд по установке компиза на 42.1. Все статьи что я находил - на более старые версии. И вообще нужен ли компиз для пафосных эффектов вращения рабочих столов?)
↧
↧

TUMBLEWEED TW suddenly does not boot to GUI, Boots to command prompt

September 10, 2016, 6:36 am
$
0
0
As states, The last few boots, TW booted to command login prompt.
After logging in, with about 5 seconds, the GUI splash (showing the loading bar momentarily) showed up and I was presented with a full GUI system.
WHat is going on here, and how do I fix it?
thanks in advance
John KIlbert
↧

TUMBLEWEED No graphical login after snapshot 20160907

September 10, 2016, 6:49 am
$
0
0
Hello,

since snapshot 20160907 the boot process ends with text console on tty1.
On tty7 I have only the boot messages.
Login on tty1 as root and executing init 5 start the GUI and I can log in KDE.
Before these snapshots the boot ended with the GUI login.
I didn't change anything else than the snapshots installation via "zypper dup"
Kernel
Linux hpprol2 4.7.2-2-default #1 SMP PREEMPT Mon Aug 29 23:57:41 UTC 2016 (8a962cf) x86_64 x86_64 x86_64 GNU/Linux
Same problem occurs when I use XEN Kernel version or default version
I don't see any error related in dmesg. only Baloo seems to segfault but I don't use it
In the Boot.log the last messages are
Code:
[OK]  Started MySQL server.
[OK]  Started LSB: Domain Name System (DNS) server, named.
[OK]  Reached target Host and Network Name Lookups.
        Starting NTP Server Daemon...
[OK]  Started LSB: Start or stop the Webmin server.
[OK]  Started NTP Server Daemon.
[OK]  Reached target System Time Synchronized.
        Starting The Apache Webserver...
        Starting ISC DHCPv4 Server...
        Starting Postfix Mail Transport Agent...
[OK]  Started ISC DHCPv4 Server.
[OK]  Started The Apache Webserver.
        Starting Terminate Plymouth Boot Screen...
Seems that Plymouth hangs or don't terminate?
journalctl shows this ( end of the boot process)
Code:
Sep 10 07:29:55 hpprol2 systemd[1]: Starting Terminate Plymouth Boot Screen...
Sep 10 07:29:55 hpprol2 systemd[1]: Received SIGRTMIN+21 from PID 370 (plymouthd).
Sep 10 07:29:55 hpprol2 systemd[1]: Started Terminate Plymouth Boot Screen.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termin
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termina
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termi
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termin
Sep 10 07:29:55 hpprol2 systemd[1]: Started Hold until boot process finishes up.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit-wait comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? t
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit-wait comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? te
Sep 10 07:29:55 hpprol2 postfix/master[1822]: daemon started -- version 3.1.1, configuration /etc/postfix
Sep 10 07:29:55 hpprol2 systemd[1]: Started Getty on tty1.
Sep 10 07:29:55 hpprol2 systemd[1]: Reached target Login Prompts.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=
Sep 10 07:29:55 hpprol2 systemd[1]: Started /etc/init.d/after.local Compatibility.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=after-local comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal
Sep 10 07:29:55 hpprol2 systemd[1]: Started Postfix Mail Transport Agent.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=postfix comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? r
Sep 10 07:29:55 hpprol2 systemd[1]: Started Command Scheduler.
Sep 10 07:29:55 hpprol2 systemd[1]: Reached target Multi-User System.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cron comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=
Sep 10 07:29:55 hpprol2 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Sep 10 07:29:55 hpprol2 audit[1845]: SYSTEM_RUNLEVEL pid=1845 uid=0 auid=4294967295 ses=4294967295 msg='old-level=N new-level=3 comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-
Sep 10 07:29:55 hpprol2 systemd[1]: Started Update UTMP about System Runlevel Changes.
Sep 10 07:29:55 hpprol2 systemd[1]: Startup finished in 4.376s (kernel) + 12.949s (initrd) + 16.046s (userspace) = 33.371s.
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp-runlevel comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 10 07:29:55 hpprol2 audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp-runlevel comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sep 10 07:29:55 hpprol2 cron[1844]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 78% if used.)
Sep 10 07:29:55 hpprol2 cron[1844]: (CRON) INFO (running with inotify support)
If I go to yast to see the bootloader option and exit with OK I receive an error
Code:
Internal error: Please report a bug report with logs.
Details:Unknown udev device /dev/disk/by-label/msdos
Caller: /usr/share/YaSTé/lib/bootloader/udev_mapping.rb:33.in 'to_kernel_device'
I don't have a Windows partition only Unix partitions (all EXT4) and swap

