Quantcast
Channel: openSUSE Forums
Viewing all 40713 articles
Browse latest View live
↧

LEAP 15.1 No bluetooth adapter found--what next?

August 10, 2019, 2:17 pm
$
0
0
Greetings all

I get a "No Bluetooth adapters have been found" message in KDE's Adapters--System Settings Module utility.

I'm using Leap 15.1; bluetooth worked well under Leap 15 and 42.3.

The machine is an Asus Zenbook UX330UA.

Some diagnostics:

Code:
adam@linux-sv30:~> sudo systemctl status bluetooth
[sudo] password for root:
● bluetooth.service - Bluetooth service
  Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
  Active: inactive (dead)
    Docs: man:bluetoothd(8)
adam@linux-sv30:~>
And:

Code:
adam@linux-sv30:~> sudo rfkill list             
0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
adam@linux-sv30:~>
Any help would be appreciated! I am stumped.
↧
Search

LEAP 15.1 Lost use of middle button on Asus trackpad on Leap 15.1

August 10, 2019, 2:32 pm
$
0
0
Greetings all

When I upgraded from Leap 15.0 to Leap 15.1, I lost the use of my middle button on the trackpad. Left and right work well, and I can set the three-finger-tap action to simulate the middle button---but the touchpad only registers left and right

I'm using an Asus ZenBook UX330UA.

Thank you!
↧
↧

LEAP 15.1 Samaba headache again

August 10, 2019, 6:00 pm
$
0
0
I finally got off my duff and installed 15.1 It went well except for a few minor glitches, Note I don't upgrade I install fresh on a second partition I keep for the purpose. Once all is running I mount my home and I'm off. In any case I have a weird Samba problem. I use Samba as a simple pier to pier to a Win7 VM (VBox) and an very old Eee PC (XP) Now I can see all clients from the Win 7 and the XP connect browse and such but i see nothing from 15.1 not even itself. Seems like every time I upgrade I have to wrestle with Samba.

Her is the smb.conf file I use and has worked in the past

Code:
[global]
    workgroup = MSHOME
    passdb backend = tdbsam
    printing = cups
    printcap name = cups
    printcap cache time = 750
    cups options = raw
    map to guest = Bad User
    include = /etc/samba/dhcp.conf
    #logon path = \\%L\profiles\.msprofile
    #logon home = \\%L\%U\.9xprofile
    #logon drive = P:
    usershare allow guests = Yes
    name resolve order = bcast host lmhosts wins
    netbios name = Linux1
    local master = yes
    os level = 33
    wins support = No
    usershare max shares = 100
    client max protocol = SMB3
    wins server =

[users]
    comment = All users
    path = /home
    read only = No
    guest ok = Yes
    inherit acls = Yes
    veto files = /aquota.user/groups/shares/

[gogalthorp]
    comment = Home sweet home
    path = /home/gogalthorp/
    read only = No
    guest ok = Yes
    force user = gogalthorp
I only understand about 1/2 this stuff

So the server appears to work but the client does not. I have restarted it several times. I think the firewall is set right but with the new zones defined I'm not sure. I may be missing something :P
↧

LEAP 15.1 No fdisk in LEAP 15.1 Rescue

August 10, 2019, 10:35 pm
$
0
0
See title. Nor cfdisk, sfdisk, gdisk parted, gparted, or kparted. There is kpartx, but that's different, right?

Seems strange that the rescue system doesn't have a partitioning tool. I need one to debug some hardware problems. Lots of other utilities in /sbin, /usr/sbin, /usr/bin and /bin so doesn't seem like a size problem with squashfs.

Also, how is this even possible? Isn't install basically the same thing as the rescue system, just running an install script or executable? How does install do its partitioning?

Thanks for any help. I've run out of names of partitioning utilities to look for.
↧

LEAP 15.1 Corrupted graphics on resume from suspend (Acer Swift 5 15.6)

August 10, 2019, 10:44 pm
$
0
0
Suspend to RAM messes up my graphics on resume. The top part of the screen is always corrupted, with irregular rectangles wiped out (see https://imgur.com/TT3bVwq) and flickering at the bottom of the rectangles.

