Quantcast
Channel: openSUSE Forums
Viewing all 40713 articles
Browse latest View live
↧

TUMBLEWEED certificate installed with java keytool gone after reboot

November 5, 2018, 10:35 am
$
0
0
Hi all,

I'm trying to find out why my certificate imported to the java keystore (openjdk 1.8) is gone after every reboot. I'm importing it with the command line

Code:
cd $JAVA_HOME && sudo bin/keytool -import -v -trustcacerts -alias artifactory -file /path/to/mycert.p7c -keystore $JAVA_HOME/jre/lib/security/cacerts -keypass changeit -storepass changeit
I'm on the latest tumbleweed version. Anybody with an idea? Is there some magic that restores my jdk packages to the original state?

Thanks and greetings,
Kurt
↧
Search

LEAP 15 Fresh install, ffpeg conflict

November 5, 2018, 11:16 am
$
0
0
Performed a fresh install of Leap 15.0, and pursued the multilmedia updates (aka: Packman) found in http://opensuse-guide.org/codecs.php.

Results:
Code:
linux-4w76:~ # zypper install ffmpeg lame gstreamer-plugins-bad gstreamer-plugins-ugly gstreamer-plugins-ugly-orig-addon gstreamer-plugins-libav libdvdcss2 vlc-codecs
Loading repository data...
Reading installed packages...
'lame' is already installed.
No update candidate for 'lame-3.100-lp150.1.5.x86_64'. The highest available version is already installed.
Resolving package dependencies...

Problem: ffmpeg-3.4.2-lp150.2.1.x86_64 requires libavcodec57 = 3.4.2-lp150.2.1, but this requirement cannot be provided
  not installable providers: libavcodec57-3.4.2-lp150.2.1.x86_64[openSUSE-Leap-15.0-1]
                  libavcodec57-3.4.2-lp150.2.1.x86_64[repo-oss]
 Solution 1: Following actions will be done:
  do not install gstreamer-plugins-libav-1.12.5-lp150.3.3.x86_64
  do not install vlc-codecs-3.0.2-lp150.3.5.x86_64
  downgrade of libavcodec57-3.4.4-lp150.9.4.x86_64 to libavcodec57-3.4.2-lp150.2.1.x86_64
  install libavcodec57-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libavformat57-3.4.4-lp150.9.4.x86_64 to libavformat57-3.4.2-lp150.2.1.x86_64
  install libavformat57-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libavfilter6-3.4.4-lp150.9.4.x86_64 to libavfilter6-3.4.2-lp150.2.1.x86_64
  install libavfilter6-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libavdevice57-3.4.4-lp150.9.4.x86_64 to libavdevice57-3.4.2-lp150.2.1.x86_64
  install libavdevice57-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libavresample3-3.4.4-lp150.9.4.x86_64 to libavresample3-3.4.2-lp150.2.1.x86_64
  install libavresample3-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libavutil55-3.4.4-lp150.9.4.x86_64 to libavutil55-3.4.2-lp150.2.1.x86_64
  install libavutil55-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libswscale4-3.4.4-lp150.9.4.x86_64 to libswscale4-3.4.2-lp150.2.1.x86_64
  install libswscale4-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libswresample2-3.4.4-lp150.9.4.x86_64 to libswresample2-3.4.2-lp150.2.1.x86_64
  install libswresample2-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
  downgrade of libpostproc54-3.4.4-lp150.9.4.x86_64 to libpostproc54-3.4.2-lp150.2.1.x86_64
  install libpostproc54-3.4.2-lp150.2.1.x86_64 (with vendor change)
    http://packman.links2linux.de  -->  openSUSE
 Solution 2: do not install ffmpeg-3.4.2-lp150.2.1.x86_64
 Solution 3: break ffmpeg-3.4.2-lp150.2.1.x86_64 by ignoring some of its dependencies

Choose from above solutions by number or cancel [1/2/3/c] (c): 2
Resolving dependencies...
Resolving package dependencies...

