Hi - Has anyone else had this problem? I'm running OpenSuse Leap 15.1 and all has been stable for a long time. Immediately after today's updates installed, the network stopped working. I could not get Wireless to work which is all I ever use on this laptop. I rebooted and no difference. After investigating many things, I discovered that if I complete delete the network configuration using Yast and add it again, the network will work after that. However, as soon as I reboot, it fails again. I resolved this for now, by using Network Manager rather than Wicked. A little less convenient for me so I'd like to go back. But in the mean time, it works for me. Any ideas on what to check? When I say it stopped working after updates, I literally mean I was using my browser while the updating was going on and as soon as I got the notification that the updates finished, the network stopped working. I noticed that one of the updates was wpa_suppicant which makes me wonder whether this might somehow be the culprit. Thanks.
↧
LEAP 15.1 Network no longer works using wicked after today's (March 21) automatic updates
↧
TUMBLEWEED HPLIP Icon Inactive
The icon for the current version of the hplip program, HP Device Manager, is not active in Gnome when clicked.
I've had people walk me through problem solving this before, but it so rarely happens that I have to learn all over again every time.
Can someone walk me through how to correct "dead icon" bugs.
Thanks so much!
I've had people walk me through problem solving this before, but it so rarely happens that I have to learn all over again every time.
Can someone walk me through how to correct "dead icon" bugs.
Thanks so much!
↧
↧
microfocus login page not working
If I click on "Login" at the top of a Forum page, I get to
https://login.microfocus.com/nidp/id...forum.php%2522
(possibly with some different "destination" field depending on which page I'm looking at)
However the "Login" button on this page doesn't do anything: Firefox shows no hyperlink behind it. It makes no difference whetheror not I type in my username and password, the button is still not alive.
If I click on "Login Assistance", I get to
https://www.suse.com/selfreg/jsp/forgotAll.jsp
and if I then click on "Account" it shows a dropdown login window on which I can successfully log in.
There seem to have been some similar problems posted in the past, but they are all closed, and this issue is definitely reproducible and still current for me.
Browser is (according to its about page)
Firefox Quantum Extended Support Release 68.6.0esr (64-bit)
Firefox for openSUSE Leap openSUSE - 15.1
https://login.microfocus.com/nidp/id...forum.php%2522
(possibly with some different "destination" field depending on which page I'm looking at)
However the "Login" button on this page doesn't do anything: Firefox shows no hyperlink behind it. It makes no difference whetheror not I type in my username and password, the button is still not alive.
If I click on "Login Assistance", I get to
https://www.suse.com/selfreg/jsp/forgotAll.jsp
and if I then click on "Account" it shows a dropdown login window on which I can successfully log in.
There seem to have been some similar problems posted in the past, but they are all closed, and this issue is definitely reproducible and still current for me.
Browser is (according to its about page)
Firefox Quantum Extended Support Release 68.6.0esr (64-bit)
Firefox for openSUSE Leap openSUSE - 15.1
↧
LEAP 15.1 bond or team?
https://doc.opensuse.org/documentation/leap/reference/html/book.opensuse.reference/cha-network.html#sec-network-iface-teaming
According to the documentation, team is now the new implementation to load balancing and failover network cards - and do pretty the same work as bond.
I have tried team and it seams to work quite well.
One disadvantage is that yast still do not support this.
Regarding this, what is your implementation? Bond or team?
Did you try to setup team with autoyast?
Maybe someone know what was the reason to implement team as bond seems to work pretty good?
What about the dependency (cooperation) with team + vlan and bridge - I am trying to use team in KVM virtualization.
(the reason I put this thread in virtualization section).
↧
TUMBLEWEED VLC Downloads video files from SMB Shared Directory to local cache directory before playing.
I was not sure if I should be posting this under Multimedia or Applications, hopefully I have chosen the right location for posting it.
What I want to do:
I am trying to play the video files which are shared on a NAS via SMB share on my OpenSUSE Tumbleweed laptop with VLC in place, as in straight from the shared location, just like I can with the Windows machines on the same network using the VLC for windows.
What Happens:
Instead of playing the file in place, the VLC (Or dolphin, I am not sure on this) first downloads the files to a local cache folder (~/user/.cache/kioexec/krun/) and then plays the file. This is sometimes a lengthy process as some of the files are huge, 80+ Gigabytes.
This is what happens when I double click on the file in the shared location on the network. Opening the VLC, and browsing over to the file using the Open File feature fails to open the file altogether with a "SMB error: open failed (Invalid Argument)".
As I previously mentioned the VLC for Windows installed on the windows machines of the same network works just fine playing the same files, regardless of their size, straight from the NAS.
Any help is very much appreciated.