My graphic card is a Nvidia quadro 4000 with two monitors and I'm using nouveau as driver

Any Idea?
Many thanks in advance
Philippe
↧

[security-announce] SUSE-SU-2016:2286-1: important: Security update for java-1_7_0-ibm

September 10, 2016, 7:10 am
$
0
0
SUSE Security Update: Security update for java-1_7_0-ibm ______________________________________________________________________________ Announcement ID: SUSE-SU-2016:2286-1 Rating: important References: #992537 Cross-References: CVE-2016-3485 CVE-2016-351...

More...
↧
Search

LEAP 42.1 Problem updating [libopencv3_1-3.1.0-91.20.x86_64.rpm]

September 10, 2016, 7:20 am
$
0
0
Good morning !

I'm trying to update my system but an strange error insists to occur.

My repo list is:

Code:
[leonardo@alice ~]$ zypper lr -d
#  | Alias                              | Name                                    | Enabled | GPG Check | Refresh | Priority | Type  | URI                                                                          | Service
---+-------------------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+------------------------------------------------------------------------------+--------
 1 | cuda-7-5-local                      | cuda-7-5-local                          | Yes    | (r ) Yes  | No      |  99    | rpm-md | file:/var/cuda-repo-7-5-local                                                |       
 2 | download.nvidia.com-leap            | nVidia Graphics Drivers                | Yes    | (r ) Yes  | No      |    3    | rpm-md | http://download.nvidia.com/opensuse/leap/42.1                                |       
 3 | download.opensuse.org-non-oss      | Main Repository (NON-OSS)              | Yes    | (r ) Yes  | Yes    |    1    | yast2  | http://download.opensuse.org/distribution/leap/42.1/repo/non-oss/            |       
 4 | download.opensuse.org-non-oss_1    | Update Repository (Non-Oss)            | Yes    | (r ) Yes  | Yes    |    1    | rpm-md | http://download.opensuse.org/update/leap/42.1/non-oss/                      |       
 5 | download.opensuse.org-oss          | Main Repository (OSS)                  | Yes    | (r ) Yes  | Yes    |    1    | yast2  | http://download.opensuse.org/distribution/leap/42.1/repo/oss/                |       
 6 | download.opensuse.org-oss_1        | Main Update Repository                  | Yes    | (r ) Yes  | Yes    |    1    | rpm-md | http://download.opensuse.org/update/leap/42.1/oss                            |       
 7 | ftp.gwdg.de-suse                    | Packman Repository                      | Yes    | (r ) Yes  | Yes    |    2    | rpm-md | http://ftp.gwdg.de/pub/linux/packman/suse/openSUSE_Leap_42.1/                |       
 8 | http-download.opensuse.org-64a28cc6 | X11:Bumblebee                          | Yes    | (r ) Yes  | Yes    |    3    | rpm-md | http://download.opensuse.org/repositories/X11:/Bumblebee/openSUSE_Leap_42.1/ |       
 9 | openSUSE-42.1-0                    | openSUSE-42.1-0                        | Yes    | (r ) Yes  | No      |  99    | yast2  | cd:///?devices=/dev/disk/by-id/ata-TSSTcorp_CDDVDW_SU-208GB_S16U6YJG3000HL  |       
10 | repo-debug                          | openSUSE-Leap-42.1-Debug                | No      | ----      | Yes    |  99    | NONE  | http://download.opensuse.org/debug/distribution/leap/42.1/repo/oss/          |       
11 | repo-debug-non-oss                  | openSUSE-Leap-42.1-Debug-Non-Oss        | No      | ----      | Yes    |  99    | NONE  | http://download.opensuse.org/debug/distribution/leap/42.1/repo/non-oss/      |       
12 | repo-debug-update                  | openSUSE-Leap-42.1-Update-Debug        | No      | ----      | Yes    |  99    | NONE  | http://download.opensuse.org/debug/update/leap/42.1/oss                      |       
13 | repo-debug-update-non-oss          | openSUSE-Leap-42.1-Update-Debug-Non-Oss | No      | ----      | Yes    |  99    | NONE  | http://download.opensuse.org/debug/update/leap/42.1/non-oss/                |       
14 | repo-source                        | openSUSE-Leap-42.1-Source              | No      | ----      | Yes    |  99    | NONE  | http://download.opensuse.org/source/distribution/leap/42.1/repo/oss/        |       
15 | repo-update                        | openSUSE-Leap-42.1-Update              | Yes    | (r ) Yes  | Yes    |    2    | rpm-md | http://download.opensuse.org/update/leap/42.1/oss/                          |       
[leonardo@alice ~]$
When I run zypper refresh and then zypper up this error occur...