The following 65 NEW packages are going to be installed:
  gimp-plugin-aa gstreamer-plugins-bad gstreamer-plugins-bad-lang gstreamer-plugins-libav
  gstreamer-plugins-ugly gstreamer-plugins-ugly-lang gstreamer-plugins-ugly-orig-addon
  libSDL_image-1_2-0 libSoundTouch0 liba52-0 libaa1 libavc1394-0 libbs2b0 libcaca0
  libcddb2 libchromaprint1 libdca0 libdvbpsi10 libdvdcss2 libdvdnav4 libebml4 libfaad2
  libftgl2 libgme0 libgraphene-1_0-0 libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0
  libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0
  libgstcodecparsers-1_0-0 libgstmpegts-1_0-0 libgsturidownloader-1_0-0
  libgstwayland-1_0-0 liblilv-0-0 liblrdf2 libmatroska6 libmms0 libmodplug1 libmpeg2-0
  libmpg123-0 libofa0 libopencore-amrnb0 libopencore-amrwb0 libopenmpt0 libprojectM-qt5-2
  libprotobuf-lite15 libschroedinger-1_0-0 libserd-0-0 libshout3 libsord-0-0 libspandsp2
  libsratom-0-0 libsrtp1 libtheora0 libupnp6 libva-wayland2 libvlc5 libvlccore9 libzbar0
  vlc vlc-codec-gstreamer vlc-codecs vlc-noX vlc-qt

65 new packages to install.
Overall download size: 13.3 MiB. Already cached: 0 B. After the operation, additional
37.3 MiB will be used.
Continue? [y/n/...? shows all options] (y): y
Selecting option #2 allowed almost all of the updates, EXCEPT ffmpeg.

Attempting to install ffmpeg (3.4.2-lp150.2.1) requires the downgrade of 27 packages. Should the downgrade be performed to install ffmpeg, or is there an alternative?
↧
↧

LEAP 42.3 Cannot Install RPM package - no signature?

November 5, 2018, 11:21 am
$
0
0
I am trying to install the latest version of LuckyBackup on my KDE Desktop. There is an rpm for openSuSE Leap 42.3 so I tried to run it with the installer. I get the following error message:-

Code:
Error: INVALID:luckybackup-0.5.0-29.1.x86_64 (file-e3437bce): Signature verification failed [4-Signatures public key is not available]
    Header V3 DSA/SHA1 Signature, key ID 1f94d5b1: NOKEY
    Header SHA1 digest: OK (0c85aae81b1f5b624f3064994a247940f59d6c72)
    MD5 digest: OK (2a7dc4612734e7686471b3c2870824c8)
    V3 DSA/SHA1 Signature, key ID 1f94d5b1: NOKEY
There is a newer rpm.md5 file with later date but cannot see how to use it. Both the rpm file and the rpm.md5 files have SHA1 and MD5 text shown if I open the i button on the SourceForge Luckybackup web page but cannot get any means of installation to work.
Any ideas how I should fix this?
↧

LEAP 15 Update from Leap 42.3 to 15.0: No login

November 5, 2018, 11:58 am
$
0
0
I have updated my laptop from Leap 42.3 to Leap 15.0. The installation process worked fine until I reboot. Now I just have a black screen with a mousepointer, Can't get the GUI-login.

I enter Ctrl+Alt+F1 to switch to a console screen. I can login as root and also as an user.
As root when I type startx I get:

/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
Trying to start a default input method for the locale fr_FR.UTF-8 ...
Checking for a default input method in /etc/X11/xim.d/fr/
sourcing /etc/X11/xim.d/fr/40-ibus ...
/etc/X11/xim.d/fr/40-ibus started sucessfully

When I type startkde I get (even when I set DISPLAY=0):
$DISPLAY is not set or cannot connect to the X server.

The xsession-errors shows:
Qt: Dead lock detected while activating a BlockingQueuedConnection: Sender is QObject(0x21a2080), receiver is QDBusConnectionPrivate(0x7fcf980030f0)
Unexpected response from KInit (response = 0).
startkde: Could not start ksmserver. Check your installation.
The X11 connection broke (error 1). Did the X11 server die?
Closing SQL connection: "kactivities_db_resources_140248847955840_readwrite"
The X11 connection broke: I/O error (code 1)
XIO: fatal IO error 13 (Permission denied) on X server ":0"
after 1563 requests (1492 known processed) with 0 events remaining.
Error: Can't open display: :0
Could not connect to D-Bus server: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-D0i6LjU9SJ: Connection refused
startkde: Shutting down...
kdeinit5_wrapper: Warning: connect(/run/user/0/kdeinit5__0) failed: : No such file or directory
Error: Can not contact kdeinit5!
xprop: unable to open display ':0'
xprop: unable to open display ':0'
startkde: Done.
Failed enumerating UDisks2 objects: "org.freedesktop.DBus.Error.TimedOut"
"Activation of org.freedesktop.UDisks2 timed out"
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QThread: Destroyed while thread is still running
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
The X11 connection broke: I/O error (code 1)
XIO: fatal IO error 2 (No such file or directory) on X server ":0"
after 198 requests (198 known processed) with 0 events remaining.