What I want to do:
I am trying to play the video files which are shared on a NAS via SMB share on my OpenSUSE Tumbleweed laptop with VLC in place, as in straight from the shared location, just like I can with the Windows machines on the same network using the VLC for windows.
What Happens:
Instead of playing the file in place, the VLC (Or dolphin, I am not sure on this) first downloads the files to a local cache folder (~/user/.cache/kioexec/krun/) and then plays the file. This is sometimes a lengthy process as some of the files are huge, 80+ Gigabytes.
This is what happens when I double click on the file in the shared location on the network. Opening the VLC, and browsing over to the file using the Open File feature fails to open the file altogether with a "SMB error: open failed (Invalid Argument)".
As I previously mentioned the VLC for Windows installed on the windows machines of the same network works just fine playing the same files, regardless of their size, straight from the NAS.
Any help is very much appreciated.
↧
↧
LEAP 15.1 rmt in opensuse 15.1
It is possible to use rmt in opensuse just for opensuse repository and without registration to scc?
I have skip the scc credential in rmt.conf file and now each time I am trying to sync or run rmt I am getting:
The SCC credentials are not configured correctly in '/etc/rmt.conf'. You can obtain them from https://scc.suse.com/organization
Maybe I need a account, but without any subscription - or without attaching to scc with SUSE ent. licencse I am not able to use rmt in purely opensuse environment?
I have skip the scc credential in rmt.conf file and now each time I am trying to sync or run rmt I am getting:
The SCC credentials are not configured correctly in '/etc/rmt.conf'. You can obtain them from https://scc.suse.com/organization
Maybe I need a account, but without any subscription - or without attaching to scc with SUSE ent. licencse I am not able to use rmt in purely opensuse environment?
↧
LEAP 15.1 Erratic wireless connection with Broadcom BCM4313 and similar cards
Hi,
I have an old MacBook Pro running OpenSUSE Leap 15.1 instead of macOS. Everything works fine, except that wireless connections sometimes behave erratically. As far as I could make it out, some access points work fine and others don't.
First things first, here's the card.
I installed b43-fwcutter and then the firmware:
And just to be on the safe side, I blacklisted the free drivers (which don't work at all):
I rebooted, and wireless works OK most of the time.
Here's the curious part.
Sometimes I see various available access points except those in the immediate vicinity. Sometimes I disconnect and all available access points suddenly disappear. Sometimes they reappear, sometimes they don't. I'm describing all this as it appears to me, since most of the time this seems completely random.
I've installed a Dell Latitude laptop for one of my clients some time ago. This laptop has a Broadcom 43XXX card (must verify which one exactly) and the client recently described a similar erratic malfunction. What happened with his machine was even more puzzling. It worked perfectly in my office on no less than three different access points. Then I snail-mailed the laptop to him, and he can't use it in his office, because all access points except his show up.
Any suggestions ?
Cheers from the sunny (and confined) South of France,
Niki
I have an old MacBook Pro running OpenSUSE Leap 15.1 instead of macOS. Everything works fine, except that wireless connections sometimes behave erratically. As far as I could make it out, some access points work fine and others don't.
First things first, here's the card.
Code:
# lspci | grep -i network
25:00.0 Network controller: Broadcom Limited BCM4313 802.11bgn
Wireless Network Adapter (rev 01)Code:
# zypper install b43-fwcutter
# install_bcm43xx_firmwareCode:
# zypper addlock broadcom-wl
# zypper addlock broadcom-wl-kmp-defaultHere's the curious part.
Sometimes I see various available access points except those in the immediate vicinity. Sometimes I disconnect and all available access points suddenly disappear. Sometimes they reappear, sometimes they don't. I'm describing all this as it appears to me, since most of the time this seems completely random.
I've installed a Dell Latitude laptop for one of my clients some time ago. This laptop has a Broadcom 43XXX card (must verify which one exactly) and the client recently described a similar erratic malfunction. What happened with his machine was even more puzzling. It worked perfectly in my office on no less than three different access points. Then I snail-mailed the laptop to him, and he can't use it in his office, because all access points except his show up.
Any suggestions ?
Cheers from the sunny (and confined) South of France,
Niki
↧
LEAP 15.1 KDE 3 Revival
Hello!
How to start a KDE 3 session? I mean, which window manager should I choose as default in etc/sysconfig-Editor?
At the moment it is default in.
Why KDE 3?
KDE Plasma is really to heavy for my old netbook. When I noticed, the KDE 3 repository is maintained again
http://download.opensuse.org/reposit...USE_Leap_15.1/
I thought, I try this.
Thanks in advance for your suggestions
How to start a KDE 3 session? I mean, which window manager should I choose as default in etc/sysconfig-Editor?
At the moment it is default in.
Why KDE 3?