Suspend to RAM does work correctly with Kubuntu 19.0.4, but I'd like to stay with OpenSUSE if i can make this work.

Thanks in advance for any suggestions.

Code:
uname -a
Linux linux-amde 4.12.14-lp151.28.10-default #1 SMP Sat Jul 13 17:59:31 UTC 2019 (0ab03b7) x86_64 x86_64 x86_64 GNU/Linux
Code:
hwinfo --gfxcard
16: PCI 02.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.386]
  Unique ID: _Znp.0XC6RCdIl24
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Device Name: "Onboard - Video"
  Model: "Intel UHD Graphics 620 (Whiskey Lake)"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x3ea0 "UHD Graphics 620 (Whiskey Lake)"
  SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
  SubDevice: pci 0x1305
  Driver: "i915"
  Driver Modules: "i915"
  Memory Range: 0xa0000000-0xa0ffffff (rw,non-prefetchable)
  Memory Range: 0x90000000-0x9fffffff (ro,non-prefetchable)
  I/O Ports: 0x3000-0x303f (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 133 (147459 events)
  Module Alias: "pci:v00008086d00003EA0sv00001025sd00001305bc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

Primary display adapter: #16
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation Device 3e34 (rev 0b)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:02.0 VGA compatible controller: Intel Corporation Device 3ea0 (prog-if 00 [VGA controller])
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0, IRQ 133
        Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
        Memory at 90000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 3000 [size=64]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [100] Process Address Space ID (PASID)
        Capabilities: [200] Address Translation Service (ATS)
        Capabilities: [300] Page Request Interface (PRI)
        Kernel driver in use: i915
        Kernel modules: i915

00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0b)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: fast devsel, IRQ 16
        Memory at a1210000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 3
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device

00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: fast devsel, IRQ 255
        Memory at a122d000 (64-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [dc] Power Management version 2
        Capabilities: [f0] PCI Advanced Features

00:12.0 Signal processing controller: Intel Corporation Device 9df9 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: fast devsel, IRQ 255
        Memory at a122c000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-

00:14.0 USB controller: Intel Corporation Device 9ded (rev 30) (prog-if 30 [XHCI])
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, medium devsel, latency 0, IRQ 132
        Memory at a1200000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:14.2 RAM memory: Intel Corporation Device 9def (rev 30)
        Subsystem: Intel Corporation Device 7270
        Flags: fast devsel
        Memory at a1222000 (64-bit, non-prefetchable) [disabled] [size=8K]
        Memory at a122b000 (64-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [80] Power Management version 3

00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30)
        Subsystem: Intel Corporation Device 0034
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at a121c000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 3
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
        Capabilities: [100] #00
        Capabilities: [14c] Latency Tolerance Reporting
        Capabilities: [164] Vendor Specific Information: ID=0010 Rev=0 Len=014 <?>
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi

00:15.0 Serial bus controller [0c80]: Intel Corporation Device 9de8 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at a1225000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci

00:15.1 Serial bus controller [0c80]: Intel Corporation Device 9de9 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at a1229000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci

00:16.0 Communication controller: Intel Corporation Device 9de0 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0, IRQ 446
        Memory at a1228000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [a4] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
        Memory at a1220000 (32-bit, non-prefetchable) [size=8K]
        Memory at a1227000 (32-bit, non-prefetchable) [size=256]
        I/O ports at 3090 [size=8]
        I/O ports at 3080 [size=4]
        I/O ports at 3060 [size=32]
        Memory at a1226000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [d0] MSI-X: Enable+ Count=1 Masked-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Kernel driver in use: ahci
        Kernel modules: ahci

00:19.0 Serial bus controller [0c80]: Intel Corporation Device 9dc5 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 0, IRQ 32
        Memory at a122a000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci

00:1d.0 PCI bridge: Intel Corporation Device 9db0 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 120
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00004000-00004fff [size=4K]
        Memory behind bridge: a1300000-a14fffff [size=2M]
        Prefetchable memory behind bridge: 00000000a1500000-00000000a16fffff [size=2M]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 1305
        Capabilities: [a0] Power Management version 3
        Kernel driver in use: pcieport