Any help would be apreciated.

Mathos
↧

Two CC books on word processing (LibreOffice Writer and LyX)

November 5, 2018, 1:02 pm
$
0
0
To Tame a Writer, LibreOffice Writer for Writers

is a CC text that explains how to get the most out of the LibreOffice Writer word processor (with a few pages dedicated to Draw, Math and Chart).

This book is a translation of an earlier book in Spanish called “Domando al escritor” which has a long history, its first incarnation being a series of articles dating back to 2006.

This edition is centred in LibreOffice 6.1, presenting also some of the new features that version 6.2 will give us in early 2019.


LyX, The Other Way of Writing

The book is an “updated translation” of a book I wrote in Spanish in 2017.


LYX, The Other Way of Writing explores how to use LYX to get the most out of LATEX, XƎTEX, and OpenType, presenting the tools and methods to get a perfect PDF with our work, with all the beauty that only this system can provide.
↧
↧

TUMBLEWEED Optirun not working after updating drivers to 410.73

November 5, 2018, 1:29 pm
$
0
0
Hello!
So I'd got my laptop with bumblebee running correctly untill I updated the drivers to 410.73.
I reinstalled everything following the steps from https://en.opensuse.org/SDB:NVIDIA_Bumblebee but nothing, I keep getting the same error:

optirun -vv --status
Code:
[ 1739.036498] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1739.036969] [INFO]Configured driver: nvidia
[ 1739.037236] [DEBUG]optirun version 3.2.1 starting...
[ 1739.037255] [DEBUG]Active configuration:
[ 1739.037263] [DEBUG] bumblebeed config file: /etc/bumblebee/bum
blebee.conf
[ 1739.037284] [DEBUG] X display: :8
[ 1739.037303] [DEBUG] LD_LIBRARY_PATH: /usr/lib64/nvidia:/usr/li
b/nvidia
[ 1739.037319] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1739.037338] [DEBUG] Accel/display bridge: auto
[ 1739.037357] [DEBUG] VGL Compression: proxy
[ 1739.037375] [DEBUG] VGLrun extra options: 
[ 1739.037394] [DEBUG] Primus LD Path: /usr/lib64/primus:/usr/lib
/primus
Bumblebee status: Error (3.2.1): Could not load GPU driver

[ 1739.037496] [DEBUG]Socket closed.
[ 1739.037542] [DEBUG]Killing all remaining processes.
when I initialize bumblebee manually and run optirun --status everything seems fine but as soon as I try to run another program it gives me the same error as above.
Code:
bumblebeed &
[1] 6567
[INFO]bumblebeed 3.2.1 started
optirun --status
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.
this is the message I get from dmesg (just the nvidia part):
Code:
[  348.915669] NVRM: The NVIDIA GeForce 820M GPU installed in this system is
              NVRM:  supported through the NVIDIA 390.xx Legacy drivers. Please
              NVRM:  visit http://www.nvidia.com/object/unix.html for more
              NVRM:  information.  The 410.73 NVIDIA driver will ignore
              NVRM:  this GPU.  Continuing probe...
[  348.915672] NVRM: No NVIDIA graphics adapter found!
But in the official page it's indicated that I should install the ones that I now have installed.

Additional information:
Code:
zypper se -si nvidia
E  | Nombre                | Tipo    | Versión    | Arquitectura | Repositorio 
---+------------------------+---------+------------+--------------+--------------
i+ | nvidia-bumblebee      | paquete | 410.73-3.1 | x86_64      | X11:Bumblebee
i+ | nvidia-bumblebee-32bit | paquete | 410.73-3.1 | x86_64      | X11:Bumblebee

/usr/sbin/hwinfo --gfxcard
Code:
22: PCI 400.0: 0302 3D controller                               
  [Created at pci.378]
  Unique ID: YmUS.to0YcCI0RU8
  Parent ID: QSNP.Iil9uxQnin3
  SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0
  SysFS BusID: 0000:04:00.0
  Hardware Class: graphics card
  Model: "ASUSTeK GeForce 820M"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x1140 "GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M]"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x16cd "GeForce 820M"
  Revision: 0xa1
  Memory Range: 0xf6000000-0xf6ffffff (rw,non-prefetchable)
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf1ffffff (ro,non-prefetchable)
  I/O Ports: 0xd000-0xdfff (rw)
  Memory Range: 0xf7000000-0xf707ffff (ro,non-prefetchable,disabled)
  IRQ: 16 (no events)
  Module Alias: "pci:v000010DEd00001140sv00001043sd000016CDbc03sc02i00"
  Driver Info #0:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #1:
    Driver Status: nvidia_drm is not active
    Driver Activation Cmd: "modprobe nvidia_drm"
  Driver Info #2:
    Driver Status: nvidia is not active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (PCI bridge)