KDE Plasma is really to heavy for my old netbook. When I noticed, the KDE 3 repository is maintained again
http://download.opensuse.org/reposit...USE_Leap_15.1/
I thought, I try this.
Thanks in advance for your suggestions
↧
TUMBLEWEED Boot Issue After Clean Install On Notebook
Howdy,
just switched from Manjaro Linux 19.0.2 to Tumbleweed, clean install via openSUSE-Tumbleweed-DVD-x86_64-Snapshot20200318-Media.iso erasing whole disk on a HP Pavilion 15-b119sl Sleekbook with a single Kingston HyperX FURY SSD (SHFS37A/240G), chose Btrfs for / and XFS for /home, upon restart I get this:
Power cycling and selecting the boot options (F9) I get the following and I'm able to boot the OS only by selecting opensuse (KINGSTON SHFS37A20G) manually, every boot.
What did I do wrong please?
just switched from Manjaro Linux 19.0.2 to Tumbleweed, clean install via openSUSE-Tumbleweed-DVD-x86_64-Snapshot20200318-Media.iso erasing whole disk on a HP Pavilion 15-b119sl Sleekbook with a single Kingston HyperX FURY SSD (SHFS37A/240G), chose Btrfs for / and XFS for /home, upon restart I get this:
Code:
Welcome To GRUB!
error: unknown filesystem.
Entering rescue mode...
grub rescue> _Code:
grub (KINGSTON SHFS37A20G)
EFI HDD device (KINGSTON SHFS37A20G)
opensuse (KINGSTON SHFS37A20G)↧
↧
[security-announce] openSUSE-SU-2020:0332-1: moderate: Security update for gd
openSUSE Security Update: Security update for gd ______________________________________________________________________________ Announcement ID: openSUSE-SU-2020:0332-1 Rating: moderate References: #1140120 #1165471 Cross-References: CVE-2018-14553 CVE-20...
More...
More...
↧
LEAP 15.1 KDE Dolphin Network Folder Wizard problem
1 -Start Point
3 computers : Computer 1 run leap 15.0; Computer 2 run leap 15.1 Computer 3 run leap 15.0
No problems with KDE Dolphin Network Folder Wizard.
Computer 2 is down and replaced.
I take this opportunity to test some scripts for automatically configure any new computer from a script. These tests did not involve changes on computers 1 and 3.0 But public and private SSH keys and . ppk kery bhave been replaced on all three computers.
2 - What works
A standard user can use putty to all three computers from any of all 3 computers.
User root can use putty to to all three computers from any of all 3 computers.
A standard user can ssh to its home folder on all three computers from any of all 3 computers.
User root can ssh to its home folder on all three computers from any of all 3 computers.
Starting dolphin in super user mode it is possible to create and save any link to root home folder on any computer from any computer.
Starting dolphin in super user mode it is possible to create and save any link to a standard user home folder on any computer from any computer.
You can start a sftp session from command line from any computer.
Example from computer 1 ( Leap 15.0)
On computer 2 only it is possible for the initial standard user ( there is no other user on this computer ) to create and save any link to it's home folder on any computer (from computer 2).
3 - What does not work.
On computer 1 and 3 it is impossible for the initial standard user ( all computers have the same initial user ) to create and save any link to it's home folder on any other computer ( from computer 1 to computer 2 and 3 ; from computer 3 to computer 1 and 2 ).
4- Error message during an attempt to create a network folder.
Journald message on sender :
Debug message on remote side :
Any help is welcome
3 computers : Computer 1 run leap 15.0; Computer 2 run leap 15.1 Computer 3 run leap 15.0
No problems with KDE Dolphin Network Folder Wizard.
Computer 2 is down and replaced.
I take this opportunity to test some scripts for automatically configure any new computer from a script. These tests did not involve changes on computers 1 and 3.0 But public and private SSH keys and . ppk kery bhave been replaced on all three computers.
2 - What works
A standard user can use putty to all three computers from any of all 3 computers.
User root can use putty to to all three computers from any of all 3 computers.
A standard user can ssh to its home folder on all three computers from any of all 3 computers.
User root can ssh to its home folder on all three computers from any of all 3 computers.
Starting dolphin in super user mode it is possible to create and save any link to root home folder on any computer from any computer.
Starting dolphin in super user mode it is possible to create and save any link to a standard user home folder on any computer from any computer.
You can start a sftp session from command line from any computer.
Example from computer 1 ( Leap 15.0)
Code:
sftp -4 -i /home/user_install/.ssh/id_rsa -P 11945 user_install@192.168.130.80:/home/user_install
+----------------------------------------------------------------+
| |
| Unauthorized or improper use of this system may result in |
| administrative disciplinary action, civil charges/criminal |
| penalties, and/or other sanctions. By continuing to use this |
| system you indicate your awareness of and consent to these |
| terms and conditions of use. |
| |
+----------------------------------------------------------------+
Connected to 192.168.130.80.