00:1d.4 PCI bridge: Intel Corporation Device 9db4 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 121
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: None
        Memory behind bridge: a1100000-a11fffff [size=1M]
        Prefetchable memory behind bridge: None
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 1305
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [150] Precision Time Measurement
        Capabilities: [200] L1 PM Substates
        Capabilities: [220] #19
        Capabilities: [250] Downstream Port Containment
        Kernel driver in use: pcieport

00:1f.0 ISA bridge: Intel Corporation Device 9d84 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, medium devsel, latency 0

00:1f.3 Multimedia audio controller: Intel Corporation Device 9dc8 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: bus master, fast devsel, latency 32, IRQ 457
        Memory at a1218000 (64-bit, non-prefetchable) [size=16K]
        Memory at a1000000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [50] Power Management version 3
        Capabilities: [80] Vendor Specific Information: Len=14 <?>
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1f.4 SMBus: Intel Corporation Device 9da3 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: medium devsel, IRQ 16
        Memory at a1224000 (64-bit, non-prefetchable) [size=256]
        I/O ports at efa0 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 9da4 (rev 30)
        Subsystem: Acer Incorporated [ALI] Device 1305
        Flags: fast devsel
        Memory at fe010000 (32-bit, non-prefetchable) [size=4K]

02:00.0 Non-Volatile memory controller: Device 1c5c:1327 (prog-if 02 [NVM Express])
        Subsystem: Device 1c5c:0000
        Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
        Memory at a1100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+
        Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-
        Capabilities: [c0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Device Serial Number 04-00-22-8e-ac-e4-2e-84
        Capabilities: [160] Power Budgeting <?>
        Capabilities: [1b8] Latency Tolerance Reporting
        Capabilities: [300] #19
        Capabilities: [400] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [900] L1 PM Substates
        Kernel driver in use: nvme
↧
↧

LEAP 15.1 Leap 15.1 & Plasma

August 10, 2019, 11:17 pm
$
0
0
I am running Leap 15.1 with KDE Frameworks 5.55.0. I am running an old Nvidia GeForce 8400 video card and using the Nvidia driver. Plasma is not stable at all and especially not stable when using the Dolphin file browser. Computer slows down so badly I have to stop and restart the plasmashell roughly every hour. The computer runs fine after restarting plasmashell.

Anyone have any suggestions on how to fix this?
↧

LEAP 15.1 Canon Pixma TS6251 - wireless connection & firewall

August 11, 2019, 1:22 am
$
0
0
I can connect in a wireless way to my Canon Pixma TS6251 printer/scanner if I disable the firewall or if I perform the following steps:
* make sure the printer/scanner gets assigned a fixed IP address by the router (192.168.2.159 in my case)
* add the following rule to the firewall via the command line interface (note that 'home' is the active zone):
firewall-cmd --zone=home --add-rich-rule='rule family="ip v4" source address="192.168.2.159" accept'

Before I tried to use the GUI (via yast2 - Firewall) and opened ports but I could not get that working although I opened all ports mentioned in the documentation and recommended by various websites (80, 161, 427, 443, 515, 631, 8000, 8610-8612, 9100).

So now that I have the scanner/printer working, the question is how to find out which ports are being used and how to best insert/open them in the GUI of the firewall.
↧

LEAP 15.1 Pulseaudio fails to start via systemctl after upgrade

August 11, 2019, 1:31 am
$
0
0
Hi!