Code:
Retrieving: libopencv3_1-3.1.0-91.20.x86_64.rpm ........................................................................................................................................................[error]
File './Essentials/x86_64/libopencv3_1-3.1.0-91.20.x86_64.rpm' not found on medium 'http://ftp.gwdg.de/pub/linux/packman/suse/openSUSE_Leap_42.1/'

Abort, retry, ignore? [a/r/i/? shows all options] (a): r
I have not updated my system in a while (~ 2 weeks).

Any tips on how to solve it ?

Thank you all !

cheers
↧
↧

openSUSE 13.2 How to access failsafe mode from bootloader in openseuse 13.2

September 10, 2016, 8:51 am
$
0
0
hello dear linux-experts,


How to access failsafe mode from bootloader in openseuse 13.2

i need to do some erasings in the log-files since the system does not start correcly. #

Question i need to access the comand line - how to do this!?


btw: need to erase the logfiles:


1. rm -rf /var/log/*
2. dmesg -c
3. reboot Since this works,

this would be possible too. - if logrotate is installed..

sudo /etc/cron.daily/logrotate


- therefore i am in need to get to the commandline

note: the systems does not start regularily
↧

LEAP 42.1 CPU-Temperatur

September 10, 2016, 9:07 am
$
0
0
Hallo,
gibt es ein Programm, das mir die Temperatur der CPU und ggf. des Graphik-Chips anzeigt?
Grüße
↧

EVERGREEN EPSON ET-4500 (EcoTank wireless printer)

September 10, 2016, 11:16 pm
$
0
0
I just wonder if anyone can help me set up this NEW printer. I managed to set it up in Windows with a minimum of fuss but am finding it difficult in opensSUSE 13.1 I have running on an older laptop.
YAST does not seem to find it and when I put in the address (192.168.1.225) which was obtained from my Android Epson iPrint facility I am faced with a list of many epson printers but not this one (ET-4500). I'm not sure I'll even make it work connecting it directly via a USB cable as I can still not find it listed. I even downloaded an epson rpm which appeared to install automatically with YAST but am no wiser yet as to what to do next?
Any help would be appreciated. Many thanks in advance.:P
↧

openSUSE 13.2 why i only can access GRUB rescue - and not the ordinary GRUB Menu?

September 10, 2016, 11:21 pm
$
0
0
hello dear community,


while trying to access GRUB 2 Menu i get the following message:

invalid Recovery AreaGRUB loading.