Changing to: /home/user_install
sftp> ls
000_linx_echg.txt 1111111111111
92ff1fae-5904-46d1-9b97-07cd90d35c39.jpg Desktop
Documents Downloads
.........
....On computer 2 only it is possible for the initial standard user ( there is no other user on this computer ) to create and save any link to it's home folder on any computer (from computer 2).
3 - What does not work.
On computer 1 and 3 it is impossible for the initial standard user ( all computers have the same initial user ) to create and save any link to it's home folder on any other computer ( from computer 1 to computer 2 and 3 ; from computer 3 to computer 1 and 2 ).
4- Error message during an attempt to create a network folder.
Journald message on sender :
Code:
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: *** Starting kio_sftp
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: pid = 6417
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: debug =
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: "user_install" @ "192.168.130.80" : 11945
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp:
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: QUrl("sftp://user_install@192.168.130.80:11945/home/user_install")
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: checking cache: info.username = "user_install" , info.url = "sftp://user_install@192.168.130.80:11945"
mars 22 18:39:56 MY-SERVER-LINUX kiod5[3892]: org.kde.kio.kpasswdserver: User = "user_install" , WindowId = 136314885
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Creating the SSH session and setting options
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Trying to connect to the SSH server
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: username= "user_install" , host= "192.168.130.80" , port= 11945
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Getting the SSH server hash
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Checking if the SSH server is known
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Trying to authenticate with the server
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: Trying to authenticate with public key
mars 22 18:39:56 MY-SERVER-LINUX kdeinit5[6417]: log_kio_sftp: connected ? false username: old= "user_install" new= "user_install"Code:
Server listening on 0.0.0.0 port 11945.
debug1: Server will not fork when running in debugging mode.
debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
debug1: sshd version OpenSSH_7.6, OpenSSL 1.1.0i-fips 14 Aug 2018
debug1: private host key #0: ssh-rsa SHA256:y2hZs9WJEbGVgeS2dKDgt4NexbIYpL2biJC+HPQfpX8
debug1: private host key #1: ssh-dss SHA256:CjFEq2zmk4P5AOnzF+A1NOaGlmMNKYM3Jh+3IkPjD00
debug1: private host key #2: ecdsa-sha2-nistp256 SHA256:gAQHoyJrd0fIYz/tP75Dg8d+x1pMiI4fsjBXsdxM6X4
debug1: private host key #3: ssh-ed25519 SHA256:IbWzsy4tYwRz4YewkRPyOflz+lz7brnbNjQDrLhlsz0
debug1: inetd sockets after dupping: 3, 3
Connection from 192.168.130.123 port 55212 on 192.168.130.80 port 11945
debug1: Client protocol version 2.0; client software version libssh_0.7.5
debug1: no match: libssh_0.7.5
debug1: Local version string SSH-2.0-OpenSSH_7.6
debug1: permanently_set_uid: 472/475 [preauth]
debug1: list_hostkey_types: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug1: kex: algorithm: curve25519-sha256@libssh.org [preauth]
debug1: kex: host key algorithm: ssh-ed25519 [preauth]
debug1: kex: client->server cipher: aes256-ctr MAC: hmac-sha2-256 compression: none [preauth]
debug1: kex: server->client cipher: aes256-ctr MAC: hmac-sha2-256 compression: none [preauth]
debug1: kex: curve25519-sha256@libssh.org need=32 dh_need=32 [preauth]
debug1: kex: curve25519-sha256@libssh.org need=32 dh_need=32 [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug1: rekey after 4294967296 blocks [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: rekey after 4294967296 blocks [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user user_install service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: PAM: initializing for "user_install"
debug1: PAM: setting PAM_RHOST to "192.168.130.123"
debug1: PAM: setting PAM_TTY to "ssh"
debug1: userauth_send_banner: sent [preauth]
debug1: userauth-request for user user_install service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: userauth_pubkey: test whether pkalg/pkblob are acceptable for RSA SHA256:mNrAjD7bA47LnmV2OVsIl6G/ytJT62IUuDfJ02QAHw8 [preauth]
debug1: temporarily_use_uid: 1000/100 (e=0/0)
debug1: trying public key file /home/user_install/.ssh/authorized_keys
debug1: fd 4 clearing O_NONBLOCK
debug1: matching key found: file /home/user_install/.ssh/authorized_keys, line 3 RSA SHA256:mNrAjD7bA47LnmV2OVsIl6G/ytJT62IUuDfJ02QAHw8
debug1: restore_uid: 0/0
Postponed publickey for user_install from 192.168.130.123 port 55212 ssh2 [preauth]
Received disconnect from 192.168.130.123 port 55212:11: Bye Bye [preauth]
Disconnected from authenticating user user_install 192.168.130.123 port 55212 [preauth]
debug1: do_cleanup [preauth]
debug1: monitor_read_log: child log fd closed
debug1: do_cleanup
debug1: PAM: cleanup
debug1: Killing privsep child 6441↧
[Mark needed] Bonsole - browser console
I need to mark my project, which I uploaded to sourceforge.net ( https://sourceforge.net/projects/bonsole/ ) .