Actaully problem I have workaround to live with, but really strange for me. After upgrading Leap 15.0 to 15.1 pulseaudio daemon is not starting on user login and as well via

Code:
systemctl--userstartpulseaudio11:26:58
Job for pulseaudio.service failed because a fatal signal was delivered to the control process.
See "systemctl --user status pulseaudio.service" and "journalctl --user -xe" for details.
Code:
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: Listening on Sound System.
-- Subject: Starring unit UNIT finished
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Процесс запуска юнита UNIT был завершен.
-- 
-- Result: done.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: Starting Sound Service...
-- Subject: Starting UNIT
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Начат процесс запуска юнита UNIT.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: pulseaudio.service: Main process exited, code=killed, status=31/SYS
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: Failed to start Sound Service.
-- Subject: Ошибка юнита UNIT
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Произошел сбой юнита UNIT.
-- 
-- Результат: failed.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: pulseaudio.service: Unit entered failed state.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: pulseaudio.service: Failed with result 'signal'.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: pulseaudio.service: Service RestartSec=100ms expired, scheduling restart.
Авг 11 11:16:48 ThinkPad-E480 systemd[2420]: Stopped Sound Service.
-- Subject: Завершена остановка юнита UNIT.
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Процесс остановки юнита UNIT был завершен.


But, it's ok when starting just via

Code:
pulseaudio --start
from console. Sound is working ok meanwhile even without pulseaudio loaded.
↧
Search

LEAP 15.1 Update error

August 11, 2019, 2:30 am
$
0
0
Hi,

Yesterday I installed OpenSuse 15.1 (as an update from 42.3) and the update manager in the bottom right is saying I have 1512 updates (!!!!!) but is also saying "failed to activate service 'org.freedesktop.PackageKit' timed out" yet when I go into Yast and go to online update, it is showing no updates.

Any thoughts?

Many thanks!
↧
↧

LEAP 15.0 Motion and systemd

August 11, 2019, 3:11 am
$
0
0
When I run motion from the command line works just fine. E.g. as root user both:

Code:
# Run as daemon
motion -b
or
Code:
# Run normally
motion -n
works fine but:
Code:
service motion start
fails and outputs:
Code:
● motion.service - Motion capture                                                                       
  Loaded: loaded (/usr/lib/systemd/system/motion.service; enabled; vendor preset: disabled)
  Active: deactivating (stop-sigterm) since Sun 2019-08-11 03:07:27 MST; 21ms ago
  Process: 557 ExecStart=/usr/bin/motion ${MOTION_OPTIONS} (code=exited, status=0/SUCCESS)
 Main PID: 557 (code=exited, status=0/SUCCESS)
    Tasks: 4 (limit: 4915)
  CGroup: /system.slice/motion.service
          └─558 /usr/bin/motion
Does anyone have any idea why this would be the case?
↧

TUMBLEWEED libicui18n.so.suse63.1

August 11, 2019, 3:30 am
$
0
0
I am trying to get the owncloud client to work on Tumbleweed.
After having installed it from the ownCloud site I will not run, instead giving me the following when run from the command line.
Code:
[martin@linux-q155 ~]$ owncloud
owncloud: error while loading shared libraries: libicui18n.so.suse63.1: cannot open shared object file: No such file or directory
[martin@linux-q155 ~]$
What installs this library? Tried using rpmfind, but this is apparnelty out fo order.
↧

LEAP 15.0 Softwareaktualisierung Conflikt

August 11, 2019, 5:46 am
$
0
0
Hallo Community,

seit letzter Woche bekomme ich eine Fehlermeldung bei der automatischen Aktualisierung.
Es sind somit keine Aktualisierungen mehr möglich.

Die Fehlermeldung:
Fehler beim aktualisieren. patch: 10716-1.noarch conflicts with libvlccore9.x86_64

Ist hier jemanden diese Fehlermeldung bekannt und kann dabei helfen?

Vielen Dank für eure Rückmeldungen.
↧

run sub-script as normal user within a script run by root

August 11, 2019, 6:06 am
$
0
0
Hello.

I run the following script as user root from a terminal in a kde environment. I start it using :
Code:
sudo /path/to/script/main.sh
Code:
#!/bin/bash
#
########################
#
#    {config_script}
#
#    /xxx/yyyyyyy/main.sh
#
#    §2019_08_11§
#
#    ¨version:34¨
#
#    ɸminor_version:0-0-0ɸ
#
########################

# # ensure running as root
if [ "$(id -u)" != "0" ]; then
    echo
    echo
    echo "This script must be run as root user"
    echo
    echo
    exit 255
fi

#
# TASK 1
#
/xxx/yyyyyyy/task_1.sh

#
# TASK 2
#
/xxx/yyyyyyy/task_2.sh

#
# TASK 3
#
/xxx/yyyyyyy/task_3.sh

.....................
.....................
.....................
.....................

