Quantcast
Channel: openSUSE Forums
Viewing all 40713 articles
Browse latest View live
↧

TUMBLEWEED Blank Sound

December 9, 2017, 4:42 pm
$
0
0
I have an issue with Tumbleweed for the last 2 months with all the desktops KDE, Mate, XFCE, etc...

When it boots into desktop my speakers return a blank sound like (brrrrrr) continuously, when something plays this (brrrrrr) disappears I don't have this issue on Leap any idea what might cause this?

I'm 100% sure is not the hardware.
↧
Search

TUMBLEWEED MAC address issue: differences with internal and USB wifi adapters, TW and Mint

December 9, 2017, 10:48 pm
$
0
0
openSUSE tumbleweed KDE 32-bit is installed on my ThinkPad X41, dual-booting with Mint KDE 18.2 32-bit. TW using the internal wifi adapter will not connect to my home network but will connect to the building network. TW using a Belkin USB adapter connects to both networks. Mint using both adapters connects to both networks.

The problem seems to be TW with the internal adapter generates random MAC address for the device. My home network uses MAC address filtering, so the random addresses are denied access. The building network does not filter, so it connects. Somehow, TW uses the actual hardware MAC for the Belkin, so it connects to the home router. Mint always uses the actual hardware MAC for both devices, so they connect.

Hardware info is
Code:
X41int-oS-TWKDE:/home/howard # /usr/sbin/hwinfo --wlan
16: PCI 402.0: 0282 WLAN controller                           
  [Created at pci.378]
  Unique ID: TsNy.RekRcsD7b4A
  Parent ID: 6NW+.InKz0bgid89
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:04:02.0
  SysFS BusID: 0000:04:02.0
  Hardware Class: network
  Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x4220 "PRO/Wireless 2200BG [Calexico2] Network Connection"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x2711
  Revision: 0x05
  Driver: "ipw2200"
  Driver Modules: "ipw2200"
  Device File: wlp4s2
  Features: WLAN
  Memory Range: 0xa0202000-0xa0202fff (rw,non-prefetchable)
  IRQ: 21 (no events)
  HW Address: 5a:84:e2:51:7e:69
  Permanent HW Address: 00:11:22:33:44:55
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
  WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Requires: ipw-firmware
  Module Alias: "pci:v00008086d00004220sv00008086sd00002711bc02sc80i00"
  Driver Info #0:
    Driver Status: ipw2200 is active
    Driver Activation Cmd: "modprobe ipw2200"                                                                                                 
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                   
  Attached to: #1 (PCI bridge)                                                                                                               
X41int-oS-TWKDE:/home/howard #
Note there is a Permanent HW Address (edited), which is in the home router's permitted list. The preceding line gives a HW Address that would be unable to connect to the home router.
inxi output taken at several different times when the USB adapter was attached show
Quote:
howard@X41int-oS-TWKDE:~> inxi -Nn
Network: Card-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express driver: tg3
IF: enp2s0 state: down mac: 00:0a:e4:3f:8b:6d
Card-2: Intel PRO/Wireless 2200BG [Calexico2] Network Connection driver: ipw2200
IF: wlp4s2 state: down mac: ca:f9:f6:07:07:7f
Card-3: Belkin F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU] driver: rtl8192du
IF: wlp0s29f7u3 state: N/A mac: N/A
howard@X41int-oS-TWKDE:~>

howard@X41int-oS-TWKDE:~> inxi -Nn
Network: Card-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express driver: tg3
IF: enp2s0 state: down mac: 00:0a:e4:3f:8b:6d
Card-2: Intel PRO/Wireless 2200BG [Calexico2] Network Connection driver: ipw2200
IF: wlp4s2 state: down mac: 42:77:3c:3c:b6:de
Card-3: Belkin F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU] driver: rtl8192du
IF: wlp0s29f7u3 state: N/A mac: N/A
howard@X41int-oS-TWKDE:~>