Wellcome to GRUB!

error: unknown fileysystem.
Entering rescue mode....

grub rescue


in earlier times i was able to get the GRUB Menu


why cannot i get there -
↧
↧

LEAP 42.1 Issues with recent updates

September 11, 2016, 3:13 am
$
0
0
Hi,

I am having 2 problems with updating my laptop. I'm running KDE. My laptop is the 2015 Dell XPS 13 with Broadcom Wifi.

Firstly, it is requesting that I update NetworkManager. When I do this, Networkmanager connects to wireless and wired networks but it does not connect to the internet. When I open my web browser, it says "Server not found". The packages it is updating are:
NetworkManager-branding-upstream (1.4.0-287.1)
NetworkManager-lang (1.4.0-287.1)
NetworkManager-vpnc-lang (1.0.8-85.1)
NetworkManager-vpnc (1.0.8-85.1)
NetworkManager (1.4.0-287.1)

The second problem is that on the GUI software updater, there are updates showing which cannot be updated because dependencies cannot be resolved. These do not show up while running zypper up from the Konsole. These packages are:
opensuse-2016-1034
opensuse-2016-724
opensuse-2016-972
opensuse-2016-997

Please could someone advise me on what causes these problems and how to fix, or to help me debug the problem further.

Thank you in advance
↧

LEAP 42.1 Struggling to Uninstall nVidia drivers, can't start xorg now

September 11, 2016, 4:45 am
$
0
0
I have been trying to upgrade from LEAP 42.1 to Tumbleweed and thought it best to uninstall the proprietary Nvidia drivers before upgrading.

I followed the instructions on the wiki about how to uninstall the Nvidia drivers, but zypper/YaST cannot remove nvidia-glG04 - it just gets stuck at 5% and then after maybe 30 minutes gives a lot of errors. All the other nvidia packages from the nvidia repo have been removed.

Now when I boot, it hangs at Starting Locale. I can login (after pressing ctrl+alt_f1) in the command line and check the Xorg log which says:

"LoadModule: "glx"
Failed to load...
UnloadModule: "glx"
LoadModule: "nvidia"
Warning, couldn't open module "nvidia
No drivers available"

That's the jist of it. I've tried to switch to nouveau using yast from the command line but it didn't seem to do much. I'm at a bit of a dead end at the moment, although I'm sure the solution isn't going to be complicated.
↧
Search

openSUSE 13.2 [intel graphics] opengl

September 11, 2016, 5:48 am
$
0
0
Greetings !!

I have had some issues with the installation of a sufficient version of opengl to open the road to big applications for my students in my lab.
We have bought some "new" computers equipped with G4400 processors and HD 510 video chipset.

The problem is that I don't want to upgrade to LEAP, I have my reasons, (my test machine with LEAP has the same issue as I have a i5 processor in it).
I also have another i5 with 13.2 and I experience the same issue.

I shortcuted the issues as related to intel familly processors as all the amd computers have a working opengl environment.

The problem is that I never found a driver for the intel equipped computers.

The window manager (KDE/Gnome) has loaded the MESA driver (10.3.7 for most of all, on the LEAP computer I got 11.0.8)
In the 14 computers equipped with intel processors I got lot of skylake, one haswell and one ivybridge chipsets. As far as I'm correct.

The focus here will go straight on the skylake computers.

I tried to install the lastest MESA driver on those computers... I got kinfocenter telling me that 12.0.2 was installed, but once rebooted the computer I have no more opengl installed.
I got a message in the kinfocenter telling me "can't intialize opengl" when trying to get graphical environment informations related to opengl.

Same when trying to launch opengl applications developped by my students: can not intialize opengl or something more precise I did not write down.
I switched back to MESA 10.3.7 (it's so simple, it's amazing).

My question is: is somebody or a crew are interrested to tell me how I could install the correct intel drivers in order to have the great joy to exploit the full opengl capabilities of the intel's chipsets ??