It allows to create Rich Textual Applications. These kind of apps will display in Browser (bonsole) window, if it;s available. If not, it will translates markup code to text with terminal escaping sequence. Currently, textual/without graphics mode isn't supported.
Application run by Bonsole must call some function from client library. This function checks if there's exist some variables in environment, point to fd to acquire cookie. This function also prepare client lib for processing app output, listing xsl files.
Application generates XML output and when decided to swap Bonsole's window content, XML output is processed by xsl files in order like in other places on Linux systems (xsl files beginning with natural number). Yes, we translate output of app by first xsl file, output of this file by another one and so on...
I also plan add new pipe kind. This kind of pipes uses normal fd, but it can have name known by application and data generated by application to this pipe will be filtered by some files, I think xsl could be one of option, but xsl is related to xml, so we must have each tag enclosed. This implies app must generate whole output.
Currently we have only one example app - app similar to ls.
To use Bonsole, you must give an argument with path to xsl files.
--bonsole-wa-xsl-dir /path/to/xsls
Default xls is placed in project_dir/data/xslt
It allows to create Rich Textual Applications. These kind of apps will display in Browser (bonsole) window, if it;s available. If not, it will translates markup code to text with terminal escaping sequence. Currently, textual/without graphics mode isn't supported.
Application run by Bonsole must call some function from client library. This function checks if there's exist some variables in environment, point to fd to acquire cookie. This function also prepare client lib for processing app output, listing xsl files.
Application generates XML output and when decided to swap Bonsole's window content, XML output is processed by xsl files in order like in other places on Linux systems (xsl files beginning with natural number). Yes, we translate output of app by first xsl file, output of this file by another one and so on...
I also plan add new pipe kind. This kind of pipes uses normal fd, but it can have name known by application and data generated by application to this pipe will be filtered by some files, I think xsl could be one of option, but xsl is related to xml, so we must have each tag enclosed. This implies app must generate whole output.
Currently we have only one example app - app similar to ls.
To use Bonsole, you must give an argument with path to xsl files.
--bonsole-wa-xsl-dir /path/to/xsls
Default xls is placed in project_dir/data/xslt
↧
TUMBLEWEED Google Chrome Installed Correctly?
Followed the instros from https://www.google.com/linuxrepositories/ but Dicover couldn't install the package and failed with internal error, went the Zypper way and it seems to have worked, can anyone please explain the last part to me, the additional rpm output one, I'm trying to learn my way around openSUSE, thanks a lot.
Code:
dar@linux:/tmp/mozilla_dar0> wget https://dl.google.com/linux/linux_signing_key.pub
--2020-03-23 08:57:08-- https://dl.google.com/linux/linux_signing_key.pub
Resolving dl.google.com (dl.google.com)... 216.58.205.78, 2a00:1450:4002:807::200e
Connecting to dl.google.com (dl.google.com)|216.58.205.78|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10218 (10.0K) [application/octet-stream]
Saving to: ‘linux_signing_key.pub’
linux_signing_key.pub 100%[======================================================================================================>] 9.98K --.-KB/s in 0.002s
2020-03-23 08:57:08 (4.02 MB/s) - ‘linux_signing_key.pub’ saved [10218/10218]
dar@linux:/tmp/mozilla_dar0> sudo rpm --import linux_signing_key.pub
warning: Rebuilding outdated index databases
warning: Generating 18 missing index(es), please wait...
dar@linux:/tmp/mozilla_dar0> rpm --checksig -v google-chrome-stable_current_x86_64.rpm
google-chrome-stable_current_x86_64.rpm:
Header V4 DSA/SHA1 Signature, key ID 7fac5991: OK
Header SHA1 digest: OK
V4 DSA/SHA1 Signature, key ID 7fac5991: OK
MD5 digest: OK
dar@linux:/tmp/mozilla_dar0> sudo zypper install google-chrome-stable_current_x86_64.rpm
Loading repository data...
Reading installed packages...
Resolving package dependencies...
The following 5 NEW packages are going to be installed:
google-chrome-stable libappindicator3-1 libdbusmenu-glib4 libdbusmenu-gtk3-4 libindicator3-7
5 new packages to install.