23: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.378]
  Unique ID: _Znp.kIE82J1vmu0
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel Haswell-ULT Integrated Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x0a16 "Haswell-ULT Integrated Graphics Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x16cd 
  Revision: 0x0b
  Driver: "i915"
  Driver Modules: "i915"
  Memory Range: 0xf7400000-0xf77fffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  I/O Ports: 0xf000-0xf03f (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 46 (98677 events)
  Module Alias: "pci:v00008086d00000A16sv00001043sd000016CDbc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

Primary display adapter: #23

cat /usr/lib/os-release
Code:

NAME="openSUSE Tumbleweed"
# VERSION="20181029"
ID="opensuse-tumbleweed"
ID_LIKE="opensuse suse"
VERSION_ID="20181029"
PRETTY_NAME="openSUSE Tumbleweed"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:tumbleweed:20181029"
BUG_REPORT_URL="https://bugs.opensuse.org"
HOME_URL="https://www.opensuse.org/"
cat /etc/bumblebee/bumblebee.conf
Code:
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib64/primus:/usr/lib/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#        bbswitch - new in BB 3, recommended if available
#      switcheroo - vga_switcheroo method, use at your own risk
#            none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib64/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib64/nvidia/xorg/,/usr/lib64/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

I'm quite noob in linux.. and I don't know what to do, I've tried everything in the forums.
Sorry for my english!
↧

TUMBLEWEED How to install directly into a subvolume

November 5, 2018, 3:30 pm
$
0
0
hello guys, i have been trying to install opensuse directly in a subvolume but havent really been able. Is there any way to do it? As i have other OS's installed on teh disk. I cannot take the normal approach for the installation.
thank you
↧

TUMBLEWEED Cannot get Tizonia....a snap command line music player to work

November 5, 2018, 7:06 pm
$
0
0
Was wondering if someone could help me troubleshoot why I cannot get Tizonia to work on tumbleweed.

I have successfully installed snapd using YAST
snapd version: 2.34.3-5.8

I have successfully installed tizonia as a snap file

sudo snap list
Code:
 
Name    Version                Rev  Tracking  Publisher  Notes
core    16-2.36+git992.417cfc6  5867  edge      canonical  core
tizonia  0.15.0                  211  stable    tizonia    -
uname -a
Code:
Linux linux-6sxo 4.18.15-1-pae #1 SMP PREEMPT Thu Oct 18 08:56:17 UTC 2018 (5a53676) i686 i686 i386 GNU/Linux
here is the error message I get when I try to start tizonia
Code:
tizonia --youtube-audio-search "bruce springsteen born to run"                       
cannot perform readlinkat() on the mount namespace file descriptor of the init process: Permission denied
the snapd daemon is running....as I have set snapd daemon to start at system boot

systemctl status snapd

Code:
● snapd.service - Snappy daemon
  Loaded: loaded (/usr/lib/systemd/system/snapd.service; enabled; vendor preset: disabled)
  Active: active (running) since Sun 2018-11-04 23:16:55 MST; 20h ago
 Main PID: 1110 (snapd)
    Tasks: 10 (limit: 4783)
  CGroup: /system.slice/snapd.service
          └─1110 /usr/lib/snapd/snapd
Thanks in advance for any help that can be provided....
↧
Search

LEAP 15 Frequent display freezes with nouveau after update to Leap 15.0

November 5, 2018, 9:43 pm
$
0
0
I recently upgraded to Leap 15.0 from Leap 42.3, using the GNOME shell. With Leap 42.3, I would occasionally have graphics freezes by nouveau, but only when playing h264 video:

Code:
[  ###.######] nouveau 0000:01:00.0: DRM: GPU lockup - switching to software fbcon
But now, with Leap 15.0, nouveau is crashing (and thus freezing the display) much more frequently. As I understand it, the move to Wayland from Xorg is the largest different between 15.0 and 42.3, so I would assume the problem lies between nouveau and Wayland. Running GNOME on Wayland, I hit crashes within minutes, but even running GNOME on Xorg (understanding that Wayland is emulating Xorg with XWayland), I am hitting these display freezes almost daily. And, though I can access the system through ssh and other means, I cannot restore the display without a hard reset of the machine.