I know that X rely not only on MESA to use opengl so installing MESA 12.0.2 without telling X to use it with KDE/Gnome may be the point I missed (that the poor explanation I have regarding the failure I described above).
As the 13.2 and LEAP 42.1 have their proper MESA drivers I think it's normal kInfoCenter won't do nothing more than display that MESA 12.0.2 is installed (note that code executed under this environment uses MESA 12.0.2) but once rebooted there is no more tracks of 12.0.2, the opengl is simply kicked off.

I tried to download and install the intel drivers from their site but none of those I tried were working... they seem to provide ubuntu, fedora drivers but nothing for our beloved opensuse distrib :{
The source code have to be modified to avoid compile code for fedora/ubuntu/... and I never succeeded to make the whole stuff work. I have no sufficient patience and knowledge :{

Thanks for your patience...
↧

LEAP 42.1 Terratec G1 Videocapture

September 11, 2016, 8:00 am
$
0
0
Dag allen,

Hardware:
Desktop met quad AMD FX
8gb intern
ssd 240 gb
hdd 2 tb
Video NVIDIA GF119 [GeForce GT 520]

Ik heb een terratec G1 videocapture apparaat om analoge videosignalen van een videorecorder of camera om te zetten. Aansluiting via usb. Ben al een weekje bezig met zoeken en lezen. Mijn computer "ziet" het usb apparaat wel. In Kdenlive wordt het apparaat Terratec Grabby genoemd maar levert geen beeld op.
In YAST hardware wordt ie gezien en correct benoemd. Ook de module in de kernel "em28xx" is geladen.
Waarom kan ik dan toch geen signaal zichtbaar/hoorbaar krijgen in KDEnlive?

Grtz Kage
↧
↧

How about a QUIS?

September 11, 2016, 9:59 am
$
0
0
What system am I running?
Code:
Linux DESKTOP-SAEEGBE 3.4.0+ #1 PREEMPT Thu Aug 1 17:06:05 CST 2013 x86_64 x86_64 x86_64 GNU/Linux
↧

LEAP 42.1 Can't connect to internet with realtek wireless card

September 11, 2016, 10:37 am
$
0
0
Hello, all!

I am using opensuse 42.1 and I can't establish internet connection with realtek wireless card.

Code:
~> /sbin/lspci -nn|grep Network
01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
Code:
~> lsmod |grep rtl8192se

rtl8192se              86016  0
rtl_pci                36864  1 rtl8192se
rtlwifi                98304  2 rtl_pci,rtl8192se
mac80211              819200  3 rtl_pci,rtlwifi,rtl8192se

Code:
~> dmesg |grep rtl8192se
Loading firmware rtlwifi/rtl8192sefw.bin
Code:
~> uname -r
4.1.27-27-default

Code:
~> /usr/sbin/iwlist wlan0 scanning
wlan0    No scan results
Code:
~> /usr/sbin/iw wlan0 info
Interface wlan0
    ifindex 2
    wdev 0x1
    addr 1c:65:9d:56:42:40
    type managed
    wiphy 0
Code:
~> ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether 1c:65:9d:56:42:40 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 80:ee:73:11:6b:b6 brd ff:ff:ff:ff:ff:ff
Itried to bring it up:

Code:
~> sudo ip link set wlan0 up
But I had no success...

Code:
~> ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether 1c:65:9d:56:42:40 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 80:ee:73:11:6b:b6 brd ff:ff:ff:ff:ff:ff
I woul appreciate some help.
Thanks
↧

LEAP 42.1 openVPN HMAC errors PrivateInternetAccess vpn

September 11, 2016, 10:44 am
$
0
0
I use openVPN to access https://www.privateinternetaccess.com/. It seems to be working (their site shows me being protected), but if I check my journal using:

Code:
# journalctl -p err -b
there are many errors with the following:

Code:
Sep 11 11:09:33 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 11:17:14 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 11:18:18 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 11:19:59 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 11:41:12 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 12:48:26 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 12:48:40 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Sep 11 12:58:22 chygra openvpn[15948]: Authenticate/Decrypt packet error: packet HMAC authentication failed
Can anyone point me to what I should be looking for to fix this?
↧
Viewing all 40713 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>