howard@X41int-oS-TWKDE:~> inxi -Nn
Network: Card-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express driver: tg3
IF: enp2s0 state: down mac: 00:0a:e4:3f:8b:6d
Card-2: Intel PRO/Wireless 2200BG [Calexico2] Network Connection driver: ipw2200
IF: wlp4s2 state: down mac: 06:90:85:c5:e6:34
Card-3: Belkin F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU] driver: rtl8192du
IF: wlp0s29f7u3 state: N/A mac: N/A
howard@X41int-oS-TWKDE:~>

howard@X41int-oS-TWKDE:~> inxi -Nn
Network: Card-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express driver: tg3
IF: enp2s0 state: down mac: 00:0a:e4:3f:8b:6d
Card-2: Intel PRO/Wireless 2200BG [Calexico2] Network Connection driver: ipw2200
IF: wlp4s2 state: down mac: c6:47:30:0c:28:39
Card-3: Belkin F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU] driver: rtl8192du
IF: wlp0s29f7u3 state: N/A mac: N/A
howard@X41int-oS-TWKDE:~>
The MAC for the internal adapter, wlp4s2, is different each time, and never the actual MAC address. The Belkin shows mac: N/A.

How can I get the system to use the actual hardware MAC address for the internal adapter (like Mint), instead of generating alternative ones?

Thanks,
Howard
↧
↧

LEAP 42.3 Unable to do any updates on Leap 42.3

December 10, 2017, 2:08 am
$
0
0
More or less fresh install of openSUSE 42.3 but unused for about 3 to 4 months.
When I boot up, package kit would start running automatically and stay for hours on "Checking updates".

Killed package kit using:
Code:
sudo killall packagekitd
Then tried using Yast online update. It gets stuck on "Loading Package Manager".

Tried
Code:
zypper update
Absolutely no output.

Checked repository URL's and enabled/autorefresh only the basic four repositories. Retried Yast and zypper. Same results.

Changed network management from "wicked" to NetworkManager as suggested in another thread. No effect.

Now if I try to enter Yast - Software repositories (this is after logging out and logging in again after Yast gets stuck), I get:
"System management is locked by the application with pid 20039 (/usr/bin/ruby). Close this application before trying again.
The only ruby I've heard of (other than the gemstone and the one who took her lips to town) is a programming language and I've never ever used it.

Before, installing openSUSE 42.3, I had briefly installed 42.2 (or perhaps 42.1) I cant remember and had similar problems with updates - which was solved by adding an omitted file separator in the URL for the nvidia repo (unbelievable but true and I had not even entered the URL manually).

There are times perhaps when the repos are not available but this has now happened multiple times over several days.

I successfully (and continuously) used openSUSE 13.1 for over two years - only having to use my Windows 7 system once in the middle after a power failure messed up an update. But after 9/10 months of trying on and off, I have yet to open my account with Leap - there is always some problem or the other and the GUI is laggy and "just doesn't feel right".

I'd be grateful if anyone can help.
↧

TUMBLEWEED Firefox freezes display

December 10, 2017, 2:53 am
$
0
0
Since the update to Firefox 57 it randomly freezes the display, when I scroll down a long page or watch some video.

The display is stuck and displays what it was displaying before, but nothing happens, and I have to reboot the system to fix it. The console ttys still work. In a video the sound still works, and i can stop/continue that.


Code:
$ sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
        Subsystem: Dell Latitude E6410
        Flags: bus master, fast devsel, latency 0, IRQ 25
        Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 70b0 [size=8]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [a4] PCI Advanced Features
        Kernel driver in use: i915
        Kernel modules: i915
↧

TUMBLEWEED Kernel 4.14.x missing module "pas2"

December 10, 2017, 4:04 am
$
0
0
With the current Tumbleweed kernel 4.14.x (i586) I am missing the oss sound driver "pas2.ko".
Looking at the kernel source, the sources for "pas2" are still there.
The config file for the kernel has no entry for the corresponding "CONFIG_SOUND_PAS", which is mentioned in the Makefile,
neither as "#CONFIG_SOUND_PAS" nor as "CONFIG_SOUND_PAS=m", etc..