#
# TASK n
#
/xxx/yyyyyyy/task_n.sh
Some sub-script 'zzzzz' within script 'xxxxxx' (run as root user) must be run as normal user 'userA' .
Or some command must be run as normal user 'userA' .

As an real example, I need to create a firefox profile for 'userA' .
To do so, within the caller script 'xxxxxxxx' I call a script named : create_firefox_profile_user.sh
Code:
runuser -l userA  -c '/path/to/script/create_firefox_profile_user.sh  "userA" '
Code:
#!/bin/bash
#
#
########################
#
#    {config_jcd}
#
#    /xxx/yyyyyyy/create_firefox_profile_user.sh
#
#    §2019_08_11§
#
#    ¨version:34¨
#
#    ɸminor_version:0-0-0ɸ
#
########################

CUR_USER="$1"
echo "Creating firefox profile for user $CUR_USER"
firefox -P
I got an error :
Code:
Error: no DISPLAY environment variable specified
Changing the command to :
Code:
DISPLAY=":0"  firefox -P
suppress the error.

Is there a more academic way to run script as another user without the error concerning the dispaly variable.
Is there other environment variables that are not set from the point of view of the user currently changed.

Any help and/or comments are welcome.
↧
↧

TUMBLEWEED How to create ISO image with KIWI that have yast2-installation?

August 12, 2019, 4:55 am
$
0
0
Hello,
I'm creating my own openSUSE custom ISO with KIWI.
I manage to create live ISO and OEM, but the OEM simply install the ISO without user interaction.
I want to create image that user can do partitioning and filesystem creation, pretty much like the openSUSE ISO on the website that we all install.

I'm not sure if using KIWI is the correct approach. But I believe if I need yast2-installation module to start.

Thanks.
↧

LEAP 15.1 Wireless stats

August 12, 2019, 5:18 am
$
0
0
Wondering how I can get information on my wireless connection?
ie Wireless format (G/N/AC?), speed up/down, signal strength etc.
Thanks.
↧
Search

TUMBLEWEED X does not start after recent update

August 12, 2019, 5:47 am
$
0
0
X does not start after recent `zypper dup` update yesterday. Also plymouth resolution become very low on start. Any fix?
↧

LEAP 15.1 Nieuwe installatie geeft verschillende problemen

August 12, 2019, 7:53 am
$
0
0
Tijdens de installatie van Leap 15.1 op een DELL XPS13 konden 4 "zypper" programma's niet geinstalleerd worden, na installatie lukte dat wel, ging zelfs automatisch als je naar de softwaremanagement in Yast ging.
Op het einde van de installatie kreeg ik nog een melding van iets verkeerds, het advies was:
Code:
save_y2logs
te draaien. Dat leverde een bestand "y2log-NvaqgP.tar.xz" op, waar ik, ook uitgepakt, geen wijs uit werd. (kan ik zoiets attachen aan een bericht?)

Waar ik anders nooit last van heb gehad, was hetvolgende in Bash:

Code:
pcools@linux-p3mg:~> man ls
man: can't set the locale; make sure $LC_* and $LANG are correct
Man: find all matching manual pages (set MAN_POSIXLY_CORRECT to avoid this)
 * ls (1)
  ls (1p)
Man: What manual page do you want?
Man:
Het gaat dus om de eerste twee regels na mijn opdracht.
↧
↧

TUMBLEWEED Why is OpenSUSE Tumbleweed taking ages to boot?