Overall download size: 60.4 MiB. Already cached: 203.8 KiB. After the operation, additional 213.8 MiB will be used.
Continue? [y/n/v/...? shows all options] (y): y
In cache libdbusmenu-glib4-16.04.0-6.1.x86_64.rpm (1/5), 66.8 KiB (188.2 KiB unpacked)
In cache libindicator3-7-16.10.0+bzr20171205-3.1.x86_64.rpm (2/5), 44.5 KiB (110.8 KiB unpacked)
In cache libdbusmenu-gtk3-4-16.04.0-6.1.x86_64.rpm (3/5), 54.6 KiB (156.5 KiB unpacked)
In cache libappindicator3-1-12.10.1+bzr20170215-7.1.x86_64.rpm (4/5), 38.0 KiB ( 88.7 KiB unpacked)
Retrieving package google-chrome-stable-80.0.3987.149-1.x86_64 (5/5), 60.4 MiB (213.3 MiB unpacked)
Checking for file conflicts: ............................................................................................................................................................[done]
(1/5) Installing: libdbusmenu-glib4-16.04.0-6.1.x86_64 ..................................................................................................................................[done]
(2/5) Installing: libindicator3-7-16.10.0+bzr20171205-3.1.x86_64 ........................................................................................................................[done]
(3/5) Installing: libdbusmenu-gtk3-4-16.04.0-6.1.x86_64 .................................................................................................................................[done]
(4/5) Installing: libappindicator3-1-12.10.1+bzr20170215-7.1.x86_64 .....................................................................................................................[done]
(5/5) Installing: google-chrome-stable-80.0.3987.149-1.x86_64 ...........................................................................................................................[done]
Additional rpm output:
service: no such service atd
update-alternatives: using /usr/bin/google-chrome-stable to provide /usr/bin/google-chrome (google-chrome) in auto mode↧
↧
LEAP 15.1 Which user delivers mail locally that arrives via Postfix
I am using emails delivered locally to trigger commands via the /etc/aliases file i.e. piping to a command. All works well until I want to run a command that requires root privileges. I use sudo but can’t work out which user is executing the command and so currently have:
in my /etc/sudoers file but want to lock it down by replacing the first ALL with the correct user. So for tried “mail” and “postfix”. Neither work. what should it be?
Thanks
PS Yes, I will be licking down the commands too, to just what I need
Code:
ALL ALL=(ALL) NOPASSWD: ALLin my /etc/sudoers file but want to lock it down by replacing the first ALL with the correct user. So for tried “mail” and “postfix”. Neither work. what should it be?
Thanks
PS Yes, I will be licking down the commands too, to just what I need
↧
TUMBLEWEED Plasma And System Language Change
Selected Italian formats and system turned to Italian, but it's still set to American English, what don't I understand please?
![]()
![]()
![]()
![]()
Thank you.
Thank you.
↧
LEAP 15.2 Failed SSH login attempts on my server
Hello everyone,
i set up a little home server a few days ago where i run a Minecraft server and also hosted a rather minimalistic Website with apache2. The Website simply consisted of the Phrases "Check out my Minecraft Server" and then the domain of my server (I set up a DynDNS domain with NO-IP.com). I forward The port of my MC server, http and ssh port from my router to my server. The ssh port to have remote access when im not home. Since i was a bit worried with the publicly visible ssh port i decided to read how to check the ssh logs on my server and now i am a bit worried since there where actually many login attemps from several ips (All reported failed fortunately) which look like some sort of dictonary attack. Here an Excerpt from the logs:
as can be seen the attemps are quite new and many of them in almost 1 second or so. I have changed my password already to make it a bit safer but i am a bit concerned about this. I already shut down the apache server and closed the ssh and http port to be save. Was that the right decision or is it not to worry if i have a randomly generated save password?
i set up a little home server a few days ago where i run a Minecraft server and also hosted a rather minimalistic Website with apache2. The Website simply consisted of the Phrases "Check out my Minecraft Server" and then the domain of my server (I set up a DynDNS domain with NO-IP.com). I forward The port of my MC server, http and ssh port from my router to my server. The ssh port to have remote access when im not home. Since i was a bit worried with the publicly visible ssh port i decided to read how to check the ssh logs on my server and now i am a bit worried since there where actually many login attemps from several ips (All reported failed fortunately) which look like some sort of dictonary attack. Here an Excerpt from the logs:
Code:
:~> sudo grep "Invalid user" /var/log/messages
.
.
.