Is there a reason why this module isn't built anymore?
↧
↧

LEAP 42.3 radeon drive issue

December 10, 2017, 4:56 am
$
0
0
I was facing this issue after upgrade from 42.2 to 42.3. After the latest update of the system, I'm facing a new issue in radeon drive. I'm getting the following error mesage:
Code:
[      3.045230] radeon 0000:00:01.0: radeon_vce: Can't load firmware "radeon/BONAIRE_vce.bin. : failed VCE (-2) init.  [    3.045232] radeon 0000:00:01.0: failed VCE (-2) init.

Please find output of
Code:
mkinitrd
at https://paste.opensuse.org/18833184


I did force installation of
Code:
sudo zypper in -f kernel-firmware
but with no success. Please find the output at https://paste.opensuse.org/87979543


How can I install missing firmware's? Will installing amdgpu kmp and a later version of xf86-video-amdgpu solve the issue? If so, please let me know the steps to install them.

Please find Xorg log in https://paste.opensuse.org/80911205

Read in other forums for this issue - Your simplest and solution will be to use menuconfig (never manually edit the kernel .conf) to set AMDGPU to module and rebuild your kernel. As it is the card cannot load the firmware so naturally it isn't working.Should I update menuconfig?


Many Thanks for your help.
↧

LEAP 42.3 How to reconfigure network settings as WiFi is not working.

December 10, 2017, 9:04 am
$
0
0
Hi I am Rupesh from India and I have Toshiba satellite c55 b894 laptop and I have installed opensuse leap 42.3 about three months ago when it was launched. I have not made any modifications to setting's upto now.

Up to yesterday I am able to browse internet without any problems but at present on the desktop status bar I am able to see messages such as "WiFi disabled by hardware switch", "WiFi hardware disabled" etc.,.

In GNOME I have tried to make WiFi on but failed I mean it is always in off mode.

As network is not working in yast network settings Network Setup Method I have changed to wicked and still there is no use I have changed back to network manager and even no use. At present network is managed by network-manager.

For your reference I am providing the output of the commands iwconfig, hwinfo below.

Code:
linux-tg2q:~ # iwconfig
lo        no wireless extensions.

wlan0    IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated  Tx-Power=off 
          Retry short limit:7  RTS thr:off  Fragment thr:off
          Encryption key:off
          Power Management:off
         
eth0      no wireless extensions.
Code:
linux-tg2q:~ # hwinfo --network
27: None 00.0: 1070a WLAN                                     
  [Created at net.126]
  Unique ID: AYEt.QXn1l67RSa1
  Parent ID: y9sn.lDw4KLRtlV5
  SysFS ID: /class/net/wlan0
  SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:07:00.0
  Hardware Class: network interface
  Model: "WLAN network interface"
  Driver: "ath9k"
  Driver Modules: "ath9k"
  Device File: wlan0
  HW Address: b8:ee:65:7a:30:ee
  Permanent HW Address: b8:ee:65:7a:30:ee
  Link detected: no
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #16 (Network controller)

28: None 00.0: 10700 Loopback
  [Created at net.126]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown

29: None 00.0: 10701 Ethernet
  [Created at net.126]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.oRLpzBYdd+B
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:1c.3/0000:08:00.0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  HW Address: c4:54:44:69:aa:49
  Permanent HW Address: c4:54:44:69:aa:49
  Link detected: no
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (Ethernet controller)
linux-tg2q:~ #
Code:
linux-tg2q:~ # hwinfo --netcard
22: PCI 700.0: 0282 WLAN controller                           
  [Created at pci.378]
  Unique ID: y9sn.neoVruR_9l3
  Parent ID: hoOk.RhvJpbq0tG2
  SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:07:00.0
  SysFS BusID: 0000:07:00.0
  Hardware Class: network
  Model: "Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter"
  Vendor: pci 0x168c "Qualcomm Atheros"
  Device: pci 0x0036 "QCA9565 / AR9565 Wireless Network Adapter"
  SubVendor: pci 0x11ad "Lite-On Communications Inc"
  SubDevice: pci 0x0832
  Revision: 0x01
  Driver: "ath9k"
  Driver Modules: "ath9k"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xc2700000-0xc277ffff (rw,non-prefetchable)
  Memory Range: 0xc2780000-0xc278ffff (ro,non-prefetchable,disabled)
  IRQ: 18 (no events)
  HW Address: b8:ee:65:7a:30:ee
  Permanent HW Address: b8:ee:65:7a:30:ee
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v0000168Cd00000036sv000011ADsd00000832bc02sc80i00"
  Driver Info #0:
    Driver Status: ath9k is active
    Driver Activation Cmd: "modprobe ath9k"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #14 (PCI bridge)