August 12, 2019, 10:40 am
$
0
0
Hi all,
recently installed openSUSE and I can say I am loving it! However I noticed that it is taking anywhere from 2-4 mins to boot. The first time I booted it after installation it took seconds (should note this is on an ssd) but now it seems to be taking forever. I havent done anyting but install steam and nvidia drivers and a few other programs. Here is the first 3 lines of my systemd-analyze blame output
Text
2min 3.902s btrfsmaintenance-refresh.service
2min 2.166s chrony-wait.service
1min 59s plymouth-quit-wait.service

I have no clue what these services are and why they are taking so long, please someone help!
↧

LEAP 15.1 cant decrypt main drive on Boot.

August 12, 2019, 11:40 am
$
0
0
Hello,

I have removed 3 harddrives from my system, now the system is stuck and cant decrypt.
I used this fix avoiding to type the pw twice, without any clue what I was doing. It worked, now I guess the name of the drive has changed, causing it to crash. Because it works with all other drives attached.

I want to type the pw, twice again. How to do that?

with my next system I will disable encryption for sure..>:(rotfl!
↧

TUMBLEWEED How to correctly shut-up "pam_unix(sudo:session)" syslog spam?

August 12, 2019, 12:37 pm
$
0
0
I run
Code:
    ssh -V
        OpenSSH_8.0p1, OpenSSL 1.1.1c  28 May 2019
on
Code:
    lsb_release -rd
        Description:    openSUSE Leap 15.1
        Release:        15.1
as well as a # of TW instances.

Every time I ssh to a remote, e.g.
Code:
    whoami
        pgnd
    ssh -F /etc/ssh/ssh_config -l root remote.example.com
the remote syslog gets spammed with,
Code:
    Aug 12 12:18:07 remote sshd[6608]: Accepted publickey for root from 10.10.10.66 port 30518 ssh2: ED25519 SHA256:i0...yY
    Aug 12 12:18:08 remote sudo:    root : TTY=pts/2 ; PWD=/root ; USER=root ; COMMAND=/bin/ln -sf /usr/bin/gcc-9 /usr/bin/gcc
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session opened for user root by root(uid=0)
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session closed for user root
    Aug 12 12:18:08 remote sudo:    root : TTY=pts/2 ; PWD=/root ; USER=root ; COMMAND=/bin/ln -sf /usr/bin/g++-9 /usr/bin/g++
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session opened for user root by root(uid=0)
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session closed for user root
    Aug 12 12:18:08 remote sudo:    root : TTY=pts/2 ; PWD=/root ; USER=root ; COMMAND=/bin/ln -sf /usr/bin/gcc-9 /usr/bin/cc
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session opened for user root by root(uid=0)
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session closed for user root
    Aug 12 12:18:08 remote sudo:    root : TTY=pts/2 ; PWD=/root ; USER=root ; COMMAND=/bin/ln -sf /usr/bin/g++-9 /usr/bin/c++
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session opened for user root by root(uid=0)
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session closed for user root
    Aug 12 12:18:08 remote sudo:    root : TTY=pts/2 ; PWD=/root ; USER=root ; COMMAND=/bin/ln -sf /usr/bin/cpp-9 /usr/bin/cpp
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session opened for user root by root(uid=0)
    Aug 12 12:18:08 remote sudo: pam_unix(sudo:session): session closed for user root
This

How to stop sudo PAM messages in auth.log for a specific user?
https://unix.stackexchange.com/quest...-specific-user

, for Debian, suggests shutting-up the pam_unix sudo spam with an edit to
Code:
    /etc/pam.d/sudo
        ...
+        session [success=1 default=ignore] pam_succeed_if.so quiet uid = 0 ruser = zabbix
        session required pam_unix.so:
        ...
on my boxes, the file's got different content that Debian to start with,
Code:
    /etc/pam.d/sudo

        #%PAM-1.0
        auth    include        common-auth
        account  include        common-account
        password include        common-password
        session  optional      pam_keyinit.so revoke
        session  include        common-session
        # session  optional      pam_xauth.so
where,

(a) it does NOT use Debian's "@include" syntax,

&

(b) there's no instance of "pam_unix.so"

On Leap/TW, what -- specifically -- needs to be added/changed it its pam config to similarly shut this log-spam up?
↧
Viewing all 40713 articles
Browse latest View live
Search