2020-03-23T00:05:35.640112+01:00 linux-mhfa sshd[25359]: Invalid user 1 from 142.4.212.119 port 35928
2020-03-23T00:05:35.643729+01:00 linux-mhfa sshd[25361]: Invalid user 12345 from 142.4.212.119 port 36320
2020-03-23T00:05:35.654063+01:00 linux-mhfa sshd[25365]: Invalid user 123456789 from 142.4.212.119 port 36712
2020-03-23T00:05:35.662479+01:00 linux-mhfa sshd[25367]: Invalid user 123@ from 142.4.212.119 port 37006
2020-03-23T00:05:35.666035+01:00 linux-mhfa sshd[25370]: Invalid user 1234567@ from 142.4.212.119 port 37396
2020-03-23T00:05:35.666415+01:00 linux-mhfa sshd[25368]: Invalid user 12345@ from 142.4.212.119 port 37200
2020-03-23T00:05:35.676075+01:00 linux-mhfa sshd[25373]: Invalid user 123456789@ from 142.4.212.119 port 37592
2020-03-23T00:05:35.754702+01:00 linux-mhfa sshd[25379]: Invalid user P@ssw0rd from 142.4.212.119 port 38180
2020-03-23T00:05:35.754882+01:00 linux-mhfa sshd[25386]: Invalid user p@ssword from 142.4.212.119 port 38864
2020-03-23T00:05:35.755018+01:00 linux-mhfa sshd[25381]: Invalid user password0 from 142.4.212.119 port 38378
2020-03-23T00:05:35.755159+01:00 linux-mhfa sshd[25383]: Invalid user Pa$$word from 142.4.212.119 port 38668
2020-03-23T00:05:35.755356+01:00 linux-mhfa sshd[25377]: Invalid user Password from 142.4.212.119 port 37984
2020-03-23T00:05:35.757595+01:00 linux-mhfa sshd[25388]: Invalid user passw0rd from 142.4.212.119 port 38962
2020-03-23T00:05:35.772529+01:00 linux-mhfa sshd[25382]: Invalid user Pa$$w0rd from 142.4.212.119 port 38468
2020-03-23T00:05:35.782532+01:00 linux-mhfa sshd[25374]: Invalid user 12345678@ from 142.4.212.119 port 37494
2020-03-23T00:35:08.724584+01:00 linux-mhfa sshd[1446]: Invalid user oracle from 118.70.216.153 port 56966
2020-03-23T00:35:49.465308+01:00 linux-mhfa sshd[1855]: Invalid user oracle from 118.70.216.153 port 46382
2020-03-23T00:36:31.524259+01:00 linux-mhfa sshd[1858]: Invalid user oracle from 118.70.216.153 port 35782
2020-03-23T00:37:11.081861+01:00 linux-mhfa sshd[2274]: Invalid user oracle from 118.70.216.153 port 53420
2020-03-23T00:37:51.535859+01:00 linux-mhfa sshd[2278]: Invalid user ubuntu from 118.70.216.153 port 42848
2020-03-23T00:38:32.370756+01:00 linux-mhfa sshd[2483]: Invalid user ubuntu from 118.70.216.153 port 60484
2020-03-23T00:39:12.989910+01:00 linux-mhfa sshd[2895]: Invalid user ubuntu from 118.70.216.153 port 49894
2020-03-23T00:39:54.617911+01:00 linux-mhfa sshd[2899]: Invalid user ubuntu from 118.70.216.153 port 39306
2020-03-23T00:40:35.356208+01:00 linux-mhfa sshd[3104]: Invalid user ubuntu from 118.70.216.153 port 56948
2020-03-23T00:41:16.783169+01:00 linux-mhfa sshd[3310]: Invalid user postgres from 118.70.216.153 port 46362
2020-03-23T00:41:59.729988+01:00 linux-mhfa sshd[3515]: Invalid user postgres from 118.70.216.153 port 35768
2020-03-23T00:42:41.591228+01:00 linux-mhfa sshd[3720]: Invalid user postgres from 118.70.216.153 port 53376
2020-03-23T00:43:23.110168+01:00 linux-mhfa sshd[3927]: Invalid user postgres from 118.70.216.153 port 42822
2020-03-23T00:44:05.720609+01:00 linux-mhfa sshd[4132]: Invalid user user from 118.70.216.153 port 60488
2020-03-23T00:44:48.658791+01:00 linux-mhfa sshd[4338]: Invalid user user from 118.70.216.153 port 49876
2020-03-23T00:45:33.105449+01:00 linux-mhfa sshd[4359]: Invalid user user from 118.70.216.153 port 39284
2020-03-23T00:46:15.984461+01:00 linux-mhfa sshd[4769]: Invalid user user from 118.70.216.153 port 56912
2020-03-23T00:46:57.821091+01:00 linux-mhfa sshd[4980]: Invalid user user from 118.70.216.153 port 46334
2020-03-23T00:47:40.859350+01:00 linux-mhfa sshd[5184]: Invalid user user from 118.70.216.153 port 35744
2020-03-23T00:48:22.880565+01:00 linux-mhfa sshd[5390]: Invalid user test from 118.70.216.153 port 53390
2020-03-23T00:49:05.980991+01:00 linux-mhfa sshd[5594]: Invalid user test from 118.70.216.153 port 42802
2020-03-23T00:49:49.228431+01:00 linux-mhfa sshd[5800]: Invalid user test from 118.70.216.153 port 60446
2020-03-23T00:50:32.428231+01:00 linux-mhfa sshd[6209]: Invalid user test from 118.70.216.153 port 49848
2020-03-23T00:51:14.753485+01:00 linux-mhfa sshd[6211]: Invalid user test from 118.70.216.153 port 39264
2020-03-23T00:51:58.909596+01:00 linux-mhfa sshd[6419]: Invalid user nagios from 118.70.216.153 port 56898
2020-03-23T00:52:43.709153+01:00 linux-mhfa sshd[6625]: Invalid user nagios from 118.70.216.153 port 46286
.