Occasionally, I will be able to enter the system's console (Ctrl+Alt+F1), mainly if I manage to kill the display-manager service and see many lines similar to the following in dmesg:
Code:
nouveau 0000:01:00.0: fifo: INTR 00800000
nouveau 0000:01:00.0: fifo: INTR 01000000: 00000005
nouveau 0000:01:00.0: fifo: INTR 01000000: 00000005
nouveau 0000:01:00.0: fifo: INTR 01000000: 00000005
nouveau 0000:01:00.0: fifo: INTR 01000000: 00000005
nouveau 0000:01:00.0: Failed to idle channel 2.
On multiple occasions, I have hit this error by opening a new tab in Firefox and entering an address, and then quickly using Alt+Tab to switch to a different application while I was for the Firefox tab to load. But, the display will freeze with the Alt+Tab panel on the screen.

As I search for solutions, I see Fedora bug reports matching my symptoms marked as closed, and feel a sense of hope until I see that they seem to ignore problems until they can close the bugs due to version End-of-Life (like this one that seems to match my experience to a T).

I would really prefer to use Open-Source drivers and not venture into the nVidia proprietary drivers for my card, so I'm really hoping I can fix this error.

Code:
# lspci -nnk | grep -Ei -A 3 'vga|3d|display'
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119M [NVS 4200M] [10de:1056] (rev a1)
        Subsystem: Dell Device [1028:0494]
        Kernel driver in use: nouveau
        Kernel modules: nouveau
↧
↧

TUMBLEWEED BCM43142 - cannot configure interface

November 5, 2018, 10:02 pm
$
0
0
Hi,
I have a problem with configuring WiFi on my Lenovo laptop with the Broadcom BCM43142 network adapter. I've installed various Linux systems on it many times and there have never been any problems with configuring WiFi. I tried both using Network- and Wicked-Manager.
I tried to install various drivers. From the packman repository, from the community packages on https://software.opensuse.org/package/broadcom-wl. Different variants, dozens of rebooted comp and I can not configure this interface.
Also used /usr/sbin/install_bcm43xx_firmware script but wont help - "Sorry, the input file is either wrong or not supported by b43-fwcutter."

Some logs:
Code:
~> uname -a
Linux opensuse 4.18.15-1-default #1 SMP PREEMPT Thu Oct 18 08:56:17 UTC 2018 (5a53676) x86_64 x86_64 x86_64 GNU/Linux
Code:
~> sudo zypper search broadcom-wl

S  | Name                              | Summary                            | Type     
---+-----------------------------------+------------------------------------+-----------
i+ | broadcom-wl                      | Wireless driver for Broadcom 43x-> | package     
i+ | broadcom-wl-kmp-default          | Wireless driver for Broadcom 43x-> | package
Code:
~> /usr/sbin/iwconfig
lo        no wireless extensions.

wlp8s0    IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated 
          Retry short limit:7  RTS thr:off  Fragment thr:off
          Power Management:off
         
enp9s0    no wireless extensions.
Does anyone know how to solve this problem?
↧

LEAP 15 Need to uninstall a package with all its dependencies.

November 5, 2018, 10:05 pm
$
0
0
Hi,

I am using Leap 15. By mistake installed Firejail from the tumbleweed repos,

Now I want to uninstall Firejail with all its dependencies which it had pulled from

the tumbleweed repos.

Whats the command ?
↧

LEAP 15 No display from HDMI

November 5, 2018, 11:19 pm
$
0
0
I have two monitors.
They were just working fine but suddenly HDMI one is just black now.
If I connect the HDMI monitor via VGA it works fine.

This happened before and I was only able to solve the problem by reinstalling OS.
Even changing the motherboard didn't solve the problem.

Code:
~> xrandr --listmonitors 
Monitors: 2
 0: +*HDMI-2 1920/480x1080/270+1080+120  HDMI-2
 1: +VGA-1 1080/477x1920/268+0+0  VGA-1

~> xrandr --listproviders 
Providers: number : 1
Provider 0: id: 0x47; cap: 0xf (Source Output, Sink Output, Source Offload, Sink Offload); crtcs: 3; outputs: 5; associated providers: 0; name: modesetting
    output VGA-1
    output HDMI-1
    output DP-1
    output HDMI-2
    output DP-2

~> lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)


I can provide more outputs.
↧

TUMBLEWEED Running Tumbleweed on HP Laptop 15-da0xxx

November 6, 2018, 12:52 am
$
0
0
Installed Tumbleweed 20181029 on budget hardware:

Code:
notebook:~ # inxi -zF
System:    Host: notebook.fritz.box Kernel: 4.19.1-1.g91bc4a9-default x86_64 bits: 64 Console: tty 0
          Distro: openSUSE Tumbleweed 20181029
Machine:  Type: Laptop System: HP product: HP Laptop 15-da0xxx v: Type1ProductConfigId serial: <filter>
          Mobo: HP model: 84A6 v: 80.24 serial: <filter> UEFI: Insyde v: F.02 date: 05/24/2018
Battery:  ID-1: BAT1 charge: 15.0 Wh condition: 40.1/41.9 Wh (96%)
CPU:      Topology: Quad Core model: Intel Core i5-8250U bits: 64 type: MT MCP L2 cache: 6144 KiB
          Speed: 800 MHz min/max: 400/3400 MHz Core speeds (MHz): 1: 792 2: 800 3: 796 4: 794 5: 794 6: 800 7: 789 8: 796
Graphics:  Device-1: Intel UHD Graphics 620 driver: i915 v: kernel
          Display: server: X.org 1.20.2 driver: modesetting unloaded: fbdev,vesa resolution: <xdpyinfo missing>
          OpenGL: renderer: Mesa DRI Intel UHD Graphics 620 (Kabylake GT2) v: 4.5 Mesa 18.1.7
Audio:    Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
          Sound Server: ALSA v: k4.19.1-1.g91bc4a9-default
Network:  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
          IF: eno1 state: down mac: <filter>
          Device-2: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter driver: rtl8821ce
          IF: wlo1 state: up mac: <filter>
Drives:    Local Storage: total: 238.47 GiB used: 164.24 GiB (68.9%)
          ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG30ZMV256G size: 238.47 GiB
RAID:      Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
Partition: ID-1: / size: 29.40 GiB used: 5.54 GiB (18.8%) fs: ext4 dev: /dev/nvme0n1p2
          ID-2: /home size: 200.17 GiB used: 158.70 GiB (79.3%) fs: ext4 dev: /dev/nvme0n1p3
          ID-3: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p4
Sensors:  System Temperatures: cpu: 37.0 C mobo: N/A
          Fan Speeds (RPM): N/A
Info:      Processes: 206 Uptime: 1h 58m Memory: 7.70 GiB used: 1.39 GiB (18.1%) Shell: bash inxi: 3.0.27
notebook:~ #
The installation was smooth. WLAN requires kernel-default version 4.19 and rtl8821ce-kmp-default available at https://software.opensuse.org/packag...ce-kmp-default

Installed packages are:

Code:
notebook:~ # zypper packages --installed-only --repo Kernel:stable home:Sauerland
Loading repository data...
Reading installed packages...
S  | Repository    | Name                  | Version                            | Arch 
---+----------------+-----------------------+-------------------------------------+-------
i+ | Kernel:stable  | kernel-default        | 4.19.1-1.1.g91bc4a9                | x86_64
v  | Kernel:stable  | kernel-default        | 4.19.1-1.1.g91bc4a9                | i586 
i+ | home:Sauerland | rtl8821ce-kmp-default | git20180902_k4.19.1_1.g91bc4a9-27.8 | x86_64
notebook:~ #
Performance compares well with desktop machines.

UEFI is fast and startup times are very reasonable:

Code:
notebook:~ # systemd-analyze
Startup finished in 6.434s (firmware) + 3.071s (loader) + 4.032s (kernel) + 1.938s (initrd) + 4.042s (userspace) = 19.519s
graphical.target reached after 4.019s in userspace
notebook:~ #
Disk performance:

Code:
notebook:~ # hdparm -tT /dev/nvme0n1

/dev/nvme0n1:
 Timing cached reads:  25756 MB in  1.99 seconds = 12972.09 MB/sec
 Timing buffered disk reads: 2090 MB in  3.00 seconds = 695.79 MB/sec
notebook:~ #
The cpu is fast and has low power consumption: https://www.cpubenchmark.net/cpu.php....60GHz&id=3042
↧
↧

LEAP 42.3 wlan0 / NO ACCSESS / SECRETS REQUIRES

November 6, 2018, 3:19 am
$
0
0
I am desperately trying to get access to the local WIFI network, it fails with the message
"(wlan0): Activation: (wifi) access point 'AltiboxXXXXX' has security, but secrets are required"

Since there are secrets missing, I suppose it may relate to KWallet, which is not installed.
However, what kind of secrets are referenced is a secret to me.

I would also like to mention that my cable connection works (but is two floors away from my office).