23: PCI 800.0: 0200 Ethernet controller
  [Created at pci.378]
  Unique ID: rBUF.oRLpzBYdd+B
  Parent ID: Z7uZ.TWopmk3Rw13
  SysFS ID: /devices/pci0000:00/0000:00:1c.3/0000:08:00.0
  SysFS BusID: 0000:08:00.0
  Hardware Class: network
  Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  SubVendor: pci 0x1179 "Toshiba America Info Systems"
  SubDevice: pci 0xf920
  Revision: 0x0c
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  I/O Ports: 0x4000-0x4fff (rw)
  Memory Range: 0xc2600000-0xc2600fff (rw,non-prefetchable)
  Memory Range: 0xc2400000-0xc2403fff (ro,non-prefetchable)
  IRQ: 50 (no events)
  HW Address: c4:54:44:69:aa:49
  Permanent HW Address: c4:54:44:69:aa:49
  Link detected: no
  Module Alias: "pci:v000010ECd00008168sv00001179sd0000F920bc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)
linux-tg2q:~ #
Another issue is I have entered network services (xinetd) and it is showing as disabled and when I select enable and then finish I am getting warning as " All services are marked as disabled ( locked). Internet super-server will be disabled ". I have checked whether xinetd is disabled in services and found disabled so I have enabled it several times even no use I mean it is always showing as disabled.

I am able to browse internet on Windows without any problems but not in opensuse.

Please suggest how to freshly re configure the network so that I can browse internet properly.
↧

TUMBLEWEED Fixing Kmail

December 10, 2017, 11:24 am
$
0
0
For many years I used fetchmail and postfix with their default settings. fetchmail would put incoming mail into /var/spool/mail/karl. Kmail would load data from local mbox file /var/spool/mail/karl and from a local Kmail mail folder at ~/.local/share/local-mail. That worked with Kmail being a standalone application. But Kmail switching to akonadi caused severe annoyances and I already l looked for a replacement of Kmail. Switching from mbox type /var/spool/mail/karl to mail-dir type /home/karl/.local/share/local-mail/ and deleting the mbox account solved the problem:

Code:
erlangen:~ # postconf home_mailbox=.local/share/local-mail/inbox/
erlangen:~ # systemctl restart postfix                                                                                                                                                                                                                                       
erlangen:~ #
↧
Search

LEAP 42.3 Logitech C920 - no sound...

December 10, 2017, 2:36 pm
$
0
0
After living without a microphone input on my computer for a few years, I was shopping for a compatible usb micrphone and realized the WebCam I have has a microphone attached.

After several hours down this rat hole, I need some help. It looks to me like the sound module is not loading for this device.


Code:
$ sudo cat /etc/os-release
NAME="openSUSE Leap"
VERSION="42.3"
ID=opensuse
ID_LIKE="suse"
VERSION_ID="42.3"
PRETTY_NAME="openSUSE Leap 42.3"