.
.↧
TUMBLEWEED ffmpeg and k3b-codecs Won't Install
I've dowloaded the YaST Meta Pakcage from http://opensuse-community.org/ and switched system packages to Packman too, but I keep on getting this:
![]()
↧
↧
установка Google Chrome в SLES 11.4
Здравствуйте, прошу помощи, так как обширный поиск в браузере ничего не дал.
При установке через репозиторий гугла или через скачаный пакет google____.rpm терминал выдаёт ошибку:
--------------ничто не предоставляет ca-certificates, необходимый для google-chrome
Вот полностью окно терминала:
igor@SLES:~/Загрузки> zypper in google-chrome-stable_current_x86_64.rpm
Root privileges are required for installing or uninstalling packages.
igor@SLES:~/Загрузки> sudo zypper in google-chrome-stable_current_x86_64.rpm
root's password:
Refreshing service 'nu_novell_com'.
Loading repository data...
Reading installed packages...
Разрешение зависимостей пакетов...
Проблема:ничто не предоставляет ca-certificates, необходимый для google-chrome-stable-80.0.3987.149-1.x86_64
Решение 1: не устанавливать google-chrome-stable-80.0.3987.149-1.x86_64
Решение 2: прервать google-chrome-stable-80.0.3987.149-1.x86_64, игнорируя некоторые из его зависимостей
Выберите по номеру одно из вышеуказанных решений или отмените [1/2/о] (о): 1
Разрешение зависимостей...
Разрешение зависимостей пакетов...
Нечего выполнять.
igor@SLES:~/Загрузки>
я так понял, проблема с каким-то сертифификатом, но найти, как это исправить не смог.
При установке через репозиторий гугла или через скачаный пакет google____.rpm терминал выдаёт ошибку:
--------------ничто не предоставляет ca-certificates, необходимый для google-chrome
Вот полностью окно терминала:
igor@SLES:~/Загрузки> zypper in google-chrome-stable_current_x86_64.rpm
Root privileges are required for installing or uninstalling packages.
igor@SLES:~/Загрузки> sudo zypper in google-chrome-stable_current_x86_64.rpm
root's password:
Refreshing service 'nu_novell_com'.
Loading repository data...
Reading installed packages...
Разрешение зависимостей пакетов...
Проблема:ничто не предоставляет ca-certificates, необходимый для google-chrome-stable-80.0.3987.149-1.x86_64
Решение 1: не устанавливать google-chrome-stable-80.0.3987.149-1.x86_64
Решение 2: прервать google-chrome-stable-80.0.3987.149-1.x86_64, игнорируя некоторые из его зависимостей
Выберите по номеру одно из вышеуказанных решений или отмените [1/2/о] (о): 1
Разрешение зависимостей...
Разрешение зависимостей пакетов...
Нечего выполнять.
igor@SLES:~/Загрузки>
я так понял, проблема с каким-то сертифификатом, но найти, как это исправить не смог.
↧
LEAP 15.1 ImportError: No module named pythonbuildservice.jenkinsutil
Hello,
I am getting below while running my python script.
ImportError: No module named pythonbuildservice.jenkinsutil
# python --version
Python 2.7.14
I am getting below while running my python script.
ImportError: No module named pythonbuildservice.jenkinsutil
# python --version
Python 2.7.14
↧
sharing data between linux distros
I need share some data between linux distros installed on hdd. Does it matter if these will be placed for example in /shareddata or /home/shareddata ?
I guess the most recommended way is to create partition for data only, but reason in this case is utilizing free disk space of existing distros without changing partitions.
I guess the most recommended way is to create partition for data only, but reason in this case is utilizing free disk space of existing distros without changing partitions.
↧