Suggestions are very welcome.
Jan Christian

↧

LEAP 15 wine-doors won't install

November 6, 2018, 9:13 am
$
0
0
I tried to install wine-doors on Leap 15 from the Emulators repo. It tells me it needs gnome-python-desktop and can't find it. I see a version for Leap 42, but noting for 15. What's the deal?
↧
Search

Marvell, TUXEDO Computers Sponsor openSUSE Project

November 6, 2018, 9:20 am
$
0
0
Two companies were recently added to the openSUSE Sponsors page thanks to the companies generous donations to the openSUSE Project. Both Marvell and TUXEDO Computers have provided tangible support through donations to openSUSE to promote the use and development of Linux. “We are thoroughly pleased to have Marvell and TUXEDO Computers as sponsors of the […]

More...
↧

LEAP 42.3 OBS-studio warning: [FFmpeg aac encoder: 'simple_aac'] (Solved)

November 6, 2018, 11:08 am
$
0
0
When you install OBS-Studio from Packman repo (or other home repo) it will fail to encode if you already had ffmeg installed from the default OpenSUSE repository.
By default it will not force the installation of ffmpeg from Packaman.

You see an error, in OBS-studio, telling you to check your codec and the log file (see in ~/.config/obs/log/)

The issue:
OpenSUSE default repo provides an ffmpeg (version 3) which has been compiled without acc support what is expected by OBS-studio in it's default setting.

The Solution:
1) remove ffmpeg (either with yast or zypper)
2) install the package named ffmpeg-3
ffmpeg-3 is the correct package name in Packman repo. It will install the same tools as the default ffmpeg, BUT with acc support.

After the change, is you check which Codecs are active in ffmpeg you will see that acc has now ED option (Encode/Decode) before it does not show the option DE

---------- console output ----------

ffmpeg -codecs |grep aac
ffmpeg version 3.4.4 Copyright (c) 2000-2018 the FFmpeg developers
...
...
DEA.L. aac AAC (Advanced Audio Coding) (decoders: aac aac_fixed libfdk_aac ) (encoders: aac libfdk_aac )
D.A.L. aac_latm AAC LATM (Advanced Audio Coding LATM syntax)
↧
↧

LEAP 15 [active directory] join computer to windows domain troubleshoot

November 6, 2018, 12:38 pm
$
0
0
Greetings !!

With my students we try to fix connections issues related to windows server domain based on windows server 2012 (if I'm right, maybe 2016).
I have no administration rights on the server, I communicate with the colleague which is the admin but we can not understand deeply how we could fix the situation.

First point: the physical network.

There is twelve windows 7 computers which the half could not join the domain (The Trust Relationship Between this Workstation and the Primary Domain Failed).

We tried to configure each computers in order to leave the domain and join the domain, as the administrator is not often physically at school :{
Do we execute Newsid.exe still on Windows 7 computers ?

Notices: the physical local network is described as four hubs (? it is too much -- the network admin agreed we must reduce the number of hubs).

We have no difficulties to gain local Administrator rights on each computer (with two exceptions we gonna see thursday if we could enable F8 drop at boot for those two computers).

Second point: the Domain

The half of the computers of this class can not join the domain that must be STMARTIN.

I first thought that joining the domain is about computers and not domain users with rights to join domain, this because those computers joined the domain before being kicked out with "trust relationship...".
We checked with the net admin and all the computers from this class are granted to join the domain.

Clues: I will try thursday to check for PowerShell on those computers to help us deal with AD and this devilish Windows Server.

Questions:

1. Is there a better way than unjoin/join domain in this case ?
2. Could we use Linux system to check/troubleshoot and log the AD issues ? With which tool ? Samba ?