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ lsusb |grep Logit
Bus 005 Device 013: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
hwinfo --usb gives:
Code:
16: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: 0Ce3.pvHYR+pXt90
  Parent ID: nzpY.517_uEWzBl2
  SysFS ID: /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb5/5-1/5-1.4/5-1.4.4/5-1.4.4:1.0
  SysFS BusID: 5-1.4.4:1.0
  Hardware Class: unknown
  Model: "Logitech HD Pro Webcam C920"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0x082d "HD Pro Webcam C920"
  Revision: "0.11"
  Serial ID: "589981AF"
  Driver: "uvcvideo"
  Driver Modules: "uvcvideo"
  Device File: /dev/input/event16
  Device Files: /dev/input/event16, /dev/input/by-id/usb-046d_HD_Pro_Webcam_C920_589981AF-event-if00, /dev/input/by-path/pci-0000:04:00.0-usb-0:1.4.4:1.0-event
  Device Number: char 13:80
  Speed: 480 Mbps
  Module Alias: "usb:v046Dp082Dd0011dcEFdsc02dp01ic0Eisc01ip00in00"
  Driver Info #0:
    Driver Status: uvcvideo is active
    Driver Activation Cmd: "modprobe uvcvideo"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #23 (Hub)
pavucontrol tool only shows input from the sound card.

Any help/suggestions would be appreciated...
↧
↧

LEAP 42.3 suse Leap 43.2 - kernel panic on Hyper-V host

December 11, 2017, 12:16 am
$
0
0
I have an issue with Suse LEAP 42.3
Linux vanessa 4.4.76-1-default #1 SMP Fri Jul 14 08:48:13 UTC 2017 (9a2885c) x86_64 x86_64 x86_64 GNU/Linux

Code:
openSUSE 42.3 (x86_64)
VERSION = 42.3
CODENAME = Malachite
Vanessa is a VM under Hyper-V server 2012 R2. I have an issue with VM. It hangs from time to time with kernel panic. Last time happend 7 days ago.
I've tried to detect the reason and it looks like it happens when trying to backup the VM from Hyper-V Host.

This are the last log lines before reboot.

Code:
vanessa:/pg_backup # journalctl | tail -n 800 |more
Dec 10 20:00:57 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:02:35 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:02:39 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:15:01 vanessa cron[21178]: pam_unix(crond:session): session opened for user root by (uid=0)
Dec 10 20:15:01 vanessa systemd[1]: Started Session 19 of user root.
Dec 10 20:15:01 vanessa CRON[21178]: pam_unix(crond:session): session closed for user root
Dec 10 20:17:55 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:18:01 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:20:20 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:20:24 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:23:49 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:23:53 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:23:55 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:23:58 vanessa hv_vss_daemon[835]: Hyper-V VSS: Illegal op:2
Dec 10 20:23:59 vanessa hv_vss_daemon[835]: Hyper-V VSS: VSS: op=FREEZE: succeeded
Dec 10 20:23:59 vanessa kernel: sd 2:0:0:0: [storvsc] Sense Key : Unit Attention [current]
Dec 10 20:23:59 vanessa kernel: sd 2:0:0:0: [storvsc] Add. Sense: Changed operating definition
Dec 10 20:23:59 vanessa kernel: sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automa
Dec 10 20:23:59 vanessa hv_vss_daemon[835]: Hyper-V VSS: VSS: op=THAW: succeeded
Dec 10 20:23:59 vanessa kernel: scsi 4:0:1:0: Direct-Access    Msft    Virtual Disk    1.0  PQ: 0 ANSI: 4
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: Attached scsi generic sg3 type 0
Dec 10 20:23:59 vanessa kernel: scsi 4:0:1:1: Direct-Access    Msft    Virtual Disk    1.0  PQ: 0 ANSI: 4
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] 266338304 512-byte logical blocks: (136 GB/127 GiB)
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] 4096-byte physical blocks
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: Attached scsi generic sg4 type 0
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] Write Protect is off
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] Mode Sense: 00 00 00 00
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] Asking for cache data failed
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Sector size 0 reported, assuming 512.
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] Assuming drive cache: write through
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] 1 512-byte logical blocks: (512 B/512 B)
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] 0-byte physical blocks
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] Sector size 0 reported, assuming 512.
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Write Protect is off
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Mode Sense: 00 00 00 00
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Asking for cache data failed
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Assuming drive cache: write through
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] 1 512-byte logical blocks: (512 B/512 B)
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:0: [sdc] 0-byte physical blocks
Dec 10 20:23:59 vanessa kernel: sd 4:0:1:1: [sdd] Sector size 0 reported, assuming 512.
Dec 10 20:23:59 vanessa kernel: sdc: detected capacity change from 136365211648 to 512
Dec 10 20:23:59 vanessa kernel: ldm_validate_partition_table(): Disk read failed.
Dec 10 20:23:59 vanessa kernel:  sdd: unable to read partition table
Dec 10 20:23:59 vanessa kernel: sdd: partition table beyond EOD, enabling native capacity
Dec 10 20:30:02 vanessa cron[22693]: pam_unix(crond:session): session opened for user root by (uid=0)
Dec 10 20:30:03 vanessa systemd[1]: Started Session 20 of user root.
Dec 10 20:30:04 vanessa CRON[22693]: pam_unix(crond:session): session closed for user root
-- Reboot --
vanessa:/pg_backup #
vanessa:/pg_backup #
vanessa:/pg_backup #
vanessa:/pg_backup # df
Filesystem    1K-blocks    Used Available Use% Mounted on
devtmpfs          495392      0    495392  0% /dev
tmpfs            501820      4    501816  1% /dev/shm
tmpfs            501820    1624    500196  1% /run
tmpfs            501820      0    501820  0% /sys/fs/cgroup
/dev/sda2      129138324 3296200 124775100  3% /
tmpfs            100364      0    100364  0% /run/user/0
/dev/sdb1      515929528  172068 489526728  1% /pg_backup
vanessa:/pg_backup # nano /dev/sd
sda  sda1  sda2  sdb  sdb1
vanessa:/pg_backup # nano /dev/sd
sda  sda1  sda2  sdb  sdb1
vanessa:/pg_backup # nano /dev/sd
Why do i see the /dev/sdd and /dev/sdc. I'dont even have this devices.