Thank you for your patience ^^
↧

TUMBLEWEED plasmashell :very high usage CPU

November 6, 2018, 2:02 pm
$
0
0
Code:
%Cpu(s): 33.7 us, 42.6 sy,  0.0 ni, 21.5 id,  2.1 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem : 3455.348 total, 1420.090 free, 1003.879 used, 1031.379 buff/cache
MiB Swap: 2283.996 total, 2283.996 free,    0.000 used. 2166.422 avail Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM    TIME+ COMMAND           
  276 root      20  0      0      0      0 R 71.10 0.000  21:28.09 kworker/0:3+kacpid
 5131 manuel    20  0 1328864 205352 108752 R 61.46 5.804  3:02.89 plasmashell       
 5530 manuel    20  0 1572556 170408 119408 S 3.322 4.816  0:14.29 Web Content       
 5374 manuel    20  0  795292 112144  89856 S 2.326 3.169  0:08.43 ksysguard         
 5383 manuel    20  0 2417312 326464 156372 S 1.993 9.227  0:30.62 firefox           
 4981 root      20  0  388040  68632  48280 S 1.329 1.940  0:08.02 X                 
 5637 manuel    20  0  602648  86520  71160 S 1.329 2.445  0:00.90 konsole           
 5127 manuel    20  0 2661448  77680  61656 S 0.332 2.195  0:01.27 kwin_x11         
 5228 manuel    20  0  632204  53708  42180 S 0.332 1.518  0:00.34 ibus-ui-gtk3     
 5435 manuel    20  0 1591988 181268 107520 S 0.332 5.123  0:03.63 Web Content       
 5658 manuel    20  0  24124  4100  3516 R 0.332 0.116  0:00.12 top               
    1 root      20  0  125436  9776  7080 S 0.000 0.276  0:04.21 systemd           
    2 root      20  0      0      0      0 S 0.000 0.000  0:00.00 kthreadd         
    3 root      0 -20      0      0      0 I 0.000 0.000  0:00.00 rcu_gp           
    4 root      0 -20      0      0      0 I 0.000 0.000  0:00.00 rcu_par_gp       
    7 root      20  0      0      0      0 I 0.000 0.000  0:00.22 kworker/u8:0-flus+
    8 root      0 -20      0      0      0 I 0.000 0.000  0:00.00 mm_percpu_wq     
    9 root      20  0      0      0      0 S 0.000 0.000  0:00.23 ksoftirqd/0       
  10 root      20  0      0      0      0 I 0.000 0.000  0:02.07 rcu_preempt       
  11 root      20  0      0      0      0 I 0.000 0.000  0:00.07 rcu_sched         
  12 root      20  0      0      0      0 I 0.000 0.000  0:00.00 rcu_bh

journal systemd
Code:
KActivitiesStats( 0x55c67d25c500 ) ResultModelPrivate::onResultScoreUpdated  result added: "applications:org.kde.konsole.desktop" score: 2 last: 1541540828 first: 1541538442
qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 6147, resource id: 67108871, major code: 142 (Unknown), minor code: 3
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 14566, resource id: 6291502, major code: 18 (ChangeProperty), minor code: 0
plasmashell[5131]
org.kde.plasmaquick: Increasing score for "Lanzador de aplicaciones" to 100
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 7229, resource id: 6291469, major code: 142 (Unknown), minor code: 3
↧

LEAP 15 Konqueror won't exit gracefully in LEAP 15

November 6, 2018, 2:50 pm
$
0
0
I depend heavily on Konqueror for reading man and info pages.
Unfortunately, in Leap 15, Konqueror will only run once in a user session unless extra steps are taken.

I had a bit of brain-fade, so it took longer than it should have to determine the cause but the process for /usr/bin/konqueror doesn't die when the window is closed. I've tried clicking the X in the upper right corner, using the crtl-Q keyboard shortcut and selecting Quit from the File menu. In each case, the window closes but the process doesn't stop. So the next time I try to launch it an entry briefly appears in the taskbar, but then disappears. So I have to
Code:
~> ps -ef | grep konq
ron      3920  2785  1 16:30 ?        00:00:02 /usr/bin/konqueror
ron      3927  2738  0 16:30 ?        00:00:00 file.so [kdeinit5] file local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konqueroriK3920.3.slave-socket
ron      3928  2738  0 16:30 ?        00:00:00 file.so [kdeinit5] file local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konquerorvE3920.4.slave-socket
ron      3929  2738  0 16:30 ?        00:00:00 file.so [kdeinit5] file local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konqueroreY3920.5.slave-socket
ron      3930  2738  0 16:30 ?        00:00:00 file.so [kdeinit5] file local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konquerorYa3920.6.slave-socket
ron      3931  2738  0 16:30 ?        00:00:00 man.so [kdeinit5] man local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konquerorfM3920.7.slave-socket
ron      3936  2738  0 16:31 ?        00:00:00 help.so [kdeinit5] help local:/run/user/1000/klauncherTJ2739.1.slave-socket local:/run/user/1000/konquerorUz3920.8.slave-socket
ron      3954  3875  0 16:32 pts/0    00:00:00 grep --color=auto konq
~> kill 3920
before it will launch again.

I'm getting ready to report it as a bug, but I though I'd check here first to see if there's some configuration error that could cause this.

This machine has been getting upgraded though all of the openSUSE releases since 13.1, so it's certainly possible that there's a configuration artifact remaining from one of the previous releases.

Thanks for your time and knowledge,
ron
↧
Viewing all 40713 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>