Any help? Any idea?
↧

TUMBLEWEED Ghost packages?

December 11, 2017, 1:17 am
$
0
0
I don't know how, but I damaged my system.

Actually, when I start Yast2 package manager module, it complains it have two version of the same packages installed, like cmake, gcab, etc. It asks me, which version to remove, but after selecting one and continue, there's message telling me these packages are not installed. Some packages from the list are on 100% not installed, for example plasma-pk-manager (or something like that).

Additionally, I don't have package updater plasmoid, my task manages under plasma5 not working and there's problem with window managing.
↧

TUMBLEWEED Kmail does not send

December 11, 2017, 5:54 am
$
0
0
Hi all

After the latest updates, it is no longer possible to send an e-mail via kmail. I suspect an SSL problem, because the sending without SSL on port 25 still works fine. Does anyone else know this problem?

Regards
Stephan
↧

LEAP 42.3 Freetype2-32bit

December 11, 2017, 6:44 am
↧
↧

LEAP 42.2 Removable USB Media Mount Problem

December 11, 2017, 8:00 am
$
0
0
Background: I want to store important files from my desktop computer to a micro SD card that will be readable by my Galaxy Tablet for when I travel. I bought a 64gb MicroSD that is compatible with the Tablet and a USB card reader/writer that will connect to my computer.

Problem: After working for a short time, Dolphin now gives the following error message when I try to access the microSD on my desktop computer:

Quote:
An error occurred while accessing '59.5 GiB Removable Media', the system responded: The requested operation has failed: Error mounting system-managed device /dev/sdb1: Command-line `mount "/tmp"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
Question: What do I need to do to correct this error?
↧

TUMBLEWEED No sound from sound card 0 in two card setup

December 11, 2017, 9:25 am
$
0
0
For quite some time have not been able to use the mic on a Logitech web camera, apparently could not be found. I put this down to the beta version of skype.

The system has two (2) sound cards, 0 on motherboard and 1 on video card

Configuring the sound card in Yast it appears that whenever either sound card is configured as sound card 0 it does not work, no sound, no volume configuration menu. At the same time sound card 1 works, plays a sound but still no mic.

It would seem that this is a software issue as both cards play o.k. when configured as sound card 1 but the mic is not recognized. Video camera works o.k.

Not being able to find the mic was also a problem in 42.3 but did not track it down so far, attributed it to skype beta.
↧
Search

TUMBLEWEED PCIe Bus error during boot

December 11, 2017, 10:35 am
$
0
0
Hello,

As I mentioned in my previous posts, I've seen many Intel-related errors and possible bugs for kernel 4.14. Sometimes the system hanged at boot time after I did a *zypper dup* then reboot. One of the errors is like this:
Code:
~ $ dmesg | grep Error
[    0.044709] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210)
[    0.048721] ACPI Error: 1 table load failures, 12 successful (20170728/tbxfload-246)
[    1.801996] RAS: Correctable Errors collector initialized.
[  328.053721] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[  351.383378] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[  382.382643] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[  387.739581] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[  387.739600] nvme 0000:04:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0400(Receiver ID)
[  387.739602] nvme 0000:04:00.0:    [ 0] Receiver Error        (First)
[  387.821726] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
I'm having a difficult time understanding what this *PCIe Bus Error* is. It never appeared before I upgraded to 4.14.2 on Nov 30 or so. What is this and how to fix it? I guess I can ignore the ACPI error above. Correct me if I'm wrong.

And, btw, when will kernel 4.15 be arriving in Tumbleweed? I won't do another *zypper dup* again until 4.15 is here.

Thank you very much.
↧

OTHER VERSION Docker image for SLES 11 SP4?

December 11, 2017, 12:05 pm
↧
↧

TUMBLEWEED VLC Player Doesn't Support Some Codecs (I Guess)

December 11, 2017, 12:29 pm
$
0
0
When I first installed it it said "VLC is not supposed to be run as root. Sorry. If you need to use real-time priorities and/or privileged TCP ports you can use vlc-wrapper (make sure it is Set-UID root and cannot be run by non-trusted users first)."

Then I wrote
Code:
sed -i 's/geteuid/getppid/' /usr/bin/vlc
to terminal and it launched. But now I got these errors.

Code:
Codec not supported:
 VLC could not decode the format "h264" (H264 - MPEG-4 AVC (part 10))
 Codec not supported:
 VLC could not decode the format "mp4a" (MPEG AAC Audio)
 
I don't know what to do how can I solve it?
↧

LEAP 42.3 T61 problem connecting wifi to home router

December 11, 2017, 3:47 pm
$
0
0
This ThinkPad T61 dual-boots openSUSE Leap 42.3 and Windows 10. For wifi, it uses its internal intel 4965 adapter, or a Belkin USB adapter.
In Leap, the intel wifi connects to our building network correctly, but has problems conecting to our home router. It connects to home only right after a boot, but will not connect after the computer sleeps and wakes. Also in Leap, the USB adapter always connects to both networks correctly, even after system sleep.
In Windows, both adapters always connect to both networks correctly, even after system sleep.
Hardware info is
Code:
howard@T61oS423:~> sudo /usr/sbin/hwinfo --wlan
[sudo] password for root:
23: PCI 300.0: 0282 WLAN controller                           
  [Created at pci.378]
  Unique ID: y9sn.tEff+dB1XD9
  Parent ID: qTvu.czCARouY8b4
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
  SysFS BusID: 0000:03:00.0
  Hardware Class: network
  Model: "Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x4230 "PRO/Wireless 4965 AG or AGN [Kedron] Network Connection"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1010
  Revision: 0x61
  Driver: "iwl4965"
  Driver Modules: "iwl4965"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xdf3fe000-0xdf3fffff (rw,non-prefetchable)
  IRQ: 32 (no events)
  HW Address: 00:1f:3b:8b:89:4b
  Permanent HW Address: 00:1f:3b:8b:89:4b
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.745 5.765 5.785 5.805 5.825
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d00004230sv00008086sd00001010bc02sc80i00"
  Driver Info #0:
    Driver Status: iwl4965 is active                                                                                                                                             
    Driver Activation Cmd: "modprobe iwl4965"                                                                                                                                     
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                                                       
  Attached to: #10 (PCI bridge)                                                                                                                                                   
                                                                                                                                                                                 
34: USB 00.0: 0282 WLAN controller                                                                                                                                               
  [Created at usb.122]                                                                                                                                                           
  Unique ID: 2jVo.qgkBEPGscT7                                                                                                                                                     
  Parent ID: BSFT.9T1GDCLyFd9                                                                                                                                                     
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0                                                                                                                     
  SysFS BusID: 7-2:1.0                                                                                                                                                           
  Hardware Class: network                                                                                                                                                         
  Model: "Belkin F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU]"                                                                                                       
  Hotplug: USB                                                                                                                                                                   
  Vendor: usb 0x050d "Belkin Components"                                                                                                                                         
  Device: usb 0x110a "F9L1101v2 802.11abgn Wireless Adapter [Realtek RTL8192DU]"                                                                                                 
  Serial ID: "00e04c000001"                                                                                                                                                       
  Driver: "rtl8192du"                                                                                                                                                             
  Driver Modules: "8192du"
  Device File: wlan1
  Features: WLAN
  Speed: 480 Mbps
  HW Address: 94:10:3e:6a:fa:59
  Permanent HW Address: 94:10:3e:6a:fa:59
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 149 153 157 161 165
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.745 5.765 5.785 5.805 5.825
  WLAN bitrates: 1 2 5.5 11
  WLAN encryption modes: TKIP CCMP
  WLAN authentication modes: open wpa-psk wpa-eap
  Module Alias: "usb:v050Dp110Ad0000dc00dsc00dp00icFFiscFFipFFin00"
  Driver Info #0:
    Driver Status: 8192du is active
    Driver Activation Cmd: "modprobe 8192du"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #33 (Hub)
howard@T61oS423:~>
iwconfig output when using the Belkin adapter is
Code:
howard@T61oS423:~> sudo iwconfig
[sudo] password for root:
tun0      no wireless extensions.

lo        no wireless extensions.

wlan1    IEEE 802.11an  ESSID:"howardcathy_AN5"  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency:5.765 GHz  Access Point: B0:C7:45:75:5A:31 
          Bit Rate:130 Mb/s  Sensitivity:0/0 
          Retry:off  RTS thr:off  Fragment thr:off
          Encryption key:****-****-****-****-****-****-****-****  Security mode:open
          Power Management:off
          Link Quality=100/100  Signal level=80/100  Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0  Missed beacon:0

wlan0    IEEE 802.11abgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated  Tx-Power=14 dBm 
          Retry short limit:7  RTS thr:off  Fragment thr:off
          Encryption key:off
          Power Management:off
         
eth0      no wireless extensions.

howard@T61oS423:~>
Journal entries from failed attempt to use the intel adapter to connect to the home router are at https://paste.opensuse.org/21992764

It never gets to
Code:
associating -> 4-way handshake
that happens when successfully connecting to one of the networks.
Any ideas what needs to change to get the internal intel adapter to consistently connect to the home router?
Thanks,
Howard
↧

LEAP 42.3 Dolphin equivalent of Konqueror's "preview in embedded viewer"?

December 11, 2017, 4:28 pm
$
0
0
After an upgrade to Leap 42.3 (from 42.2), the left sidebar navigation panel in Konqueror is gone.

A search on the forum led me to https://forums.opensuse.org/showthre...queror-sidebar which indicates that that functionality has been dropped. :( This means that Konqueror is no longer productive for me.

One thing I used quite often in Konqueror was it's context-sensitive "Preview in embedded viewer" option. Turning on Preview for an entire directory is, to me, both silly from a performance perspective and virtually useless since the previews on text files, for example, are too small and limited.

So, the question is, how can I get similar "Preview in embedded viewer" functionality in Dolphin? Is it possible?
↧
Viewing all 40713 articles
Browse latest View live
Search